1. Introduction
Thank you for choosing the Quntis Monitor Light Bar with Remote. This device is designed to provide optimal illumination for your workspace, reducing eye strain and enhancing visual comfort. It features dual light sources, a patented sliding weighted clip for broad compatibility, and smart remote control for easy adjustments.
2. Safety Information
- Ensure the product is used within its specified voltage (5V).
- Do not disassemble or modify the product.
- Keep away from water and high humidity environments.
- Avoid direct eye exposure to the light source for prolonged periods.
- Use only the provided Type-C cable for power connection.
3. Package Contents
- Quntis Monitor Light Bar
- Wireless Remote Control
- Type-C USB Cable
- User Manual
4. Setup
4.1. Installing the Light Bar
- Mount the light bar into the clip. Ensure it is securely seated.
- Adjust the patented sliding weighted clip to fit your monitor's thickness.
- For extra thin monitors: Slide the clip to its minimum width.
- For thick monitors: Slide the clip to its maximum width.
- For curved monitors: Pull apart the front of the clip to accommodate the curvature.
- Place the light bar assembly on top of your monitor, ensuring the weighted clip rests securely against the back of the monitor.
- Connect the Type-C USB cable to the light bar and a suitable 5V 1.5A (7.5W) power source (e.g., computer USB port, USB wall adapter).
4.2. Remote Control Setup
The remote control typically comes pre-paired. Insert 3 AA batteries (not included) into the remote control. The main power button on the remote emits a faint glow, indicating it is in standby mode.
Remote Control Usage Tips: The remote control enters standby sleep mode to save power when not in use. To operate the remote control, simply press any button on the control interface to activate it. Once the button's orange light is on, press the desired button again to adjust the light bar.
Video 1: How to Properly Use Monitor Light Bar ScreenLinear Glow Plus. This video demonstrates the installation process of the Quntis Monitor Light Bar and the basic functions of its remote control, including turning it on/off and adjusting settings.
5. Operating Instructions
5.1. Power On/Off
Press the Main Power On/Off button on the remote control to turn the light bar on or off.
5.2. Adjusting Brightness
To adjust brightness: Long-press the Decrease Button (-) or Increase Button (+) for stepless dimming. Alternatively, quick-tap the Brightness Mode button to cycle through 4 preset levels (25%, 50%, 75%, 100%).
5.3. Adjusting Color Temperature
To adjust color temperature: Long-press the Decrease Button (-) or Increase Button (+) for stepless adjustment. Alternatively, quick-tap the Color Temperature Mode button to cycle through preset color temperatures (e.g., 3000K, 4000K, 5000K, 6500K).
5.4. Switching Lighting Modes
The light bar offers three eye-comfort lighting modes:
- Front Lighting Mode: For focused illumination on your desk area, enhancing focus during work.
- Backlighting Mode: To create a cozy ambient light for relaxation.
- Front & Back Lighting Mode: For balanced uniform illumination, improving overall eye comfort.
Use the Back Light Brightness On/Off button on the remote to toggle the backlight.
6. Key Features
- Ultra Bright & Wider Illumination: Extended lamp bar length (20.1 inches) and backlighting area (6.29 inches) for comprehensive lighting.
- Eye Caring No Glare: Unique asymmetrical optical design directs light onto the desk, not the screen, preventing glare and reflections.
- High Ra95 CRI: Enhances vibrant and true-to-life colors, crucial for professionals in color-sensitive work, minimizing eye fatigue.
- Flicker-Free Lighting: Equipped with 88 high-quality LED beads for front lighting and 55 for backlighting, ensuring stable light without visible flicker or blue light hazards.
- Webcam Friendly Design: The L-Type C cable does not obstruct overhead space, allowing for easy camera placement.
7. Maintenance
- Clean the light bar and remote control with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Ensure the device is unplugged before cleaning.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light bar does not turn on. | No power or loose connection. | Check USB cable connection. Ensure power source is active. |
| Remote control is unresponsive. | Batteries are low or not inserted correctly. Remote is in sleep mode. | Replace AA batteries. Press any button to wake the remote from sleep mode. |
| Light bar flickers. | Unstable power supply. | Connect to a stable power source (e.g., a wall adapter with sufficient wattage). |
| Light bar does not fit monitor. | Clip not adjusted correctly. | Adjust the sliding weighted clip according to your monitor type (thin, thick, curved). |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | LI-HY-0212-GY |
| Product Dimensions | 20.08"D x 0.78"W x 0.78"H |
| Item Weight | 930 Grams (2.05 pounds) |
| Material | Aluminum |
| Finish Type | Metallic |
| Light Source Type | LED |
| Number of Light Sources | 143 (88 front, 55 backlight) |
| Power Source | Corded Electric (USB-C) |
| Voltage | 5V |
| Control Method | Remote |
| Special Feature | Cordless Remote |
| Recommended Uses | Reading, Study, Working |
| Indoor/Outdoor Usage | Indoor |
10. Warranty and Support
Quntis is dedicated to providing excellent products and customer service. If you have any questions about your Monitor Light Bar, please refer to the following support information:
- Warranty: 1-Year limited warranty (no fix, change only).
- Response Time: Customer support typically responds within 24 hours.
- Returns/Exchanges: Free return & exchange within 30 days.
- Contact: For assistance, please raise a Q&A or contact Quntis directly through their official channels.
