Rauwseul HC-CUP 6 (2301C)

Portable 12V Car Kettle User Manual

Model: HC-CUP 6 (2301C) | Brand: Rauwseul

Product Overview

The Rauwseul Portable 12V Car Kettle is designed for convenient water heating on the go. This compact electric kettle allows you to quickly boil water for beverages like tea, coffee, or instant noodles directly from your vehicle's 12V power outlet. It features a food-grade 304 stainless steel inner liner, automatic shut-off, and a sealed design to prevent leaks, making it ideal for travel.

Portable 12V Car Kettle with power cord

Image: The portable 12V car kettle shown alongside its detachable power cord, which connects to a car's cigarette lighter socket.

Setup and First Use

  1. Unpack: Carefully remove the kettle and all accessories from the packaging. Ensure all components listed in the package contents (kettle, power cable, user manual) are present.
  2. Initial Cleaning: Before first use, clean the inside of the kettle with warm water and a mild detergent. Rinse thoroughly with clean water. Do not immerse the exterior of the kettle or the power base in water.
  3. Placement: Place the kettle in a stable, upright position, ideally in a car cup holder, to prevent tipping during use.
  4. Connect Power: Insert the power cable into the kettle's power port, then plug the other end (cigarette lighter plug) into your vehicle's 12V DC power outlet. Ensure a secure connection.
Portable car kettle placed in a car cup holder

Image: The portable car kettle securely placed in a vehicle's cup holder, indicating its compact design for in-car use.

Operating Instructions

  1. Fill with Water: Open the lid and fill the kettle with potable water. Do not exceed the maximum fill line (350ml capacity). Ensure the silicone sealing plug on the lid is open during boiling to allow steam to escape.
  2. Hand pouring water into the portable car kettle

    Image: A hand pouring water from a bottle into the portable car kettle, illustrating the filling process. The image also highlights the 350ml capacity and 80W power, noting it takes approximately 25 minutes to boil.

  3. Start Boiling: Close the lid securely. Press the operation key (button) on the kettle to begin the heating process. The kettle will heat water to approximately 100°C (with a tolerance of 3-4°C). This process typically takes about 25 minutes.
  4. Automatic Shut-off: The kettle will automatically shut off once the water reaches boiling temperature, ensuring safe operation.
  5. Automatic Restart (if connected): If the power cable remains connected after boiling, the kettle will automatically restart heating when the water temperature drops to approximately 75°C. To prevent continuous heating, disconnect the power cable after use or turn off the vehicle's ignition.
  6. Sealed Design for Portability: After boiling, allow the kettle to rest for 3 minutes. Then, securely tighten the silicone sealing plug on the lid. The sealed design prevents leaks, allowing you to safely carry the kettle in your bag.
  7. Portable car kettle demonstrating sealed design with no water leakage

    Image: The portable car kettle tilted, illustrating its sealed design that prevents water leakage, making it suitable for travel.

Important Safety Notes:

  • Only heat potable water. Do not attempt to boil food directly in the kettle.
  • The boiling point of water can vary with altitude.
  • Do not shake the water cup immediately after heating, as this can create high-pressure steam and cause burns.
  • Always ensure the silicone sealing plug is open during boiling to release steam.

Maintenance and Cleaning

Regular cleaning ensures the longevity and optimal performance of your kettle.

  • Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. For stubborn stains, a mild detergent can be used. Ensure the surface is dry before storage or next use.
  • Interior Cleaning: The food-grade 304 stainless steel inner liner is molded in one piece without seams, making it easy to clean. Rinse the interior with water after each use.
  • Descaling: Over time, mineral deposits (limescale) may accumulate, especially in areas with hard water. To descale, fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a commercial descaling solution. Heat the mixture (do not boil if using vinegar, just heat to warm), let it sit for 30 minutes to an hour, then discard the solution and rinse the kettle thoroughly several times with clean water.
  • Storage: Store the kettle in a dry place when not in use.
Diagram showing internal components of the kettle

Image: An exploded view diagram of the kettle, highlighting the food-grade 304 stainless steel inner liner, the operation key, and the food-grade PC and silicone materials, emphasizing their non-toxic and BPA-free properties.

