1. Introduction
This manual provides essential instructions for the safe and effective use of your Nedis CCAM100BK 3-in-1 Full HD Cycling Camera. This device integrates a 1080p camera, a 600lm LED headlight, and a 100dB horn, designed to enhance your cycling experience. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Nedis CCAM100BK 3-in-1 Full HD Cycling Camera overview with key features.
2. Safety Information
- Ensure the device is securely mounted to your bicycle handlebar before each ride.
- Do not operate the device in extreme temperatures or conditions beyond its specified operating range.
- Keep the camera lens and headlight clean for optimal performance.
- Avoid direct exposure of the headlight beam to eyes.
- Do not attempt to disassemble or modify the device. This will void the warranty.
- Use only the provided USB cable for charging.
- Dispose of the device and its battery responsibly according to local regulations.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- Nedis CCAM100BK Cycling Camera
- Handlebar Mount Bracket
- Rubber Straps for Mounting
- Remote Control Buttons
- USB Charging Cable
- User Manual (this document)
4. Product Overview
Familiarize yourself with the components of your cycling camera.
Figure 2: Various views of the Nedis CCAM100BK device.
- Camera Lens: Captures video and photos.
- LED Headlight: Provides illumination with multiple modes.
- Power Button: Turns the device on/off.
- Mode Button: Switches between camera modes (photo/video).
- Record/Shutter Button: Starts/stops recording or takes a photo.
- Horn Button: Activates the bicycle horn.
- USB-C Port: For charging and data transfer.
- MicroSD Card Slot: For storage of recordings (up to 32GB).
- Mounting Point: For attaching to the handlebar bracket.
5. Setup
5.1 Installing the MicroSD Card
- Ensure the device is powered off.
- Locate the microSD card slot, usually protected by a rubber flap.
- Gently insert a microSD card (Class 10 or higher, up to 32GB) into the slot until it clicks into place.
- Close the rubber flap to maintain water resistance.
5.2 Mounting the Camera
The camera is designed for easy attachment to various bicycle handlebars.
- Attach the handlebar mount bracket to your bicycle handlebar using the provided rubber straps. Ensure it is securely fastened and does not obstruct your view or controls.
- Slide the Nedis CCAM100BK camera onto the mount until it locks into place.
- Adjust the camera angle to ensure a clear view of the road ahead.
Figure 3: Mounting the camera and remote control on a handlebar.
5.3 Attaching the Remote Control
The remote control allows for convenient operation of the camera and horn.
- Secure the remote control buttons to a convenient location on your handlebar using the provided straps.
- Ensure the remote cable is routed safely and does not interfere with steering or braking.
6. Operating Instructions
6.1 Power On/Off
- To power on, press and hold the Power Button until the indicator lights illuminate.
- To power off, press and hold the Power Button again until the indicator lights turn off.
6.2 Camera Operation (Photo & Video)
The camera supports both photo and video recording at 1080p resolution.
Figure 4: Camera capabilities.
- Switching Modes: Press the Mode Button to toggle between photo and video recording modes. An indicator light will show the current mode.
- Recording Video: In video mode, press the Record/Shutter Button once to start recording. Press it again to stop recording.
- Taking Photos: In photo mode, press the Record/Shutter Button once to capture a still image.
6.3 Headlight Operation
The 600lm LED headlight offers three distinct lighting modes for varying conditions.
Figure 5: Headlight modes in use.
- Press the Headlight Button (often integrated with the Power Button or a dedicated button) to cycle through the modes:
- Strong Light
- Soft Light
- SOS (Emergency Flashing)
- Press again to turn the headlight off.
6.4 Horn Operation
The 100dB horn provides an audible warning for increased safety.
Figure 6: Bike horn in action.
- Press the Horn Button on the remote control to activate the horn.
- The device features 5 different horn sounds. Repeatedly pressing the button may cycle through these sounds or activate a specific one depending on the model's design.
7. Charging and Data Transfer
7.1 Charging the Battery
The device is equipped with a 2500mAh built-in battery.
Figure 7: Charging the device via USB-C.
- Open the rubber flap covering the USB-C port.
- Connect the provided USB-C cable to the device and the other end to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will show the charging status. It typically turns solid when fully charged.
- Ensure the rubber flap is securely closed after charging to maintain water resistance.
7.2 Transferring Data
- Connect the device to a computer using the USB-C cable.
- The device should appear as a removable disk drive on your computer.
- You can then access the recorded videos and photos on the microSD card and transfer them to your computer.
- Alternatively, you can remove the microSD card and insert it into a card reader connected to your computer.
8. Maintenance
8.1 Cleaning
- Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the camera lens and headlight are free from dirt and smudges for clear recordings and optimal light output.
- Keep the USB-C port and microSD slot free from dust and debris.
8.2 Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted. | Charge the device using the provided USB-C cable. |
| Cannot record video/take photos. | No microSD card inserted or card is full/corrupted. | Insert a compatible microSD card (up to 32GB). Format the card if necessary (refer to device settings, if available, or format on a computer). Delete old files to free up space. |
| Poor video/photo quality. | Dirty lens; insufficient lighting; low resolution setting (if adjustable). | Clean the camera lens. Ensure adequate lighting. Verify camera settings for resolution (if applicable). Note that the camera is 2MP and records at 1080p, which may not provide extreme detail for license plates at a distance. |
| Recorded files are unreadable or partially viewable. | Incompatible video format; corrupted files; issue with playback software. | Try playing files with different media players on your computer. Ensure your computer's video codecs are up to date. Reformat the microSD card in the device or on a computer. |
| Battery drains quickly. | Continuous use of headlight/recording; battery degradation; device not fully powering off. | Ensure the device is fully charged before use. Minimize continuous use of high-power features if extended battery life is needed. Confirm the device is completely powered off when not in use. |
| Headlight not working. | Battery depleted; LED malfunction. | Charge the device. If the issue persists, contact customer support. |
| Horn not sounding. | Remote control not connected; battery depleted; horn malfunction. | Ensure the remote control is properly connected. Charge the device. If the issue persists, contact customer support. |
10. Specifications
| Brand | Nedis |
| Model Number | CCAM100BK |
| Color | Black |
| Effective Still Resolution | 2 Megapixels |
| Video Recording Resolution | 1080p |
| Field of View | 70 Degrees |
| Special Features | Headlight, Horn |
| Headlight Brightness | 600 lm (3 modes: Strong, Soft, SOS) |
| Horn Loudness | 100 dB (5 types of sounds) |
| Connectivity Technology | USB (USB-C) |
| Battery Composition | Lithium-ion |
| Battery Capacity | 2500 mAh |
| Max Recording Time | Up to 10 hours (Note: Actual duration may vary based on usage of light/horn and recording settings.) |
| Storage Support | MicroSD card up to 32GB |
| Waterproof Housing | Yes (Resistant to various weather conditions) |
11. Warranty and Support
11.1 Warranty Information
Nedis products are manufactured to high quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Nedis website. Keep your proof of purchase for any warranty claims.
11.2 Customer Support
Should you encounter any issues or have questions regarding your Nedis CCAM100BK Cycling Camera that are not covered in this manual, please contact Nedis customer support. Contact information can typically be found on the official Nedis website or on the product packaging.
