1. Introduction
Thank you for purchasing the Vactidy V7 Cordless Vacuum Cleaner. This manual provides important information on the safe operation, assembly, use, and maintenance of your new vacuum cleaner. Please read this manual thoroughly before use and keep it for future reference.
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance.
- Read all instructions before using the appliance.
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without dust cup and/or filters in place.
- Turn off all controls before unplugging.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Store the appliance indoors. Put away after use to prevent accidents.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
- Recharge only with the charger specified by the manufacturer.
3. Package Contents
Verify that all components are present in the package:
- Main Vacuum Unit (with battery)
- Brushless Motor Head (Floor Head)
- Plastic Pipe (Extension Wand)
- 2-in-1 Crevice Nozzle
- Adapter (Charger)
- Charging Stand
- HEPA Filters (3 pieces)
- User Manual (Japanese)
4. Assembly
The Vactidy V7 can be assembled in two main configurations: as a stick vacuum or as a handheld vacuum.
4.1. Stick Vacuum Assembly
- Insert the plastic pipe (extension wand) into the main vacuum unit until it clicks into place.
- Attach the brushless motor head (floor head) to the other end of the plastic pipe until it clicks into place.
4.2. Handheld Vacuum Assembly
- Directly attach the desired accessory (e.g., 2-in-1 crevice nozzle) to the main vacuum unit until it clicks into place.
5. Charging
Before first use, fully charge the vacuum cleaner. The Vactidy V7 features a convenient charging stand for easy storage and charging.
- Place the charging stand on a flat, stable surface.
- Connect the adapter to the charging stand and plug it into a power outlet.
- Place the main vacuum unit onto the charging stand. Ensure the charging contacts align.
- The indicator lights on the vacuum will show the charging status. A full charge typically takes 4-5 hours.
Note: Continuous operating time and charging time may vary depending on room temperature and usage environment.
6. Operation
The Vactidy V7 offers versatile cleaning with its 2-way design and multiple operating modes.
6.1. Power On/Off and Mode Selection
- Press the power button to turn the vacuum cleaner on. It will start in Eco mode.
- Press the mode selection button to switch between Eco mode and Powerful mode.
- Press the power button again to turn the vacuum cleaner off.
6.2. Using Different Attachments
- Brushless Motor Head (Floor Head): Ideal for cleaning hard floors, tiles, tatami mats, and carpets. Its maneuverable design allows for easy cleaning under furniture and in tight corners.
- 2-in-1 Crevice Nozzle: Use for narrow gaps, corners, keyboards, car interiors, and other hard-to-reach areas.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Vactidy V7 vacuum cleaner.
7.1. Emptying the Dust Cup
The Vactidy V7 features a one-touch dust disposal system for hygienic emptying.
- Hold the main unit over a trash bin.
- Press the dust cup release button to open the bottom flap and empty the contents.
7.2. Cleaning Filters and Dust Cup
The dust cup, filters, and brush are washable for easy maintenance.
- Twist and pull to remove the dust cup from the main unit.
- Remove the HEPA filter and metal filter from the dust cup.
- Rinse the dust cup, HEPA filter, and metal filter under running water. Ensure all dust and debris are removed.
- Allow all parts to air dry completely for at least 24 hours before reassembling. Do not use the vacuum with wet filters.
7.3. Cleaning the Brush Head
The brushless design of the V7's floor head minimizes hair tangling, making it easier to clean.
- Detach the floor head from the extension pipe.
- Inspect the brush roll for any tangled hair or debris.
- If necessary, use scissors or a cleaning tool to cut and remove any tangled hair.
- Wipe the brush head with a dry cloth.
8. Troubleshooting
If you encounter any issues with your Vactidy V7, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Battery is not charged Power button not pressed correctly | Charge the battery fully Ensure the power button is pressed firmly |
| Low suction power | Dust cup is full Filters are clogged Nozzle/pipe is blocked | Empty the dust cup Clean or replace the filters Check and clear any blockages in the nozzle or pipe |
| Short operating time | Battery not fully charged Using Powerful mode continuously | Ensure battery is fully charged Use Eco mode for longer runtime, switch to Powerful mode only when needed |
| Unusual noise | Blockage in brush head or pipe Loose parts | Check and clear any blockages Ensure all parts are securely assembled |
If the problem persists after trying these solutions, please contact Vactidy customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model | V7 |
| Suction Power | Up to 26000 Pa |
| Motor Type | Brushless HyperMotor |
| Weight (Main Unit) | 0.73 kg |
| Weight (Total) | 1.0 kg |
| Battery Capacity | 4*2200mAh Lithium-ion |
| Charging Time | Approx. 4-5 hours |
| Operating Time (Eco Mode) | Up to 35 minutes |
| Operating Time (Powerful Mode) | Up to 15 minutes |
| Filtration System | Multi-layer HEPA filter (captures 99.97% of 0.3µm particles) |
| Dust Cup Capacity | 400 ml |
| Noise Level | 78 dB (approx.) |
10. Warranty and Support
Vactidy provides a comprehensive warranty and customer support for your V7 Cordless Vacuum Cleaner.
- Manufacturer's Warranty: Your Vactidy V7 comes with a maximum 24-month manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
- 30-Day Money-Back Guarantee: If you are not satisfied with your purchase for any reason, you may be eligible for a 30-day money-back guarantee.
- Customer Support: For any questions, technical assistance, or warranty claims, please contact Vactidy customer service. Our professional support team is available to assist you.
For contact information, please refer to the official Vactidy website or the contact details provided in your product packaging.