LITTLE TREE 70.9 Inch Industrial Sofa Table

1. Product Overview

This manual provides detailed instructions for the assembly, operation, and maintenance of your LITTLE TREE 70.9 Inch Industrial Sofa Table. Designed with a vintage wood grain veneer and a geometric black metal frame, this versatile table offers ample storage and enhances various living spaces.

2. Safety Information

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Always assemble according to the provided instructions.
• Use on level surfaces to prevent tipping.
• Do not place heavy objects on the table that could cause it to tip over.
• Keep small parts away from children during assembly to prevent choking hazards.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Tabletop (Engineered Wood)
• Bottom Shelf (Engineered Wood)
• Metal Frame Components (Legs, Crossbars, Decorative Panels)
• Adjustable Foot Pads
• Assembly Hardware (Screws, Allen Wrench)
• Assembly Guide (This document)

4. Setup and Assembly Instructions

Assembly is designed to be straightforward. It is recommended that one person assemble this unit. Please follow these steps carefully.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Refer to the parts list to identify each component.
2. Attach Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of the metal leg frames. Do not overtighten.
3. Assemble Metal Frame: Connect the metal leg frames with the crossbars using the provided screws and Allen wrench. Ensure the decorative metal panels are oriented correctly. Hand-tighten screws initially.
4. Attach Bottom Shelf: Place the bottom shelf onto the assembled metal frame. Secure it using the designated screws.
5. Attach Tabletop: Carefully place the tabletop onto the top of the metal frame. Align the pre-drilled holes and secure the tabletop with the remaining screws.
6. Final Tightening: Once all components are in place, go back and fully tighten all screws. Do not overtighten to avoid stripping.
7. Level the Table: Adjust the foot pads as needed to ensure the table is stable and level on your floor.

5. Operating Instructions (Usage)

The LITTLE TREE Industrial Sofa Table is designed for versatile use in various indoor settings.

• Behind Sofa/Couch: Position the table behind your sofa to provide a convenient surface for drinks, remote controls, lamps, or decorative items.
• Entryway/Hallway Table: Use it in an entryway or hallway as a console table for keys, mail, or decorative displays.
• Display Shelf: Utilize the two tiers (tabletop and bottom shelf) to display books, plants, photo frames, or other decorative pieces.
• Home Bar/Pub Table: Can be used with bar stools for additional seating or serving space.

6. Maintenance

Proper care will ensure the longevity and appearance of your sofa table.

• Cleaning: Wipe with a damp cloth for general cleaning. For spills, wipe immediately with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Dusting: Regularly dust with a soft, dry cloth.
• Protection: Use coasters under drinks and placemats under hot items to protect the tabletop surface.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

7. Troubleshooting

If you encounter any issues with your sofa table, refer to the following common problems and solutions.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the purchase documentation or contact the retailer directly. Keep your proof of purchase for any warranty claims.