STANLEY Quencher H2.0 FlowState Stainless Steel Vacuum Insulated Tumbler

Introduction

This manual provides instructions for the proper use and care of your STANLEY Quencher H2.0 FlowState Stainless Steel Vacuum Insulated Tumbler. Designed to keep your beverages hot or cold for extended periods, this tumbler features durable stainless steel construction, double-walled vacuum insulation, and a versatile FlowState lid. Please read these instructions carefully before first use to ensure optimal performance and longevity of your product.

The STANLEY Quencher H2.0 FlowState tumbler is crafted from 90% recycled BPA-free stainless steel, emphasizing sustainability. Its ergonomic, comfort-grip handle and narrow base (on most sizes) are designed for convenience, fitting most car cup holders.

Setup

1. Unpack Components: Carefully remove the tumbler, lid, and reusable straw from the packaging.
2. Initial Cleaning: Before first use, wash all components (tumbler, lid, and straw) with warm, soapy water. Rinse thoroughly and allow to air dry.
3. Lid Assembly: Place the FlowState lid onto the tumbler and twist clockwise until securely fastened. Ensure the lid is properly aligned and tightened to prevent leaks.
4. Straw Insertion: Insert the reusable straw into the designated straw opening on the lid.

Image: STANLEY Quencher H2.0 FlowState Stainless Steel Vacuum Insulated Tumbler in Heather color with lid and straw.

Operating Instructions

• Filling the Tumbler: Unscrew the lid counter-clockwise to remove. Fill the tumbler with your desired beverage. Do not overfill.
• FlowState Lid Positions: The advanced FlowState lid features a rotating cover with three positions:
  • Straw Opening: Designed to resist splashes with a seal that holds the reusable straw in place.
  • Drink Opening: For direct sipping without the straw.
  • Full-Cover Top: Provides added leak resistance when closed, ideal for transport or maintaining beverage temperature.
• Temperature Retention: The double-wall vacuum insulation keeps drinks cold, iced, or hot for hours. For best results with hot beverages, pre-heat the tumbler with hot water for 5 minutes before filling. For cold beverages, pre-chill with cold water.
• Car Cup Holder Compatibility: The narrow base of the tumbler (on 14oz, 20oz, 30oz, 40oz sizes) is designed to fit most car cup holders.

Maintenance

• Dishwasher Safe: All components of the STANLEY Quencher H2.0 FlowState Tumbler are dishwasher safe for easy cleaning. Place the tumbler, lid, and straw on the top rack of your dishwasher.
• Hand Washing: If hand washing, use warm water and mild dish soap. Use a bottle brush for the interior of the tumbler and a straw brush for the straw. Ensure all parts are thoroughly rinsed to remove soap residue.
• Lid Disassembly for Cleaning: The rotating cover on the lid can be carefully removed for more thorough cleaning. Gently pry it off, clean all parts, and reassemble by snapping it back into place.
• Drying: Allow all components to dry completely before reassembling or storing to prevent odor and mildew.

Troubleshooting

• Leaking: If your tumbler is leaking, ensure the lid is screwed on tightly and correctly aligned. Check the silicone seal around the lid and the straw opening for any damage or misalignment. Ensure the rotating cover is in the full-cover position for maximum leak resistance during transport.
• Poor Temperature Retention: Verify that the lid is securely closed and sealed. Damage to the vacuum insulation is rare but can occur if the tumbler is severely dented.
• Difficulty Cleaning: For stubborn stains or odors, a mixture of baking soda and water can be used. Let it sit for a few hours before scrubbing and rinsing.

Specifications

Warranty and Support

For warranty information or product support, please refer to the official STANLEY website or contact their customer service directly. Keep your purchase receipt as proof of purchase.