Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The BESTTEN 3-Way Decorator Wall Light Switch is designed for both residential and commercial applications. It features a modern rocker paddle design and can be used in single-pole or three-way circuits, allowing control of lights from one or two locations.
Key Features:
- 3-Way Functionality: Controls lights from two locations, or can be used as a single-pole switch.
- Easy Installation: Offers quick push-in and side wiring options.
- Durable Construction: Crafted from impact-resistant polycarbonate thermoplastic and solid steel.
- Modern Design: Sleek decorator style with a smooth rocker paddle action.
- UL Listed: Certified for safety and quality standards.
Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Improper installation can result in serious injury or death.
- Always turn off power at the circuit breaker or fuse box before wiring.
- Ensure all wiring connections are secure and comply with local electrical codes.
- If you are unsure about any part of these instructions, consult a qualified electrician.
- Do not use this switch with loads exceeding its specified rating (15A, 120V/277V).
- This device is intended for installation in accordance with the National Electrical Code (NEC) and local regulations.
Components Included
- BESTTEN 3-Way Decorator Wall Light Switch(es)
- Mounting Screws
- Decorator Wallplate(s)
Specifications
| Brand | BESTTEN |
| Model | B0F997XHTW |
| Operation Mode | ON-OFF |
| Current Rating | 15 Amps |
| Operating Voltage | 120 Volts / 277 Volts |
| Contact Type | Maintained |
| Connector Type | Screw |
| Terminal | Screw |
| Circuit Type | 3-way |
| Contact Material | Brass |
| Product Dimensions | 4.53 x 2.91 x 1.28 inches |
Figure 1: Dimensions of the BESTTEN 3-Way Decorator Wall Light Switch.
Installation
Tools Required:
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers
- Electrical Tape (optional)
- Voltage Tester (recommended)
Wiring Instructions:
- Turn Off Power: Locate the circuit breaker or fuse that controls the switch you are replacing or the circuit where you are installing the new switch. Turn it OFF. Verify power is off using a voltage tester.
- Remove Old Switch (if applicable): Carefully remove the wallplate and unscrew the old switch from the electrical box. Disconnect the wires, noting their connections.
- Identify Wires:
- Hot/Line Wire (Black Screw): This wire brings power to the switch.
- Load Wire (Black Screw): This wire carries power from the switch to the light fixture.
- Traveler Wires (Brass Screws): For 3-way circuits, these wires connect the two 3-way switches. There will be two traveler wires.
- Ground Wire (Green Screw): This is the safety ground wire, typically bare copper or green insulated.
- Connect Wires to New Switch: The BESTTEN 3-Way switch offers both side wiring (screw terminals) and quick push-in wiring (for 14 AWG solid copper wire only).
- Connect the ground wire to the green screw terminal.
- Connect the hot/line and load wires to the black screw terminals.
- Connect the two traveler wires to the brass screw terminals.
Figure 2: Back View of Switch with Wiring Terminals.
- Secure the Switch: Gently fold the wires into the electrical box. Mount the switch to the electrical box using the provided screws.
- Install Wallplate: Attach the decorator wallplate over the switch.
- Restore Power: Turn the power back ON at the circuit breaker.
- Test: Test the switch to ensure proper operation.
Understanding a 3-Way Circuit:
A 3-way circuit allows a single light fixture or group of fixtures to be controlled from two different switch locations. This is common in stairwells, long hallways, or large rooms with multiple entrances. The BESTTEN 3-Way switch is designed to function in such circuits.
Figure 3: Typical 3-Way Wiring Diagram.
Figure 4: Example of a 3-Way Circuit Application.
Operation
The BESTTEN 3-Way Decorator Wall Light Switch operates with a simple rocker paddle mechanism. Press the top of the paddle to turn the connected lights ON, and press the bottom of the paddle to turn them OFF.
Figure 5: Installed Switch in Use.
Maintenance
Your BESTTEN 3-Way Decorator Wall Light Switch requires minimal maintenance. To clean, ensure power is off at the circuit breaker, then wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
- Light does not turn ON/OFF:
- Check the circuit breaker to ensure power is ON.
- Verify all wire connections are secure and correctly wired according to the diagrams in this manual.
- Ensure the light bulb is functional.
- Switch feels loose:
- Turn off power at the circuit breaker.
- Remove the wallplate and tighten the mounting screws that secure the switch to the electrical box.
Customer Support
For technical assistance, warranty information, or any questions not covered in this manual, please contact BESTTEN customer support. Refer to the product packaging or the official BESTTEN website for contact details.
