Transformers Studio Series Voyager 113 Skywarp Action Figure Instruction Manual

Introduction

This document provides comprehensive instructions for the assembly, operation, and care of your Transformers Studio Series Voyager 113 Skywarp action figure. This collectible figure, inspired by the Transformers: Bumblebee movie, converts between robot and Cybertronian jet modes. It is designed for users aged 8 years and older.

Safety Information

WARNING: CHOKING HAZARD – Small parts may be generated. Not for children under 3 years.

Always ensure small parts are kept away from young children to prevent choking. Adult supervision is recommended during play, especially during transformation.

Package Contents

• 1x Skywarp Action Figure
• 2x Null Ray Accessories
• 1x Arm Cannon Accessory
• 1x Removable Cybertron Falls Backdrop Scene

Image: The Skywarp action figure in robot mode, displayed alongside its retail packaging.

Setup

1. Unboxing: Carefully remove the Skywarp figure and all accessories from the packaging.
2. Accessory Attachment: The Null Rays and arm cannon accessories can be attached to the figure in both robot and jet modes. Refer to the transformation steps for specific attachment points.
3. Removable Backdrop: The included Cybertron Falls backdrop can be used to display your figure. Position the figure in front of the backdrop for an immersive scene.

Operating Instructions: Transformation

The Skywarp figure features a 29-step conversion process between its robot and Cybertronian jet modes. Follow these general guidelines for transformation:

Robot Mode

Image: The Skywarp action figure in its robot form, showcasing its articulated design and weapon.

Cybertronian Jet Mode

Image: The Skywarp action figure transformed into its Cybertronian jet mode.

Transformation Steps Overview

The transformation involves manipulating various panels, joints, and hinges to reconfigure the figure. Always apply gentle, even pressure. Avoid forcing parts, as this may cause damage. The back of the product packaging provides a visual guide to the transformation sequence.

Image: The reverse side of the product packaging, illustrating key steps for transforming the figure.

Official Transformation Guide Video

Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the figure. Avoid using harsh chemicals or abrasive materials, as these can damage the paint or plastic.
• Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
• Joint Care: If joints become stiff, gently work them back and forth. Do not apply excessive force.

Troubleshooting

• Difficulty Transforming: If you encounter difficulty during transformation, re-examine the instructions or the visual guide on the packaging. Ensure all previous steps are correctly completed before proceeding.
• Loose Parts: If any parts feel loose, check if they are fully tabbed or pegged into their designated slots.
• Missing Accessories: Verify all package contents upon opening. If an accessory is missing, refer to the warranty and support section.

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Hasbro customer service directly. Contact details can typically be found on the product packaging or on the official Hasbro website.

Manufacturer: Hasbro