Shark CS851SMBR

Shark EvoPower System IQ Cordless Vacuum CS851SMBR User Manual

Model: CS851SMBR

Important Safety Instructions

When using an electrical appliance, basic precautions should always be observed, including the following:

What's in the Box

The Shark EvoPower System IQ Cordless Vacuum (Model CS851SMBR) includes the following components:

Note: Some models may include additional accessories such as a Charging Auto Empty Dock, Baby Dock for Accessories, Motorized Hand Tool, Pet Multi Tool, or Wide Upholstery Tool. Please refer to your specific product packaging for exact contents.

Shark EvoPower System IQ components laid out

Image: All components of the Shark EvoPower System IQ vacuum, including the main unit, charging dock, and various cleaning tools.

Assembly

The Shark EvoPower System IQ is designed for easy assembly. Follow these steps to set up your vacuum:

  1. Connect the Wand: Insert the wand into the main handheld vacuum unit until it clicks securely into place.
  2. Attach the Floor Nozzle: Connect the desired floor nozzle (e.g., HybridClean floorhead) to the bottom of the wand, ensuring it clicks firmly.
  3. Insert Battery: Slide the lithium-ion battery into the battery slot on the main unit until it locks.
Assembled Shark EvoPower System IQ Cordless Vacuum

Image: Fully assembled Shark EvoPower System IQ cordless vacuum in its upright position.

Charging the Battery

Before first use, fully charge the battery. A full charge typically takes approximately 4 hours.

  1. Connect Charger: Plug the charging adapter into a wall outlet.
  2. Place on Dock: Place the vacuum onto the charging dock. Ensure the charging contacts align. The battery indicator lights will illuminate to show charging status.
  3. Direct Charging: Alternatively, the battery can be removed and charged directly using the charging adapter.

Operating Modes and Smart iQ PRO Technology

The Shark EvoPower System IQ features intelligent suction technology to optimize cleaning performance across various surfaces.

Available Modes:

Smart iQ Dirt Detect indicator on Shark vacuum

Image: Illustration of the Smart iQ Indicator, showing how the vacuum detects dirt levels (Low, Moderate, High) and adjusts suction power accordingly, with corresponding handheld and floorhead readouts.

Cleaning Attachments

The Shark EvoPower System IQ comes with versatile attachments to tackle various cleaning needs:

HybridClean Anti-Hair Wrap technology on Shark vacuum

Image: Close-up of the HybridClean floorhead demonstrating its anti-hair wrap technology, showing how it prevents hair tangles compared to other brushrolls.

Dual LED lights on Shark vacuum floorhead

Image: The vacuum's floorhead with Dual LED Lights illuminating a dark area, highlighting its ability to reveal hidden dirt.

Maintenance

Regular maintenance ensures optimal performance of your Shark EvoPower System IQ vacuum.

Emptying the Dust Cup:

Empty the dust cup after each use or when debris reaches the MAX fill line. To empty, hold the dust cup over a trash bin and press the release latch.

Cleaning Filters:

Rinse the pre-motor filters (foam and felt) with cold water at least once a month. Tap loose dirt off filters between washes as needed. Allow filters to air-dry completely for at least 24 hours before reinstalling. Do not operate the vacuum without filters in place.

Cleaning Brushrolls:

Periodically check the brushroll for any hair, string, or debris that may be wrapped around it. Use scissors to carefully cut away any tangled material. The HybridClean brushroll is designed to minimize hair wrap, but occasional inspection is recommended.

Troubleshooting

If your Shark EvoPower System IQ is not performing as expected, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Vacuum not turning on.Battery not charged or not properly inserted.Ensure battery is fully charged and securely clicked into place.
Low suction power.Dust cup full, filters clogged, or blockage in nozzle/hose.Empty dust cup. Clean filters. Check for and remove any blockages.
Brushroll not spinning.Obstruction in brushroll or incorrect floor setting.Remove any debris from brushroll. Ensure correct floor setting is selected.
Battery life is short.Using Boost mode frequently or battery degradation.Use ECO mode for longer run-time. If battery life significantly decreases, consider battery replacement.

Specifications

FeatureDetail
BrandShark
ModelCS851SMBR
Item Weight2 Kilograms
Form FactorStick
Power SourceCorded Electric (for charging)
Voltage225 Volts
Is it Cordless?Yes
Batteries RequiredYes
Filter TypeCartridge
Surface RecommendationCarpet, Hard Floor
Special FeaturesCordless, Auto Dirt Detect, Strong Suction Power, Ultralight at 2kg
Bin Capacity0.14 Liters
Shark EvoPower System IQ vacuum being used by a person

Image: A person using the ultralight Shark EvoPower System IQ vacuum in a modern kitchen setting, demonstrating its ease of maneuverability.

Warranty and Support

For warranty information, product registration, or technical support, please refer to the official Shark website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Visit the official SharkClean website for more details and to access additional resources.

Related Documents - CS851SMBR

Preview Shark PowerDetect Quick Start Guide
Quick start guide for the Shark PowerDetect vacuum cleaner, detailing its settings, DuoClean Detect modes (Floor Detect, Dirt Detect, Edge Detect, Direction Detect), and sensor cleaning instructions.
Preview Shark Cordless Detect Auto-Empty System IW4000 Series: Quick Start Guide & Safety Instructions
Comprehensive guide for the Shark Cordless Detect Auto-Empty System IW4000 Series, covering safety instructions, assembly, maintenance, and manufacturer's guarantee. Learn how to set up and care for your Shark vacuum.
Preview Shark Detect Pro Akku-Staubsauger Bedienungsanleitung
Umfassende Bedienungsanleitung für den Shark Detect Pro Akku-Staubsauger, einschließlich Montage, Verwendung, Wartung und Fehlerbehebung. Enthält Informationen zu Anti-Odour-Technologie und Akku-Pflege.
Preview Shark Cordless Detect Pro Vacuum IW4625 Series Owner's Guide
Owner's guide for the Shark Cordless Detect Pro Vacuum, IW4625 Series. Includes important safety instructions, assembly, charging, operation, maintenance, troubleshooting, and warranty information.
Preview Shark Cordless Detect Pro Vacuum Owner's Guide (IW1600/IW3600 Series)
Comprehensive owner's guide for the Shark Cordless Detect Pro Vacuum, covering assembly, safety instructions, operation, maintenance, troubleshooting, and warranty information for IW1600 and IW3600 series models.
Preview Shark Cordless Detect Pro Vacuum Owner's Guide
Comprehensive owner's guide for the Shark Cordless Detect Pro Vacuum, including assembly, usage, maintenance, troubleshooting, and warranty information for IW1000 and IW3000 series models.