Introduction
This manual provides comprehensive instructions for the safe and efficient use of your BWT Homeside 2.6L Water Filter Jug. Please read this manual carefully before first use and keep it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your water filter jug.
Safety Instructions
- Only use the BWT Homeside water filter jug with cold tap water. Do not filter hot water.
- Do not expose the water filter jug to direct sunlight or extreme temperatures.
- Keep the water filter jug and cartridges out of reach of children.
- Do not use the filter cartridge if the packaging is damaged.
- Ensure the filter cartridge is replaced every 4 weeks to maintain water quality and hygiene.
- The jug is dishwasher safe, but the lid with the manual indicator should be washed by hand.
- Do not use abrasive cleaners or scouring pads on any part of the jug.
Package Contents
Your BWT Homeside 2.6L Water Filter Jug package includes:
- 1 x BWT Homeside Water Filter Jug (2.6L total capacity)
- 1 x BWT Filter Cartridge
Setup
1. Unpacking and Cleaning
Remove all packaging materials. Wash the jug (excluding the lid with the manual indicator) in warm soapy water or in a dishwasher. Rinse thoroughly. Hand wash the lid.
2. Preparing the Filter Cartridge
Before first use, immerse the new filter cartridge completely in cold water for approximately 5 minutes. Gently shake it to remove any air bubbles. This prepares the filter for optimal performance.
Image: A BWT water filter cartridge, ready for preparation.
3. Inserting the Filter Cartridge
Place the prepared filter cartridge firmly into the funnel inside the jug. Ensure it is seated correctly to prevent unfiltered water from bypassing the filter.
Image: Exploded view showing the filter cartridge, funnel, lid with manual indicator, and jug. This illustrates how the components fit together.
4. Initial Filtration
Fill the jug with cold tap water. Discard the first two filtered fillings. This flushes out any loose filter material and activates the filter. The third filling is ready for consumption.
5. Setting the Manual Filter Change Indicator
The lid features a manual indicator to remind you when to change the filter. Set the indicator to the current date or 4 weeks from the current date to track the filter's lifespan.
Operating Instructions
Filling the Jug
To fill the jug, simply hold it under the tap. The automatic refill flap on the lid will open as water flows in, allowing for easy and mess-free filling without removing the lid.
Image: A BWT water filter jug being used to pour filtered water into a kettle, demonstrating its practical application for household appliances.
Filtration Process
Water flows through the filter cartridge, where activated carbon and ion exchange resin work to reduce limescale, chlorine, and heavy metals like lead and copper. The filtered water collects in the main jug reservoir.
Image: A detailed diagram illustrating the internal structure of the filter cartridge, highlighting the fine filter, activated carbon granules, and ion exchanger resin layers responsible for purification.
Daily Use
Use the filtered water for drinking, preparing hot and cold beverages, and cooking. Filtered water helps protect household appliances from limescale buildup.
Maintenance
Filter Cartridge Replacement
For optimal performance and hygiene, replace the filter cartridge every 4 weeks. Refer to the manual indicator on the lid for a reminder.
- Remove the old filter cartridge from the funnel.
- Prepare a new BWT filter cartridge as described in the "Setup" section (immerse in cold water for 5 minutes).
- Insert the new cartridge firmly into the funnel.
- Discard the first two filtered fillings.
- Reset the manual filter change indicator on the lid.
Cleaning the Jug
The BWT Homeside jug (excluding the lid with the manual indicator) is dishwasher safe. For the lid, wash by hand with mild detergent and rinse thoroughly. Do not use abrasive cleaning agents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow filtration | Air bubbles in the filter; filter cartridge is old or clogged. | Remove the filter, shake it gently under water to release air. If the filter is old, replace it. |
| Unusual taste or odor in filtered water | Filter cartridge not properly prepared; filter cartridge is old. | Ensure the filter was soaked before first use. Replace the filter cartridge if it's past its 4-week lifespan. |
| Water not filtering | Filter cartridge not seated correctly. | Remove and re-insert the filter cartridge, ensuring it is firmly in place. |
Specifications
- Brand: BWT
- Model Name: Homeside
- Model Number: 815724
- Color: Black
- Total Capacity: 2.6 Liters
- Filtered Water Capacity: Approximately 1.3 Liters
- Dimensions (L x W x H): 27 cm x 12 cm x 29 cm
- Material: Plastic (Jug), Activated Carbon, Ion Exchange Resin (Filter)
- Purification Method: Activated Carbon, Ion Exchange
- Filter Lifespan: 4 Weeks
- Maximum TDS Supported: 1500 PPM
- Special Features: Limescale reduction, Chlorine reduction, Heavy metal filtration (Lead, Copper), Manual filter change indicator, Automatic refill flap, Dishwasher safe (jug only).
- Country of Origin: Austria
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official BWT website. Keep your proof of purchase for any warranty claims.
