HEX BOTS 6071514

An infographic titled "HEX BOTS WALL CRAWLER GECKO: Quick Instructions & Fun Guide" showing the gecko toy, remote, and five sections: Setup & Charging, Power & Modes, Remote Control & Range, Wall Climbing & Maintenance, and Safety & Troubleshooting.
Learn how to set up, charge, and operate your HEX BOTS Wall Crawler Gecko with this quick guide. Includes details on remote control, wall climbing, maintenance, safety, and troubleshooting for hours of fun.

HEX BOTS Wall Crawler Gecko Instruction Manual

Model: 6071514 | Brand: HEX BOTS

Introduction

The HEX BOTS Wall Crawler Gecko is a remote-controlled robot toy designed to mimic the movement of a real gecko, capable of crawling across floors and climbing walls. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Wall Crawler Gecko to ensure optimal performance and enjoyment.

What's Included:

  • 1 HEX BOTS Wall Crawler Gecko
  • 1 Remote Control
  • 1 Charging Cable (USB)
  • 1 Instruction Guide (this manual)
HEX BOTS Wall Crawler Gecko and its remote control.

Image: The HEX BOTS Wall Crawler Gecko, featuring a black and green body with translucent green limbs and tail, alongside its matching translucent green remote control.

Setup

1. Remote Control Battery Installation:

The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, ensuring correct polarity (+/-). Close the compartment securely.

2. Charging the Wall Crawler Gecko:

The Wall Crawler Gecko is rechargeable via the included USB cable. Locate the charging port on the underside of the gecko. Connect the USB cable to the gecko and to a compatible USB power source (e.g., computer USB port, USB wall adapter). The LED eyes will indicate charging status (usually red while charging, off or green when fully charged). A full charge provides approximately 20-30 minutes of play time. Do not overcharge.

Close-up of the HEX BOTS Wall Crawler Gecko remote control.

Image: A close-up view of the translucent green remote control for the HEX BOTS Wall Crawler Gecko, showing its black control buttons.

Operating Instructions

1. Power On:

Locate the power switch on the underside of the Wall Crawler Gecko and slide it to the "ON" position. The gecko's LED eyes will light up. Turn on the remote control by pressing its power button.

2. Selecting Mode (Floor/Wall):

The Wall Crawler Gecko has two operating modes: Floor Mode and Wall Mode. A switch on the underside of the gecko allows you to select the desired mode. Ensure the correct mode is selected for the surface you intend to use it on.

3. Remote Control Functions:

Use the directional buttons on the remote control to maneuver the gecko. The remote offers full-function control, allowing movement in all directions. The operational range is approximately 25 feet (8 meters).

  • Forward/Backward: Controls the gecko's primary movement.
  • Left/Right: Controls turning.
  • Wall Climbing: In Wall Mode, the gecko utilizes suction technology to adhere to smooth, flat vertical surfaces. Ensure the surface is clean and free of dust for best adhesion.
Hands operating the HEX BOTS Wall Crawler Gecko remote control.

Image: A person's hands holding and operating the translucent green remote control, with the HEX BOTS Wall Crawler Gecko visible on a light-colored floor in the background.

The HEX BOTS Wall Crawler Gecko climbing a white wall.

Image: The HEX BOTS Wall Crawler Gecko, with its black and green body and bright green limbs, actively climbing a smooth white wall. Two children are blurred in the background, observing the toy.

The HEX BOTS Wall Crawler Gecko adhering to a ceiling.

Image: The HEX BOTS Wall Crawler Gecko is shown upside down, adhering to a white ceiling, demonstrating its wall-crawling capability. A young girl is lying on a bed below, looking up at the gecko.

Maintenance

Cleaning:

To clean the Wall Crawler Gecko, gently wipe it with a dry or slightly damp cloth. Do not submerge the toy in water or use harsh chemicals, as this may damage the electronic components. Regularly check the suction pads for debris and clean them to maintain wall-climbing effectiveness.

Storage:

When not in use, store the Wall Crawler Gecko and its remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods to prevent leakage.

Troubleshooting

  • Gecko not responding to remote:
    • Ensure both the gecko and remote are powered on.
    • Check if the remote control batteries are correctly installed and not depleted. Replace if necessary.
    • Ensure the gecko's battery is charged.
    • Verify that the gecko and remote are within the operational range (25 ft / 8 m).
  • Gecko not climbing walls effectively:
    • Ensure the gecko is in Wall Mode.
    • Check that the wall surface is smooth, clean, and free of dust or texture.
    • Clean the gecko's suction pads if they appear dirty or have debris.
    • Ensure the gecko's battery is sufficiently charged, as wall climbing requires more power.
  • Gecko not moving:
    • Check power switch on gecko.
    • Ensure the gecko's battery is charged.
    • Inspect for any obstructions in the gecko's movement mechanism.

Specifications

FeatureDetail
Product Dimensions12 x 2 x 7.5 inches
Item Weight10.8 ounces
Item Model Number6071514
Manufacturer Recommended Age4 years and up
Gecko BatteryRechargeable via USB
Remote Control Batteries2 AAA batteries (not included)
Operational RangeUp to 25 ft (8 m)
ManufacturerSpin Master
Release DateJune 1, 2024

Safety Information

  • Recommended for ages 4 and up.
  • WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.
  • Adult supervision is recommended during play.
  • Do not operate the gecko near water or in wet conditions.
  • Avoid operating the gecko on rough or textured surfaces in Wall Mode, as this may damage the suction mechanism.

Warranty and Support

This product is covered by the Spin Master Care Commitment. For detailed warranty information, product support, or to contact customer service, please visit the official Spin Master website or refer to the contact information provided on the product packaging.

For additional information and support, you may also visit the HEX BOTS Store on Amazon.

Related Documents - 6071514

Preview SAM Your Robotic Friend: Assembly and Instruction Manual
Comprehensive instruction and assembly manual for the SAM Your Robotic Friend robot toy by XTREM BOTS. Includes safety warnings, maintenance tips, parts list, and step-by-step building instructions.
Preview Xtrem Bots Robbie Instruction Manual
Learn how to set up, operate, and enjoy the Xtrem Bots Robbie robot toy with this comprehensive instruction manual. Discover its functions, modes, and smart controls.
Preview Lynxmotion T-HEX Robot Body Assembly Guide
Detailed, step-by-step assembly instructions for the Lynxmotion T-HEX robot body, applicable to both 3DOF and 4DOF models. This guide covers chassis construction, electronic component installation, and basic wiring.
Preview Moose Mountain Walkin' N' Talkin' Big Bots Super Sized User Manual & Operating Guide
Comprehensive user manual for the Moose Mountain Walkin' N' Talkin' Big Bots Super Sized remote control toy, covering operation, battery installation, charging, safety rules, and FCC compliance.
Preview Lakeshore Snap-Bots PP838: Educational Building Toy Guide
A guide to Lakeshore's Snap-Bots (PP838), an educational toy designed to develop motor skills, imagination, and shape recognition through building fun snap-together robots.
Preview RO1 Collaborative Robot User Manual - Standard Bots
This user manual provides comprehensive guidance for the Standard Bots RO1 Collaborative Robot. It covers essential topics including hardware overview, assembly, setup, safety protocols, software operation, and maintenance procedures for industrial automation.