Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Savoy House 4-FLOOD-MS-A2-3000K-BK Outdoor Flood Light with Motion Sensor. Please read all instructions carefully before beginning installation and retain this manual for future reference. This product is designed for outdoor use and features an integrated LED lighting system with a 270-degree motion sensor.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Improper wiring can cause electric shock or fire.
- Always turn off the main power supply before installing, cleaning, or performing any maintenance on the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- This fixture is ETL Approved for WET Locations, making it suitable for outdoor use.
- Do not attempt to modify the fixture or its components. Any modifications may void the warranty and create safety hazards.
- Ensure all electrical connections are secure and comply with local electrical codes.
Package Contents
Verify that all components are present before beginning installation:
- Savoy House 4-FLOOD-MS-A2-3000K-BK Outdoor Flood Light Fixture (Integrated LED)
- Mounting Hardware (for existing junction box)
- Instruction Manual
Specifications
| Feature | Detail |
|---|---|
| Model Number | 4-FLOOD-MS-A2-3000K-BK |
| Dimensions (Fixture) | 6.7" H x 7.87" W x 7" D |
| Backplate Dimensions | 5" x 5" x 1.77" |
| Weight | 1.89 lbs |
| Bulb Type | Integrated LED (2-Light) |
| Total Wattage | 44 Watts (22W per bulb) |
| Voltage | 120V (AC) |
| Color Temperature | 3000K |
| CRI | 80+ |
| Luminous Flux | 4000 Lumens |
| Motion Sensor Coverage | 270 degrees |
| Material | Aluminum and Glass |
| Safety Rating | ETL Approved for WET Locations |
| Warranty | 2 Year Warranty |
Installation Instructions
Before You Begin
- Ensure the power to the installation area is turned off at the circuit breaker.
- Gather necessary tools: screwdriver, wire strippers, electrical tape, ladder (if needed).
- This fixture is designed for wall or ceiling mounting to an existing junction box.
Mounting the Fixture
- Carefully unpack the fixture and inspect for any damage.
- Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
- Connect the electrical wires: Connect the black wire from the fixture to the black (live) wire from the junction box. Connect the white wire from the fixture to the white (neutral) wire from the junction box. Connect the ground wire from the fixture to the ground wire from the junction box. Use wire nuts to secure connections and wrap with electrical tape.
- Carefully tuck all wires into the junction box.
- Align the fixture with the mounting bracket and secure it with the provided screws.
- Adjust the floodlight heads to the desired angle.
Operating Instructions
The Savoy House flood light features an integrated motion sensor that detects movement within a 270-degree range. The sensor has adjustable settings for sensitivity, time, and lux (daylight sensor).
Motion Sensor Adjustment
Locate the adjustment dials on the underside of the motion sensor unit. These dials allow you to customize the sensor's behavior.
- SENS (Sensitivity): Adjusts the detection range of the motion sensor. Turn clockwise for a wider range, counter-clockwise for a narrower range.
- TIME: Sets how long the light remains on after motion is detected. Turn clockwise for a longer duration, counter-clockwise for a shorter duration.
- LUX (Daylight Sensor): Determines the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for the sensor to activate only in low light conditions (night). Turn towards the moon icon for the sensor to activate in both day and night conditions.
After adjusting, test the settings to ensure they meet your requirements. Allow a few minutes for the sensor to calibrate after power is restored or settings are changed.
Maintenance
The Savoy House flood light features integrated LED bulbs, which are designed for long-lasting performance and do not require replacement. Regular maintenance is minimal.
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, damp cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your flood light, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty wiring, incorrect sensor settings. | Check circuit breaker. Verify wiring connections. Adjust LUX setting to ensure it's not set for daylight only. |
| Light stays on constantly. | Sensor in test mode, continuous motion, incorrect TIME setting. | Ensure no continuous motion is in the detection zone. Adjust TIME setting to a shorter duration. Check if the sensor is stuck in a test mode (refer to specific sensor instructions if applicable). |
| Light turns on during the day. | LUX setting too high (towards moon icon). | Adjust LUX setting towards the sun icon to activate only in low light conditions. |
| Motion sensor not detecting. | SENS setting too low, obstruction, incorrect mounting height. | Increase SENS setting. Clear any obstructions. Ensure the fixture is mounted at an appropriate height for optimal detection. |
Warranty and Customer Support
This Savoy House flood light is covered by a 2-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact Savoy House customer support:
- Website: www.savoyhouse.com
- Phone: Refer to the Savoy House website for current contact numbers.
- Email: Refer to the Savoy House website for customer service email.
Please have your model number (4-FLOOD-MS-A2-3000K-BK) and proof of purchase available when contacting support.