Braun Shaver Cleaning and Charging System User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Braun Shaver Cleaning and Charging System, Model 0-CC. This system is designed to clean, lubricate, and charge compatible Braun electric shavers, specifically Series 5762 and 5764 models, ensuring optimal performance and hygiene.

2. Safety Instructions

Please read all safety warnings carefully before using the product.

• Water Exposure: Do not immerse the unit in water or use it near water sources. This product is an electrical appliance.
• Charging Usage: Do not operate the shaver while it is placed in the cleaning and charging system and actively charging.
• Blade Handling: Shaver blades are sharp. Exercise extreme caution when handling shaver heads or cleaning cartridges to prevent injury.
• Storage: After each cleaning cycle, ensure the shaver and the cleaning system are completely dry before storing.
• Children: Keep this appliance out of reach of children.

3. Setup

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
2. Placement: Place the cleaning and charging system on a stable, flat surface, away from direct sunlight and heat sources. Ensure it is not near any water.
3. Power Connection: Connect the power cord to the system and then plug it into an appropriate electrical outlet.
4. Insert Cleaning Cartridge: Open the system's lid and insert a fresh Braun cleaning cartridge. Close the lid securely.

4. Operating Instructions

1. Placing the Shaver: After shaving, ensure your shaver is turned off. Place the shaver head-first into the cleaning and charging system, ensuring it clicks securely into place.
2. Initiating Cleaning: The system may automatically detect the shaver and initiate a cleaning cycle. If not, press the designated cleaning button (if available on your model) to start the process.
3. Charging: The shaver will begin charging automatically once correctly placed in the system. An indicator light on the system or shaver will confirm charging status.
4. Completion: Once the cleaning and charging cycles are complete, the system will indicate this (e.g., by a change in indicator light). Remove the shaver.

5. Maintenance

• Cleaning Cartridge Replacement: Replace the cleaning cartridge when the indicator light on the system signals it is empty, or approximately every three months, depending on usage. Follow the instructions provided with the cleaning cartridge for safe replacement.
• Unit Cleaning: Periodically wipe the exterior of the cleaning and charging system with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Drying: Always allow the shaver and the system to air dry completely after cleaning to prevent residue buildup and maintain hygiene.

6. Troubleshooting

• System Not Starting: Ensure the power cord is securely plugged into both the system and the electrical outlet. Check if the cleaning cartridge is correctly inserted and the lid is closed.
• Shaver Not Charging: Verify that the shaver is properly seated in the system. Check for any debris obstructing the charging contacts on both the shaver and the system.
• Cleaning Cycle Not Initiating: Confirm that the shaver is correctly placed. If the cleaning cartridge is empty, replace it.
• Unusual Noise/Odor: Discontinue use immediately and unplug the unit. Contact customer support for assistance.

7. Specifications

8. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Braun website. If you encounter any issues not covered in this manual, or require further assistance, please contact Braun customer support.

Braun Official Website: www.braun.com