Storkcraft 04622-451
Contents
Storkcraft Santos 3-in-1 Convertible Crib User Manual
Model: 04622-451
Brand: Storkcraft
1. Introduction
This manual provides essential information for the safe assembly, operation, maintenance, and conversion of your Storkcraft Santos 3-in-1 Convertible Crib. Please read all instructions carefully before assembly and retain this manual for future reference.
The Storkcraft Santos crib is designed to adapt to your child's growth, converting from a crib to a toddler bed and a daybed. It features a modern design with rounded posts and a natural wood base.
2. Safety Information
- Maximum Weight Recommendation: 50 pounds (22.7 kg).
- Always ensure all parts are securely fastened before use. Periodically check all screws and bolts for tightness.
- Do not use the crib if any parts are missing, damaged, or broken. Contact Storkcraft Customer Care for replacement parts.
- Use only a crib mattress that meets the standard full-size crib mattress dimensions. The mattress should be no thicker than 6 inches (15 cm) and fit snugly without gaps larger than 1/2 inch (1.27 cm) on any side.
- Keep all small parts and plastic bags away from children.
- Certifications: This product is GREENGUARD Gold Certified, meaning it has been screened for over 10,000 chemicals and VOCs. It is also JPMA Certified, meeting or exceeding all applicable safety standards.
3. What's in the Box
The Storkcraft Santos 3-in-1 Convertible Crib package includes:
- All necessary crib parts
- Hardware for assembly
- Detailed assembly instructions
Note: Mattress and toddler safety guardrails are sold separately.
4. Setup and Assembly
Assembly of the Storkcraft Santos crib is required. Please refer to the detailed assembly instructions included in your product packaging for step-by-step guidance. Ensure you have all listed parts and hardware before beginning assembly.
General Assembly Steps:
- Unpack all components and verify against the parts list.
- Assemble the crib frame according to the provided diagrams.
- Attach the mattress support base at the desired height.
- Secure all connections firmly.

Image: Storkcraft Santos 3-in-1 Convertible Crib, fully assembled in crib mode.
5. Operating Instructions and Conversions
5.1 Crib Mode
The crib features an adjustable mattress support base with four height options. The highest position is suitable for newborns, allowing easier access to your baby. As your child grows and becomes more active, lower the mattress support to prevent climbing out.
- Adjusting Mattress Height: Follow the specific instructions in your assembly manual to safely adjust the mattress support base. Ensure all hardware is re-secured after adjustment.
5.2 Toddler Bed Conversion
To convert the crib into a toddler bed, remove the front rail and install one or two toddler safety guardrails (each sold separately). This transition provides a lower sleeping surface with partial side protection.

Image: Storkcraft Santos Crib converted to a toddler bed.
5.3 Daybed Conversion
For daybed conversion, remove the front rail. No guardrails are used in this configuration, providing an open seating or sleeping area suitable for an older child.

Image: Storkcraft Santos Crib converted to a daybed.
6. Maintenance and Care
- Cleaning: Wipe surfaces with a damp cloth. Avoid abrasive cleaners or strong chemicals, as they may damage the finish.
- Inspection: Regularly inspect the crib for loose hardware, damaged parts, or signs of wear. Tighten any loose fasteners immediately.
- Storage: If storing the crib, ensure it is clean and dry. Store in a climate-controlled environment to prevent warping or damage to the wood.
7. Troubleshooting
If you encounter any issues with your Storkcraft Santos crib, please review the assembly instructions to ensure all steps were followed correctly. Common issues and solutions include:
- Wobbly Frame: Check all bolts and screws and tighten them securely. Ensure all parts are correctly aligned.
- Missing Parts: Refer to the parts list in your assembly manual. If parts are missing, contact Storkcraft Customer Care.
- Difficulty with Conversion: Re-read the conversion steps in your manual. Ensure all necessary parts (e.g., guardrails for toddler bed) are available and correctly installed.
For further assistance, please contact Storkcraft Customer Care.
8. Specifications

Image: Storkcraft Santos Crib dimensions.
| Feature | Detail |
|---|---|
| Model Number | 04622-451 |
| Product Dimensions (L x W x H) | 53.66" x 29.41" x 33.66" (136.3 cm x 74.7 cm x 85.5 cm) |
| Item Weight | 49.9 pounds (22.6 kg) |
| Maximum Weight Recommendation | 50 pounds (22.7 kg) |
| Material | Engineered Wood, Pine Wood |
| Color | White With Natural |
| Special Feature | 3-in-1 Convertible |
| Assembly Required | Yes |
| Certifications | GREENGUARD Gold Certified, JPMA Certified |
9. Warranty and Support
The Storkcraft Santos 3-in-1 Convertible Crib is backed by a 1-year limited manufacturer's warranty. This warranty covers manufacturing defects under normal use.
For warranty claims, replacement parts, or any product-related inquiries, please contact Storkcraft Customer Care. Have your model number (04622-451) and proof of purchase ready when contacting support.
Storkcraft Customer Care:
- Refer to the contact information provided in your product packaging or visit the official Storkcraft website for current contact details.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.