Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your VanAcc King Size Platform Bed Frame, Model BHH006-GK. This bed frame features a wavy velvet wingback upholstered design with a handmade deep button tufted 52.9-inch high headboard and footboard. It is designed to be used without a box spring.
The frame is constructed with solid wood slats and a metal frame for robust support, enveloped in soft Dutch velvet material for comfort and aesthetic appeal. The skin-friendly Dutch fleece fabric and built-in resilience foam sponge ensure a comfortable experience.
Safety Information
- Always check that all parts are intact and undamaged before beginning assembly and before each use.
- Do not exceed the maximum weight recommendation of 1000 lbs (453 kg) for the King size bed frame.
- Ensure all bolts and screws are securely tightened during assembly and periodically check them for tightness.
- Keep small parts away from children during assembly to prevent choking hazards.
- Assemble the bed frame on a soft, clean surface to prevent scratching the product or your floor.
Package Contents
Please verify that all the following components are present in your package:
- Headboard
- Footboard
- Side Rails (Left and Right)
- Support Legs
- Wooden Slats
- Center Support Beam
- Hardware Pack (bolts, washers, nuts, Allen wrench)
If any parts are missing or damaged, please contact customer support immediately.
Setup and Assembly
Assembly is required for this bed frame. It is recommended that two adults perform the assembly, which typically takes approximately 1 hour.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent damage. Refer to the parts list to ensure all components are present.
- Attach Legs to Headboard and Footboard: Securely fasten the support legs to the headboard and footboard using the provided hardware. Ensure they are tightened firmly.
- Connect Side Rails: Attach the side rails to the headboard and footboard. Make sure the connections are stable and all bolts are tightened.
- Install Center Support Beam: Place the center support beam into its designated position and secure it to the headboard and footboard or side rails as per the diagram.
- Place Wooden Slats: The wooden slats are designed for easy installation. They are often attached with Velcro strips to the bed frame, ensuring they stay in place and prevent noise. Lay the slats across the frame, ensuring even spacing and secure attachment.
Image: Velcro strips on the bed frame for easy slat attachment during assembly.
Image: EVA non-slip strips are integrated into the slat design to prevent movement and reduce noise.
Image: Thickened hardwood slats provide firm support, eliminating the need for a box spring.
Operating and Usage Guidelines
This platform bed frame is designed for direct mattress placement, eliminating the need for a box spring. The robust construction with 12 wooden slats, a metal frame, and EVA grip strips ensures stability and quiet use.
- Mattress Compatibility: The recommended mattress thickness for this bed frame is between 8 to 15 inches.
- Weight Capacity: The bed frame has a maximum weight capacity of 1000 lbs. Do not exceed this limit to ensure safety and product longevity.
- Under-bed Clearance: The bed frame provides approximately 4.3 inches of clearance from the ground, which is suitable for most robot vacuum cleaners for easy cleaning underneath.
Image: Recommended mattress thickness for optimal fit and comfort.
Image: The 4.3-inch under-bed clearance allows for easy cleaning with robot vacuums.
Maintenance
- Initial Inspection: Upon receiving the package, please check if all parts are intact and undamaged.
- Regular Cleaning: For the Dutch velvet upholstery, gently vacuum with an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain. For tougher stains, consult a professional upholstery cleaner.
- Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain the bed frame's stability and prevent squeaking.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals on the velvet fabric or metal components, as this can cause damage or discoloration.
- Sunlight Exposure: Prolonged exposure to direct sunlight can cause the velvet fabric to fade. Position your bed away from direct sunlight or use curtains to protect it.
Troubleshooting
- Squeaking Noises: If the bed frame makes squeaking noises, check all connection points. Loosen and re-tighten all bolts and screws. Ensure the wooden slats are properly seated and the EVA strips are intact.
- Instability/Wobbling: If the bed frame feels unstable, verify that all legs are firmly attached and making full contact with the floor. Ensure all hardware is securely tightened. Check for any uneven flooring.
- Missing Parts: If you find any parts missing upon unboxing, refer to the 'Package Contents' section and contact customer support with the specific part number or description.
- Damaged Fabric: For minor scuffs or marks on the velvet, gently brush the nap of the fabric in one direction. For significant damage, contact customer support.
Specifications
| Brand | VanAcc |
| Model Number | BHH006-GK |
| Size | King |
| Product Dimensions (L x W x H) | 86.2" x 79.3" x 52.9" |
| Color | Grey |
| Material | Metal, Dutch Velvet, Wood |
| Finish Type | Dutch Velvet |
| Furniture Finish | Velvet Upholstered |
| Headboard Height | 52.9" |
| Ground to Item Distance (Clearance) | 4.3" |
| Item Weight | 112.4 lbs |
| Weight Capacity | 1000 lbs |
| Recommended Mattress Thickness | 8" - 15" |
| Assembly Required | Yes |
| Box Spring Needed | No |
Image: Detailed dimensions of the King Size Platform Bed Frame.
Warranty Information
VanAcc products are manufactured with quality and care. For specific warranty details regarding your King Size Platform Bed Frame, please refer to the warranty card included in your package or visit the official VanAcc website. Please retain your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or encounter any issues with your VanAcc King Size Platform Bed Frame, please do not hesitate to contact our customer service team. We aim to respond to all inquiries within 12 hours.
For support, please refer to the contact information provided in your product packaging or visit the VanAcc brand store on Amazon.
