1. Introduction
Thank you for purchasing the NACON PS5SCHARGESTAND. This product is designed to enhance your PlayStation 5 gaming experience by providing a stable vertical stand for your console, charging capabilities for two DualSense controllers, and organized storage for your game cases. Please read this manual carefully before use to ensure proper installation and operation.
2. Package Contents
Please verify that all items listed below are included in your package:
- NACON PS5SCHARGESTAND Base
- Fixing Screw (for console stability)
- Integrated Game Storage Rack
Note: PlayStation 5 console, DualSense controllers, and games are not included.
3. Setup Instructions
- Unpack the Stand: Carefully remove the NACON PS5SCHARGESTAND from its packaging.
- Position the Console: Place your PlayStation 5 console vertically onto the stand. Ensure the console is aligned correctly with the stand's base.
- Secure the Console: Locate the fixing screw provided. Insert the screw through the designated hole in the stand's base and tighten it into the console's screw port to secure the console firmly in a vertical position. This prevents accidental movement.
- Connect Power: Connect the power cable (not included, typically uses the PS5's USB port for power) to the stand. The stand requires a wired power source.
- Organize Games: Utilize the integrated storage rack to organize up to a dozen game cases. Insert game cases into the slots provided at the rear of the stand.
Image Description: An exploded view diagram showing the components of the NACON PS5SCHARGESTAND, including the base, the fixing screw, and the game storage slots. A USB cable is depicted connecting to the stand, indicating power input.
4. Operating Instructions
4.1. Charging DualSense Controllers
- Place Controllers: Gently place up to two DualSense controllers onto the charging ports located on the front of the stand. Ensure they are properly seated.
- Monitor Charge Indicator: The stand features a luminous charge indicator. This indicator will illuminate to show the charging status of the controllers. A full charge typically takes approximately 4 hours.
- Remove Controllers: Once charging is complete, carefully lift the controllers from the charging ports.
4.2. Using the Headset Holder
The stand includes a dedicated hook for hanging your gaming headset, keeping your setup tidy and organized.
Image Description: A complete setup of the NACON PS5SCHARGESTAND with a PlayStation 5 console, two DualSense controllers charging, a headset hanging on the holder, and several game cases stored in the rack. This image demonstrates the product in full use.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the stand. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the stand in a cool, dry place away from direct sunlight.
- Avoid Liquids: Keep the stand away from water and other liquids to prevent damage.
6. Troubleshooting
6.1. Controllers Not Charging
- Ensure the stand is properly connected to a power source (e.g., a USB port on your PS5 or a compatible USB wall adapter).
- Verify that the DualSense controllers are correctly seated on the charging ports.
- Check if the charge indicator lights are active.
- Try charging one controller at a time to isolate the issue.
6.2. Console Not Stable
- Confirm that the fixing screw is securely tightened to hold the console in place.
- Ensure the stand is placed on a flat, stable surface.
6.3. General Issues
- Disconnect and reconnect the power cable to reset the stand.
- If problems persist, refer to the NACON support website for further assistance.
7. Product Specifications
| Feature | Detail |
|---|---|
| Model | PS5SCHARGESTAND |
| Brand | NACON |
| Compatible Platform | PlayStation 5 |
| Charging Time (DualSense) | Approx. 4 hours |
| Power Input | Wired (USB) |
| Wattage | 15 watts |
| Material | Plastic |
| Dimensions | 3.7 x 20.7 x 22.8 cm |
| Weight | 400 g |
| Additional Features | Luminous charge indicator, Integrated game storage (up to 12 games), Headset holder, Console fixing screw |
8. Warranty and Support
NACON products are designed for quality and reliability. For warranty information, technical support, or service inquiries, please visit the official NACON website or contact your local retailer.
Manufacturer: Nacon
Contact Information: Refer to the product packaging or official NACON website for detailed support contact information.
Image Description: The back of the NACON PS5SCHARGESTAND product packaging, showing multilingual descriptions of features (English, French, Spanish, Italian, German, Dutch), recycling symbols, and the product barcode (3665962024975).
For more information, visit: www.nacongaming.com
