1. Introduction
Product Overview
This versatile Philco power strip features 3 AC outlets and a 30W USB-C fast charging port, along with 2 USB-A ports, providing convenient multi-device charging for all your essential electronics. Designed with an Over Current Protection (OCP) switch, it ensures safe and reliable power for notebooks, laptops, phones, and tablets without the risk of overheating. The 6-foot extension cord offers flexibility for placement in home, office, or travel settings, while the compact, travel-friendly design makes it easy to carry on the go. Whether you need to power up a notebook, charge your phone, or connect multiple devices at once, this power strip is the perfect solution for keeping all your devices powered and protected in one compact unit.
Figure 1.1: Philco Power Strip with its packaging, highlighting key features like 30W GaN, OCP switch, 3 AC outlets, 6ft cord, and USB ports.
2. Product Features
- 3 AC Outlets: Widely spaced for multi-device power, suitable for home, office, or travel.
- 30W Fast Charging USB-C Port: Delivers rapid charging for notebooks, tablets, and phones.
- 2 USB-A Ports: Keeps other devices powered up, helping to reduce cable clutter.
- Over Current Protection (OCP) Switch: Built-in safety feature to protect devices from overheating or power spikes.
- 6-Foot Extension Cord: Provides extended reach and flexible placement options.
- Compact & Travel-Friendly Design: Lightweight and portable for easy transport.
- Flat Plug: Allows for convenient placement behind furniture.
- LED Indicator: Clearly shows power status.
Figure 2.1: Diagram illustrating the product specifications, including the On/Off switch with LED indicator, 3 AC outlets, 2 USB-A ports, and 1 Type-C port.
3. Setup and Installation
- Unpack the Power Strip: Carefully remove the power strip from its packaging.
- Choose a Location: Select a dry indoor location with adequate ventilation. The 6-foot extension cord provides flexibility for placement. Consider using the mountable design for fixed installations.
- Plug into Wall Outlet: Insert the flat plug of the power strip into a standard 120V AC wall outlet. The flat design allows it to fit snugly behind furniture.
- Power On: Press the On/Off switch located on the power strip. The LED indicator will illuminate, indicating that the power strip is active and ready for use.
Figure 3.1: Image demonstrating the mountable design of the power strip, showing it attached to a wall with devices plugged in.
4. Operating Instructions
Connecting Devices
- AC Outlets: Plug your AC-powered devices (e.g., laptops, lamps, small appliances) directly into the 3 AC outlets. Ensure the total power consumption does not exceed the power strip's maximum rating.
- USB-C Port: For fast charging compatible devices such as notebooks, tablets, and smartphones, connect them to the 30W USB-C port using an appropriate USB-C cable.
- USB-A Ports: Connect your USB-A powered devices, like older smartphones, smartwatches, or other accessories, to the 2 USB-A ports.
Over Current Protection (OCP)
The power strip is equipped with an Over Current Protection (OCP) switch. In the event of an overload or short circuit, the OCP switch will automatically trip to protect your connected devices and the power strip itself. If this occurs, disconnect some devices, then press the OCP switch to reset the power strip.
Figure 4.1: Image showing the power strip connected to various devices, including a laptop, tablet, smartphone, and smartwatch, demonstrating its universal compatibility.
Figure 4.2: Examples of the power strip's multi-use applications in a kitchen setting (blender and phone charging) and an office setting (laptop and phone charging).
5. Maintenance and Care
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive chemicals.
- Storage: When not in use, store the power strip in a cool, dry place away from direct sunlight and moisture.
- Avoid Overloading: Do not exceed the maximum electrical rating of the power strip. This can lead to overheating and potential damage.
- Inspect Regularly: Periodically check the power cord and the power strip for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to devices. | Power strip is not plugged in, On/Off switch is off, or OCP switch has tripped. | Ensure the power strip is securely plugged into a live wall outlet. Press the On/Off switch to the 'On' position. If the OCP switch has tripped, unplug some devices and press the switch to reset. |
| Devices charging slowly. | Device not compatible with fast charging, or using a non-optimal cable. | Ensure your device supports 30W USB-C Power Delivery (PD) for fast charging. Use a high-quality, compatible charging cable. |
| Power strip feels warm. | Normal operation, or overloaded. | A slight warmth during operation is normal. If it feels excessively hot, unplug devices immediately and check total power consumption against specifications. Ensure proper ventilation. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5 x 2 x 0.1 inches |
| Item Weight | 12 ounces |
| Total AC Outlets | 3 |
| USB-C Port | 1 (30W Power Delivery) |
| USB-A Ports | 2 |
| Extension Cord Length | 6 feet |
| Voltage | 120 Volts (AC) |
| Color | White |
| Special Features | On/Off Switch, Lightweight, Mountable, LED Indicator, Wide Spaced Outlets, Over Current Protection (OCP) |
8. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Philco website. You may also contact Philco customer service directly for assistance with product inquiries, troubleshooting, or replacement parts.
Online Support: Visit the Philco Store on Amazon
