1. Introduction
Thank you for choosing the Hurom H70 Cold Press Juicer Machine. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new juicer. Please read it thoroughly before first use and retain it for future reference.
The Hurom H70 Cold Press Juicer Machine, featuring its sleek black design and compact form factor.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before operating the juicer.
- Do not immerse the motor base in water or other liquids.
- Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always ensure the juicer is properly assembled before operation.
- Do not put fingers or other objects into the juicer opening while it is operating. If food becomes lodged, use the food pusher provided.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Components
Familiarize yourself with the various parts of your Hurom H70 juicer for proper assembly and operation.
Key components of the Hurom H70 Juicer: Self-Feeding Hopper, Easy Clean Chamber, Pulp Outlet, Juice Spout, On/Off Switch, Removable Power Cord, and BPA-Free, Impact-Resistant ABS Plastic housing.
- Self-Feeding Hopper: Large opening for adding ingredients.
- Easy Clean Chamber: The main juicing assembly, designed for simplified cleaning.
- Pulp Outlet: Where extracted pulp is discharged.
- Juice Spout: Where the fresh juice is dispensed.
- On/Off Switch: Controls the power to the unit.
- Removable Power Cord: For easy storage and connection.
- Motor Base: Contains the motor and controls.
4. Setup and Assembly
The Hurom H70 features an intuitive design with fewer parts, making assembly straightforward.
- Place the motor base on a stable, flat surface.
- Align the Easy Clean Chamber with the motor base and gently twist until it locks into place.
- Insert the auger assembly into the chamber.
- Place the self-feeding hopper on top of the chamber, ensuring it is securely seated.
- Connect the power cord to the juicer and then to a suitable electrical outlet.
Ensure all parts are correctly assembled before plugging in the appliance.
5. Operating Instructions
The Hurom H70 is designed for efficient cold pressing with minimal preparation.
Utilize the large self-feeding hopper to add various fruits and vegetables, minimizing the need for pre-chopping.
- Preparation: Wash all fruits and vegetables thoroughly. For most produce, minimal chopping is required due to the large self-feeding hopper. Remove large seeds, pits, and hard skins (e.g., pineapple skin, citrus peels).
- Start Juicing: Place a juice collection container under the juice spout and a pulp container under the pulp outlet. Turn the juicer ON using the On/Off switch.
- Add Ingredients: Slowly feed ingredients into the self-feeding hopper. The juicer will automatically process them. Avoid overfilling the hopper or forcing ingredients.
- Continuous Juicing: The wide inlet allows you to add more ingredients even while juicing, reducing interruptions.
- Monitor Juice Level: The front-facing gauge window allows you to monitor the juice level in the chamber.
- Finish Juicing: Once all ingredients are processed, allow the juicer to run for a few more seconds to extract any remaining juice and pulp. Turn the juicer OFF.
The slow squeeze technology ensures maximum juice yield and preserves nutrients, resulting in vibrant, full-flavored juice with minimal waste.
6. Cleaning and Maintenance
The H70 features a revolutionary strainer-free design for easy cleaning.
The strainer-free design allows for quick rinsing of components under running water, eliminating the need for scrubbing mesh filters.
- Disassembly: Unplug the juicer from the power outlet. Disassemble the hopper, chamber, and auger system.
- Rinsing: Rinse all detachable parts under running water immediately after use. The two-part auger system naturally filters pulp, eliminating mesh screens and making rinsing quick and easy.
- Washing: For a more thorough clean, wash parts with warm, soapy water and a soft brush if necessary.
- Drying: Dry all parts thoroughly before reassembling or storing.
- Motor Base: Wipe the motor base with a damp cloth. Do not immerse the motor base in water.
Important: The Hurom H70 is not dishwasher safe. Hand washing is required for all detachable components.
7. Troubleshooting
If you encounter issues with your Hurom H70 juicer, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Juicer does not turn on. | Not plugged in; parts not assembled correctly. | Ensure power cord is securely plugged into outlet and juicer. Check that all juicing chamber components are correctly aligned and locked. |
| Juicer stops during operation. | Overload; ingredients too large or hard. | Turn off and unplug. Disassemble and clear any blockages. Cut harder ingredients into smaller pieces. Wait a few minutes before restarting. |
| Low juice yield or wet pulp. | Ingredients fed too quickly; improper assembly. | Feed ingredients slowly. Ensure all parts are correctly assembled and the auger is properly seated. |
| Excessive vibration or noise. | Improper assembly; foreign object. | Check that all components are securely assembled. Disassemble and check for any foreign objects. |
8. Product Specifications
- Brand: Hurom
- Model Number: H70FT-BBC06MB
- Color: Black
- Special Feature: Portable
- Product Dimensions: 8"D x 8"W x 16"H
- Finish Type: Painted
- Power Source: Corded Electric
- Blade Material: Stainless Steel
- Voltage: 120 Volts
- Dishwasher Safe: No
- Item Weight: 14.8 pounds
- UPC: 888253001131
9. Warranty Information
Hurom products are manufactured with high-quality materials and craftsmanship. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Hurom website. Keep your proof of purchase for warranty claims.
10. Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Hurom customer service. You can find contact information on the official Hurom website or through your retailer.
Website: www.hurom.com
