1. Introduction
The Aqara Wall Outlet H2 EU is a smart wall outlet designed to control appliances up to 16 amperes and monitor their energy consumption. It integrates the power status of connected devices into smart home automations and supports Matter over Bridge for local access via third-party applications. This manual provides essential information for the safe and efficient use of your Aqara Wall Outlet H2 EU.
Image 1.1: Aqara Wall Outlet H2 EU and its packaging.
2. Key Features
- HomeKit and Matter Support: Seamless integration with major smart home platforms (requires Aqara Zigbee 3.0 hub).
- Versatile Control Options: Control devices via physical button, remote application, or voice assistants.
- Energy Consumption Monitoring: Real-time tracking of power usage for connected appliances.
- Power Automations: Create smart routines based on energy consumption patterns.
- Customizable Electrical Protection: Advanced safety features including over-current, overheating, and overcharge prevention.
- 55 mm Wall Plate Compatibility: Designed to fit standard European 55 mm wall plates.
3. Setup and Installation
A compatible Aqara Zigbee 3.0 hub (excluding Camera Hub G2H) is required for full functionality and Matter-over-bridge support. Ensure the hub is set up and connected to your network before installing the wall outlet.
The Wall Outlet H2 EU is designed for installation in standard 55 mm wall plates. It comes with one 55x55 mm wall plate and is compatible with other common 55x55 mm wall plates from brands like Schneider Merten System M and Atlas Design. Installation involves connecting the wires via screw terminals. Consult a qualified electrician if you are unsure about electrical wiring procedures.
Image 3.1: Compatibility with 55 mm wall plate frames.
Image 3.2: Zigbee 3.0 and Matter support with smart home ecosystems.
4. Operating Instructions
The Aqara Wall Outlet H2 EU offers multiple control methods:
- Physical Button: Press the button on the outlet to manually turn connected devices on or off.
- Aqara Home App: Use the Aqara Home application on your smartphone to remotely control the outlet, set schedules, and configure automations.
- Voice Control: Integrate with Apple HomeKit, Google Home, or Alexa for hands-free control using voice commands.
Energy Monitoring: The Aqara Home app provides real-time energy consumption data, allowing you to track usage and create energy-saving automations.
Power Automations: Configure the outlet to react to power consumption changes, such as turning off a device when its power draw drops below a certain threshold (e.g., 0-2W for over 30 minutes to prevent overcharging).
Image 4.1: Energy consumption monitoring in the Aqara Home app.
Image 4.2: Examples of customized power configurations.
5. Safety Information
The Wall Outlet H2 EU includes advanced safety features to protect your appliances and home:
- Over-current Protection: Automatically cuts power if consumption exceeds defined limits (configurable from 100-3840 W).
- Overheating Protection: Shuts off power in case of overheating.
- Overcharge Prevention: Prevents overcharging by cutting power when consumption falls below a configurable threshold (0-2 W) for more than 30 minutes, ideal for overnight charging.
Power-off Memory: The outlet retains its last state after a power outage, ensuring consistent operation.
Image 5.1: Internal view highlighting power-off memory.
6. Maintenance
Regularly inspect the outlet for any signs of damage or wear. Ensure the area around the outlet is clean and free from obstructions. Do not attempt to repair the device yourself; contact qualified personnel for service. Disconnect power before cleaning the device. Use a dry, soft cloth for cleaning.
7. Troubleshooting
- Device not responding: Check if the Aqara Zigbee hub is online and within range. Ensure the outlet has power. Try re-pairing the device with the hub according to the Aqara Home app instructions.
- Energy monitoring inaccurate: Verify that the connected appliance is within the supported power range (up to 16A, 3680W). Ensure the outlet firmware is up to date via the Aqara Home app.
- Voice control not working: Confirm integration with your chosen smart home platform (HomeKit, Google Home, Alexa) is correctly configured. Check network connectivity for both the hub and your voice assistant device.
- Outlet not fitting wall plate: Ensure you are using a standard 55 mm wall plate. If issues persist, consult the installation guide or a professional.
8. Specifications
| Model Number | WP-P01D |
| Brand | Aqara |
| Color | White |
| Product Dimensions (L x W x H) | 8.6 x 8.6 x 0.1 cm |
| Weight | 150 grams |
| Voltage | 250 Volts |
| Amperage | 16 A |
| Power | 3680 Watts |
| Connector Type | Schuko (Type E/F) |
| Compliant Specifications | Zigbee 3.0, Matter |
| Compatible Devices | All devices within specified power limits |
| Manufacturer | Lumi United Technology Co., Ltd |
9. Warranty and Support
For detailed warranty information, technical support, and customer service, please refer to the official Aqara website or contact Aqara customer support directly. It is recommended to keep your purchase receipt for any warranty claims.
