Introduction
This manual provides comprehensive instructions for the YAOHUIMI Replacement Remote Control, designed to operate various R.W.Flame Electric Fireplace models. This remote control requires no programming and is ready for use after battery installation.
Compatible R.W.Flame Electric Fireplace Models:
- RFH-6801LC
- RFH-3001LA, RFH-3001LB
- RFH-3601LA, RFH-3601LB
- RFH-2601LC
- RH-3001LA, RH-3001LB, RH-3001LC
- RH-3601LA, RH-3601LB, RH-3601LC
- RFH-4001LA
Please ensure your original remote control matches the appearance of this replacement remote for proper compatibility.
Image: Front view of the YAOHUIMI replacement remote control, highlighting its ready-to-use nature without programming.
Setup: Battery Installation
The remote control requires two AAA 1.5V batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA 1.5V batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery compartment open, indicating the use of AAA 1.5V batteries.
Note: This remote control is designed for AAA 1.5V batteries, offering a longer lifespan compared to older coin battery designs.
Image: Visual comparison illustrating the new design using AAA 1.5V batteries for extended durability versus an older design using coin batteries.
Operating Instructions
Point the remote control directly at your R.W.Flame Electric Fireplace to ensure proper signal transmission. The remote features several buttons for controlling various functions:
Image: Front view of the remote control with labels indicating the function of each button.
| Button | Function |
|---|---|
| ON/OFF | Powers the electric fireplace on or off. |
| + / - (Triangles) | Adjusts settings such as temperature or flame intensity (functionality may vary by fireplace model). |
| COLOR A | Controls the flame color settings. |
| COLOR B | Controls the flame bed color settings. |
| HEAT | Activates or deactivates the heater function. |
| DIMMER | Adjusts the brightness of the flame effect. |
| SPEED | Adjusts the speed of the flame effect. |
| TIMER | Sets or adjusts the fireplace's timer function. |
Note: Specific functions and their behavior may vary depending on your R.W.Flame Electric Fireplace model. Refer to your fireplace's manual for detailed information on its features.
Maintenance
Battery Replacement
When the remote control's performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section, using two fresh AAA 1.5V batteries.
Cleaning
To clean the remote control, gently wipe its surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's electronics or finish.
Storage
If the remote control will not be used for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the device.
Troubleshooting
- Remote Not Responding:
- Ensure fresh AAA 1.5V batteries are correctly installed.
- Verify there are no obstructions between the remote control and the fireplace's receiver.
- Confirm you are within the effective operating range of the fireplace.
- Specific Functions Not Working:
- Some functions may be specific to certain R.W.Flame fireplace models. Refer to your fireplace's original manual.
- Ensure the remote control is compatible with your exact fireplace model. The appearance of this replacement remote should match your original.
Specifications
| Feature | Detail |
|---|---|
| Model Number | A424011101G09 (GAO04) |
| Brand | YAOHUIMI |
| Compatible Fireplace Brand | R.W.Flame |
| Battery Type | 2 x AAA 1.5V (not included) |
| Item Weight | 1.06 ounces |
| Package Dimensions | 0.39 x 0.2 x 0.08 inches |
| Special Feature | No programming needed |
Warranty and Support
For warranty information or technical support regarding your YAOHUIMI Replacement Remote Control, please contact the seller or the manufacturer, HUIMIKEJI, directly. Details regarding specific warranty periods and support procedures are typically provided at the point of purchase or on the manufacturer's official website.
Manufacturer: HUIMIKEJI
Brand: YAOHUIMI
Seller: Remotes US (as per Amazon listing)