Eyebrow & Facial Trimmer: 2-in-1 Rechargeable Facial Hair & Eyebrow Shaver

1. Introduction

Thank you for choosing the VG VOGCREST 2-in-1 Rechargeable Eyebrow & Facial Trimmer. This device is designed for gentle and painless removal of unwanted hair on the eyebrows, upper and lower lip, cheeks, chin, and neck. Its compact design, built-in LED light, and USB charging capability make it a convenient tool for daily grooming.

Please read this manual thoroughly before using the product to ensure safe and effective operation. Keep this manual for future reference.

2. Safety Instructions

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not immerse the device in water or other liquids.
• Keep the device away from direct sunlight and high temperatures.
• Do not use the device on irritated, inflamed, or broken skin. Consult a doctor if you have any skin conditions.
• Ensure the device is fully charged before first use to optimize battery life.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Keep out of reach of children.

3. Product Components

The VG VOGCREST 2-in-1 Trimmer includes the following components:

• Main Trimmer Unit (with Eyebrow Trimmer Head attached)
• Facial Hair Remover Head (interchangeable)
• USB Charging Cable (Type-C)
• Cleaning Brush
• Instruction Manual

Figure 3.1: Main product unit, interchangeable heads, and USB charging cable.

Figure 3.2: Key features including the 2-in-1 design, integrated LED light, and USB Type-C charging port.

4. Setup

4.1 Charging the Device

1. Connect the provided USB Type-C charging cable to the charging port at the bottom of the trimmer.
2. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, wall adapter, power bank).
3. The LED indicator light will illuminate during charging. Once fully charged, the light may change color or turn off, depending on the model.
4. A full charge typically takes approximately 1.5 hours and provides about 45 minutes of working time.

4.2 Attaching/Changing Trimmer Heads

1. To remove a trimmer head, gently twist it counter-clockwise and pull it upwards.
2. To attach a new trimmer head, align the grooves on the head with the slots on the main unit, then push down and twist clockwise until it clicks into place.

5. Operating Instructions

5.1 General Operation

1. Ensure your skin is clean and dry before use. Avoid using creams, lotions, or makeup before trimming.
2. Slide the power switch located on the side of the device upwards to turn it on. The built-in LED light will illuminate to help you see fine hairs.
3. Gently press the trimmer head against your skin.
4. Move the device in small, circular motions or against the direction of hair growth for effective removal.
5. After use, slide the power switch downwards to turn off the device.

5.2 Using the Eyebrow Trimmer Head

The precision eyebrow trimmer head is ideal for shaping and maintaining eyebrows.

• Use the eyebrow trimmer head to carefully remove stray hairs around and between your eyebrows.
• For precise shaping, pull the skin taut and move the trimmer slowly in small, controlled strokes.

Figure 5.1: Demonstrating the use of the eyebrow trimmer for fine-point precision.

5.3 Using the Facial Hair Remover Head

The facial hair remover head is designed for larger areas like the upper lip, cheeks, chin, and peach fuzz.

• Attach the facial hair remover head.
• Gently glide the device over the desired area in slow, circular motions.
• The device is designed to remove hair painlessly without causing nicks, cuts, or irritation.

Figure 5.2: Illustrating the use of the facial hair remover for areas like the forehead, around the lip, cheek, and chin.

Note: No official product videos were available in the provided data to embed.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene of your trimmer.

1. Ensure the device is turned off before cleaning.
2. Remove the trimmer head by twisting it counter-clockwise and pulling it off.
3. Use the provided small cleaning brush to brush away any accumulated hair from the trimmer head and the main unit.
4. The trimmer heads are washable. You can rinse them under running water. Ensure they are completely dry before reattaching to the main unit. Do not rinse the main unit under water.
5. Wipe the main body of the device with a soft, dry cloth.
6. Store the device in a cool, dry place when not in use.

7. Troubleshooting

If you encounter issues with your trimmer, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Check if the power switch is fully in the 'ON' position.
• Poor trimming performance: The trimmer head might be clogged with hair. Clean the head thoroughly using the cleaning brush. Ensure the head is properly attached. The battery might be low; recharge the device.
• Skin irritation: Ensure your skin is clean and dry before use. Do not press the trimmer too hard against the skin. Move the device gently in circular motions. If irritation persists, discontinue use.
• LED light not working: This may indicate a low battery or a malfunction. Try recharging the device. If the issue persists after charging, contact customer support.

If the problem persists after trying these solutions, please contact VG VOGCREST customer support.

8. Specifications

9. Warranty and Support

VG VOGCREST is confident in the quality of this electric hair remover and offers a hassle-free 60-day return policy and a lifetime guarantee for any product defects.

For any issues, questions, or support needs, please feel free to contact VG VOGCREST customer service. Refer to your purchase documentation for specific contact details or visit the official VG VOGCREST store page on Amazon.