Introduction
This manual provides instructions for the BURLAN Sticky Card Plug Refill Replacement Glue Cards, designed for use with compatible BURLAN Flying Insect Traps. These glue cards are effective in trapping various flying insects such as flies, fruit flies, moths, and gnats, contributing to a more comfortable indoor environment.
Important Safety Information
- The sticky cards contain a strong adhesive. Avoid direct contact with skin. In case of contact, wash thoroughly with soap and water.
- Keep out of reach of children and pets to prevent accidental contact with the adhesive.
- These cards are for indoor use only.
- Do not place near food preparation areas or where the adhesive could come into contact with food.
- Dispose of used cards responsibly according to local waste disposal regulations.
Package Contents
Your package includes:
- 10 x BURLAN Sticky Card Plug Refill Replacement Glue Cards
Note: The BURLAN Flying Insect Trap device is not included with this refill pack.
Setup and Installation
To install a new sticky card into your BURLAN Flying Insect Trap:
- Ensure the insect trap device is unplugged from the power outlet before handling.
- Locate the existing sticky card slot on the trap. If a used card is present, gently pull it out. You may use needle-nose pliers to avoid touching the adhesive.
- Take a new BURLAN Sticky Card. Carefully peel off the protective paper from the adhesive surface.
- Observe the directional arrows on the sticky card. The side marked "This side faces the lamp" should be oriented towards the light source of the trap. The arrow indicating "This direction is down" should point downwards when inserted.
- Slide the new sticky card into the designated slot on the insect trap until it is securely in place. When replacing a card, lift the plate upward to remove the old card and insert the new one.
- Plug the insect trap back into a power outlet.
Operating Instructions
The BURLAN Sticky Cards work in conjunction with your BURLAN Flying Insect Trap. Once installed, the trap's UV light attracts flying insects, which then become stuck to the adhesive surface of the card.
- For optimal trapping effect, ensure all indoor doors, windows, and other lights are closed or off, making the trap's light source the primary attraction.
- It is recommended to keep people away from the immediate vicinity of the trap for at least 12 hours, preferably 2 to 3 days, to maximize insect attraction.
- To potentially enhance attraction, you may place a transparent bottle containing 200ml of water, 20g of sugar, and 10g of baking soda near the trap.
Maintenance and Replacement
Regular replacement of the sticky cards is essential for continuous and effective insect trapping.
- Inspect the sticky card regularly.
- Replace the sticky card when it is full of insects or approximately every 20-30 days, whichever comes first.
- Follow the "Setup and Installation" steps to replace a used card with a new one.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Few or no insects trapped. |
|
|
| Sticky card not fitting correctly. |
|
|
Specifications
- Brand: BURLAN
- Model Number: QH009A (for compatible trap)
- Product Type: Sticky Card Plug Refill
- Number of Pieces: 10 Count
- Target Species: Gnat, Fly, Fruit Fly, Moth, other flying insects
- Item Weight: 1.76 ounces (approx. for 10 cards)
- Product Dimensions (per card): The provided product dimensions (1"L x 1"W x 1"H) are likely for the compatible trap device, not the individual sticky cards. The cards are designed to fit the trap's internal slot.
- Material: Adhesive-coated card
- Usage: Indoor
Warranty and Support
For any issues or inquiries regarding your BURLAN Sticky Card Plug Refill Replacement Glue Cards, please contact the seller directly through your purchase platform. Please provide your order number for faster assistance. The manufacturer aims to ensure customer satisfaction and will assist with defective products or missing components.
Note: This product is a refill for a device. Warranty for the device itself would be separate.
