VDLPOWEREU Type 2 EV Charger 16A 3.6KW

1. Introduction

Thank you for choosing the VDLPOWEREU Type 2 EV Charger. This portable electric vehicle charger is designed to provide a safe, efficient, and convenient charging solution for your electric vehicle. It features a Type 2 connector, a 16A EU Schuko plug, and offers a maximum charging power of 3.6KW. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your charger.

Image: The VDLPOWEREU EV Charger connected to an electric car, illustrating its use in a charging scenario.

2. Important Safety Instructions

Always follow these safety precautions to prevent injury or damage to the charger or your vehicle:

• Electrical Safety: Ensure the power outlet used is properly grounded and rated for 16A. Do not use extension cords or adapters.
• Water and Dust Protection: The charger unit is IP65 rated for water and dust resistance. However, the Schuko plug is not waterproof and must be kept dry during use.
• Cable Handling: Do not drive over the charging cable. Avoid bending, twisting, or stretching the cable excessively. Inspect the cable for damage before each use.
• Operating Environment: Use the charger within the specified temperature range (-30°C to +50°C). Do not use in explosive or flammable environments.
• Children and Pets: Keep the charger out of reach of children and pets.
• Emergency Disconnect: In case of an emergency, immediately unplug the charger from the power outlet.
• Protection Features: The charger includes multiple safety protections: overvoltage, overcurrent, undervoltage, short circuit, leakage, over-temperature, and EFT protection.

Image: An internal view of the charger's circuit board highlighting its 8 safety protection features, including overvoltage, surge, short circuit, temperature, leakage, overcurrent, undervoltage, and EFT protection.

Image: The charger cable being driven over by a car, illustrating its IK10 protection and shock resistance.

3. Package Contents

Please check the package for the following items:

• VDLPOWEREU Portable EV Charger (3.6KW) x 1
• Instruction Manual x 1
• Warranty Card x 1

Note: A free wall mount bracket may be available upon request. Please contact customer service for details.

4. Product Overview

The VDLPOWEREU EV Charger consists of a main control unit, a Type 2 charging connector, and an EU Schuko power plug, connected by a durable 5-meter cable.

• Control Unit: Features an LCD display for real-time charging status, current selection, and scheduled charging settings.
• Type 2 Connector: Compliant with European standard IEC 62196-2, ensuring broad compatibility with most electric vehicles.
• EU Schuko Plug: A standard European 2-pin (16A) plug for connecting to household power outlets.
• Cable: A 5-meter long cable made with a high-quality copper core and TPU material, designed for durability and flexibility in various weather conditions (-30°C to +50°C).

Image: A close-up of the Type 2 EV connector and the EU Schuko 16A plug, highlighting their design and compatibility.

Image: A user connecting the 5-meter cable to an electric vehicle, demonstrating the optimal cable length for home charging.

Image: The charger's control unit displaying options for adjustable charging time and current settings.

5. Setup

Follow these steps for initial setup:

1. Inspect the Charger: Before first use, carefully inspect the charger unit, cables, and connectors for any signs of damage. Do not use if any damage is found.
2. Connect to Power Outlet: Plug the EU Schuko power plug into a standard 16A household power outlet. Ensure the outlet is properly grounded and can support the charging current. The rated current of the socket must be 16A to utilize the full 3.6KW charging capacity.

Image: Step-by-step guide showing how to connect the charger to a Schuko socket, adjust the current, and then plug into the electric vehicle.

6. Operating Instructions

To charge your electric vehicle:

1. Connect to Vehicle: Plug the Type 2 charging connector into your electric vehicle's charging port. Ensure a secure connection.
2. Adjust Charging Current: The charger allows you to select the charging current (6A/8A/10A/13A/16A) to match your vehicle's needs or the capacity of your power outlet. Use the button on the control unit to cycle through the available current options. A long press on the button may be required to confirm the 16A setting.
3. Start Charging: Once connected and current selected, charging will begin automatically. The LCD display will show the charging status, current, voltage, and energy delivered.
4. Scheduled Charging (Optional): You can program the charger to start charging after a delay of 30 minutes up to 5 hours. This feature allows you to take advantage of off-peak electricity rates. Refer to the display and control unit buttons for setting the delay.
5. Disconnecting: After charging is complete, first unplug the Type 2 connector from your vehicle, then disconnect the Schuko power plug from the wall outlet.

Image: The charger's display showing selectable current options (6A, 8A, 10A, 13A, 16A) while charging an electric vehicle.

7. Maintenance

Proper maintenance ensures the longevity and safe operation of your charger:

• Cleaning: Wipe the charger unit and cables with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charger is unplugged before cleaning.
• Inspection: Regularly inspect the charging cable and connectors for any cuts, fraying, or damage. Check the power plug for bent pins or discoloration.
• Storage: When not in use, store the charger in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the cable neatly without kinks.

Image: The charger operating in rain and snow, demonstrating its IP65 waterproof and dustproof rating and suitability for temperatures from -30°C to +50°C.

8. Troubleshooting

If you encounter issues with your VDLPOWEREU EV Charger, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact VDLPOWEREU customer support.

9. Specifications

10. Warranty and Support

VDLPOWEREU provides a 1-year warranty for this 3.6KW EV charger. Please retain your purchase receipt and warranty card for any claims.

For technical support, warranty claims, or to inquire about the free wall mount bracket, please contact VDLPOWEREU customer service. Contact information can typically be found on the warranty card or the official VDLPOWEREU website.