Cangaroo Wing Baby Crib 120x60 cm - Instruction Manual

Introduction

Thank you for choosing the Cangaroo Wing Baby Crib. This manual provides essential information for the safe assembly, operation, and maintenance of your new baby crib. Please read these instructions carefully before assembly and keep them for future reference. This crib is designed to provide a safe and comfortable sleeping environment for your baby from birth.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always ensure all assembly fittings are correctly tightened. Regularly check all screws and bolts to ensure they are secure.
• Do not use the crib if any parts are broken, torn, or missing. Contact Cangaroo for replacement parts. Do not substitute parts.
• The maximum weight capacity for this crib is 15 kg. Discontinue use when your child begins to climb out or reaches the maximum weight, whichever comes first.
• Use only a mattress that is 120 x 60 x 10 cm (length x width x thickness). The mattress should be firm and fit snugly, leaving no gaps larger than 3 cm between the mattress and the crib sides.
• To prevent falls, when the child is able to sit up, adjust the mattress base to the lowest position.
• Keep the crib away from windows, blinds, cords, and any objects that could pose a strangulation hazard.
• Do not place items in the crib that could be used as a foothold for climbing out or that could pose a suffocation risk.
• Never leave your child unattended in the crib.
• This crib is suitable for use from birth.

Package Contents

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Crib frame components (headboards, side rails)
• Adjustable mattress base
• 4 wheels with brakes
• Hardware pack (screws, bolts, Allen key)
• Instruction manual

Setup and Assembly

Assembly of the Cangaroo Wing Baby Crib is required. It is recommended that two adults assemble the crib to ensure stability and ease of construction. Follow the detailed assembly instructions provided in the separate assembly guide included with your purchase. Ensure all connections are tight before use.

Image: The Cangaroo Wing Baby Crib, fully assembled, showcasing its white beech wood construction, slatted sides for air circulation, and integrated wheels for mobility.

Image: An alternative view of the Cangaroo Wing Baby Crib, providing a comprehensive look at its design and structural integrity.

Operating Instructions

Adjusting Mattress Height

The crib features a mattress base with 3 adjustable height positions to accommodate your child's growth. For newborns, the highest position allows for easier access. As your child grows and becomes more active, lower the mattress base to prevent climbing out. Refer to your assembly guide for specific instructions on how to safely adjust the mattress base height.

Image: A top-down perspective of the crib's slatted mattress base, illustrating its construction and how it supports the mattress at various height settings.

Using the Wheels

The crib is equipped with 4 wheels, each with a stopper, allowing for easy movement and secure positioning. To move the crib, unlock all four stoppers. To secure the crib in place, press down on the stopper mechanism on each wheel until it clicks into the locked position. Always ensure the wheels are locked when the crib is stationary and a child is inside.

Lowering One Side

One side of the crib is designed to be lowered for easier access to your baby, especially during nighttime feedings or when placing your baby into the crib. Consult your assembly guide for the specific mechanism and safe operation of the lowerable side. Always ensure the side is securely locked in the raised position when the crib is unattended or when your child is active.

Image: Detailed views of the crib's features, including the mechanism that allows one side to be lowered for convenience and a wheel with its integrated brake for stability.

Maintenance

• Cleaning: Clean the crib regularly with a damp cloth and mild soap. Avoid abrasive cleaners or strong chemicals that could damage the wood finish.
• Inspections: Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Tighten any loose fasteners immediately.
• Storage: If storing the crib, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight or extreme temperatures.
• Wood Care: The crib is made from high-quality beech wood. Avoid prolonged exposure to moisture.

Troubleshooting

• Crib feels wobbly: Check all assembly screws and bolts. Ensure they are fully tightened.
• Difficulty adjusting mattress height: Ensure no obstructions are present and that the mechanism is aligned correctly. Refer to the assembly guide for specific steps.
• Wheels not locking/unlocking: Check for debris in the wheel mechanism. Ensure the stopper is fully engaged or disengaged.
• Side not lowering smoothly: Inspect the lowering mechanism for any obstructions or misalignment. Ensure all associated hardware is secure.

If you encounter issues not listed here or require further assistance, please contact Cangaroo customer support.

Specifications

Warranty and Support

Warranty information for your Cangaroo Wing Baby Crib is typically provided with your purchase documentation. Please retain your proof of purchase for any warranty claims.

For technical support, replacement parts, or any questions regarding your product, please contact Cangaroo customer service. Contact details can usually be found on the Cangaroo official website or on your product packaging.