Troubleshooting

ProblemPossible CauseSolution
Kettle does not heat.No power from vehicle outlet; Loose connection; Kettle malfunction.Check vehicle's 12V outlet for power; Ensure power cable is securely plugged into both kettle and outlet; Contact customer support if issue persists.
Water not boiling to 100°C.Altitude affects boiling point; Insufficient heating time.Boiling point naturally decreases at higher altitudes; Allow full 25 minutes for heating.
Kettle leaks.Lid not securely closed; Silicone plug not tightened after boiling.Ensure lid is fully closed; After boiling and cooling for 3 minutes, securely tighten the silicone plug.
Unusual odor during boiling.First use odor; Residue inside.Perform initial cleaning as per setup instructions; Ensure thorough rinsing after each use. The food-grade 304 stainless steel should not produce odors.

Specifications

BrandRauwseul
Model Number2301C (HC-CUP 6)
Color12V Grey
MaterialPC + Food-grade 304 Stainless Steel
Capacity350 ml
Rated Power80 Watts
Rated Voltage12 Volts DC
Heating SpeedApprox. 25 minutes to 100°C
Dimensions (L x W x H)6.6 x 6.6 x 22.1 cm (2.6 x 2.6 x 8.7 inches)
Weight530 grams (1.17 lbs)
Special FeaturesAutomatic Shut-off, Removable Cord, Double Wall, Portable, Boil-dry Protection
Diagram showing dimensions of the portable car kettle

Image: A diagram illustrating the key dimensions of the portable car kettle, including its height (220mm / 8.66in) and maximum diameter (78.8mm / 3.1in).

Warranty and Support

This product comes with a standard return policy, typically allowing returns or replacements within 30 days of purchase. For any questions, concerns, or technical assistance, please contact the manufacturer's customer support team. Rauwseul is committed to customer satisfaction and continuously improves its products and services.

For support, please refer to the contact information provided with your purchase or visit the official Rauwseul brand page on Amazon.

© 2024 Rauwseul. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Related Documents - HC-CUP 6 (2301C)

Preview Codan Radio Communications Product Catalog and Pricing
Explore the comprehensive product catalog and pricing for Codan Radio Communications, featuring a wide range of radio equipment, accessories, and software solutions. Find detailed product numbers and descriptions for amplifiers, antennas, cables, software licenses, and more.
Preview Könner & Söhnen: Генератори, Електростанції та Сонячні Системи | Каталог Продукції
Ознайомтеся з повним каталогом Könner & Söhnen: інверторні, бензинові, дизельні генератори, портативні електростанції, сонячні системи та акумулятори. Надійні енергетичні рішення з німецькою якістю.
Preview TCI Listino Prezzi 2026 - Componenti per Illuminazione
Listino prezzi 2026 per componenti di illuminazione TCI, inclusi alimentatori, driver LED e accessori. Trova codici prodotto, descrizioni e pagine di riferimento.
Preview QSC and Q-SYS Product ECCN and CCATS Compliance Data
Comprehensive list of QSC and Q-SYS product models, their Export Control Classification Numbers (ECCN), and CCATS for compliance purposes. Includes amplifiers, loudspeakers, mixers, and accessories.
Preview USB Type-C Tester Series: KWS-2301C, KWS-2302C, and KWS-2303C User Guide
Comprehensive user guide and technical specifications for the KWS-2301C, KWS-2302C, and KWS-2303C USB Type-C power meters. Learn about features, display types, and measurement capabilities.
Preview KOWSI KWS-2303C Type-C USB Tester - Voltage, Current, Power Meter
Accurate and versatile KOWSI KWS-2303C Type-C USB tester for real-time monitoring of voltage (4-30V), current (0-12A), power (0-360W), capacity, and energy. Features a 1.06-inch TFT display, bidirectional current measurement, and power-down data saving.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.