1. Introduction
The EdenPURE GEN40 PLUS is an infrared space heater and cooler designed to provide supplemental zone heating and refreshing airflow for year-round comfort. It features a 1500W PTC-ceramic far-infrared heating element, fan-only mode, and oscillation, making it suitable for spaces up to 1,000 sq ft in well-insulated areas. This manual provides essential information for the safe and efficient operation of your device.
2. Important Safety Information
Please read all safety warnings and instructions before using this heater to reduce the risk of fire, electric shock, or injury. Keep this manual for future reference.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- This heater includes an automatic tip-over switch and overheat protection. If the heater tips over or overheats, it will automatically shut off.
- Always place the unit on a flat, level surface with proper clearance around it for optimal airflow.
3. Product Features
- Far-Infrared PTC Ceramic Heating Technology: Delivers fast, even warmth without drying the air.
- Dual Heat and Cool Function: Offers high heat, low heat, or fan-only mode for year-round use.
- Wide-Area Coverage with Oscillation: Designed to cover up to 1,000 sq ft in well-insulated spaces, distributing heat or airflow evenly.
- Built-In Safety: Features automatic tip-over and overheat shut-off protection.
- Portable & Compact: Lightweight design with a built-in carry handle for easy room-to-room use.
- Simple Controls: Straightforward operation with quick mode changes.
4. Components Overview
5. Setup
- Unpack: Carefully remove the heater from its packaging. Retain packaging for storage.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clearance from any walls, furniture, or other objects. Do not block air intakes or outlets.
- Power Connection: Plug the power cord directly into a grounded 110V AC wall outlet. Do not use extension cords or power strips.
6. Operating Instructions
The control panel is located on the front of the unit. It includes buttons for Power, Set Temperature, Room Temperature display, Mode selection, and Up/Down arrows for temperature adjustment.
- Power On/Off: Press the POWER button to turn the unit on or off. The unit will enter standby mode when first plugged in.
- Select Mode: After powering on, press the MODE button to cycle through available modes: AUTO, HIGH, LOW, and FAN-ONLY. The corresponding indicator light will illuminate.
- Adjust Temperature (Heat Modes): In AUTO, HIGH, or LOW heat modes, use the Up (▲) and Down (▼) arrows to set your desired room temperature. The display will blink to confirm the setting.
- Oscillation: Press the OSCILLATION button (often integrated with mode or a separate button, refer to specific unit markings) to activate or deactivate the wide-angle oscillation feature.
- Fan-Only Mode: Select FAN-ONLY mode for refreshing airflow without heat.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your EdenPURE GEN40 PLUS heater.
- Filter Cleaning: The heater is equipped with a reusable metal mesh filter located at the back. Regularly check and clean the filter to prevent dust buildup, which can affect performance. To clean, gently remove the filter, wash it in the sink with water, and ensure it is completely dry before reinserting.
- Exterior Cleaning: Wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Power cord not fully plugged in; filter not properly secured. | Ensure the power cord is firmly plugged into a grounded outlet. Check that the rear filter is correctly clipped into place, as this acts as a safety switch. |
| Heater turns off unexpectedly. | Tip-over switch activated; overheat protection activated. | Ensure the heater is on a stable, level surface. Check for obstructions around the air intake/outlet. Allow the unit to cool down before restarting. |
| Thermostat does not maintain set temperature accurately. | Room size/insulation; unit placement; Eco mode behavior. | Performance varies with room conditions. Ensure doors/windows are closed. In Eco mode, the heater may cycle between high and low heat to maintain temperature, rather than shutting off completely. Adjust set temperature as needed. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | EdenPURE |
| Model Number | A5946 |
| Power Output | 1500W max |
| Heating Element | Far-infrared PTC ceramic |
| Voltage | 110 Volts (AC) |
| Amperage | 14.5 Amps |
| Heating Coverage | Up to 1000 sq ft (in well-insulated spaces) |
| Max Temperature Setting | 95 Degrees Fahrenheit |
| Special Features | Adjustable Speed, Digital Display, Oscillating |
| Product Dimensions | 8"D x 8"W x 19.75"H |
| Item Weight | 5.3 pounds |
| UPC | 827463006192 |
10. Warranty and Support
For warranty information or technical support, please contact EdenPURE customer service. Refer to the product packaging or the official EdenPURE website for the most up-to-date contact details.
