IMOUMLIVE DCJBS

IMOUMLIVE 15" Cordless Weed Wacker & Edge Trimmer User Manual

Model: DCJBS

Brand: IMOUMLIVE

Important Safety Information

Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Product Overview

The IMOUMLIVE 15-inch Cordless Weed Wacker & Edge Trimmer is a versatile 2-in-1 tool designed for efficient lawn care. It features a lightweight design, powerful brushless motor, and adjustable settings for comfortable operation.

IMOUMLIVE 15-inch Cordless Weed Wacker and Edge Trimmer

Image: The IMOUMLIVE 15-inch Cordless Weed Wacker and Edge Trimmer, showcasing its main components and battery.

Key Features

Components

The IMOUMLIVE 15" Cordless Weed Wacker & Edge Trimmer comes with the following main components:

Diagram of IMOUMLIVE Weed Wacker components

Image: An exploded view showing the adjustable handle, adjustable height, 4.0 battery, auto-line feed system, quick-load adjustable wheels, brushless motor system, and 15-inch cut swath.

Setup Guide

Assembly

Follow these steps to assemble your IMOUMLIVE Weed Wacker:

  1. Attach the rubber assist wheels to the main unit using the provided screwdriver. Ensure they are securely tightened.
  2. Snap the splash guard into position, aligning it with the machine's housing.
  3. Install the trimmer head. Rotate the trimmer head to align the holes on the thrust plate guard washer with the holes on the machine housing. Insert a screwdriver to lock the drive shaft from turning. Tighten the trimmer head counterclockwise to secure it. Important: Ensure the guillotine head is completely tightened and remove the screwdriver before operation. Ignoring this step may lead to potential danger.
  4. Insert the 4.0Ah Lithium-Ion battery into the battery slot until it clicks into place.
  5. Adjust the auxiliary handle to a comfortable position (180° adjustable).
  6. Adjust the telescopic shaft to your desired height.

Video: Official IMOUMLIVE guide on how to install the weed wacker components, including attaching the wheels, splash guard, and trimmer head, and installing the battery.

Operating Instructions

Weed Wacker Mode

To use as a weed wacker, ensure the trimmer head is in the horizontal position. Hold the tool firmly with both hands, keeping the splash guard between you and the cutting line. Move the trimmer in a sweeping motion across the area to be trimmed.

IMOUMLIVE Weed Wacker in String Trimmer mode

Image: The IMOUMLIVE tool operating as a string trimmer, cutting grass effectively.

Edge Trimmer Mode

To switch to edge trimmer mode, adjust the rubber wheels and tilt the trimmer head 0-90° to the vertical position. This allows for precise edging along sidewalks, driveways, and flower beds. Roll the wheels along the hard surface for a clean, straight edge.

IMOUMLIVE Weed Wacker in Edge Trimmer mode

Image: The IMOUMLIVE tool converted to an edge trimmer, demonstrating its dual functionality with the adjustable wheels.

Adjustments

Maintenance

String Trimmer Line Replacement

To replace the string trimmer line:

  1. Ensure the battery is removed from the tool.
  2. Rotate the trimmer head to align the holes on the thrust plate guard washer with the holes on the machine housing. Insert a screwdriver to lock the drive shaft from turning.
  3. Rotate the trimmer head counterclockwise and remove it.
  4. Remove the protective case by squeezing the snaps on both sides of the trimmer head.
  5. Insert the new string trimmer line into the slot in the direction shown and wind it in the corresponding direction. Leave a small piece of string line and buckle it on the buckle to secure it.
  6. Align the snaps of the protective case and pinch the buckles on both sides, pressing down to snap the protective case into place.
  7. Reattach the trimmer head to the drive shaft, tightening it clockwise until secure.

Video: Official IMOUMLIVE guide on how to replace the string trimmer head and line.

General Care

Troubleshooting

If you encounter issues with your IMOUMLIVE Weed Wacker, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Tool does not start.Battery not charged or improperly inserted.Ensure battery is fully charged and correctly inserted. Check battery indicator lights.
Cutting line does not extend.Line is jammed or too short.Tap the trimmer head on the ground while running. If still stuck, remove battery and manually pull out line or replace spool.
Reduced cutting performance.Worn or incorrect line, or motor overload.Replace cutting line. Avoid forcing the tool through dense vegetation.
Excessive vibration.Damaged or improperly installed trimmer head/line.Inspect trimmer head and line for damage. Ensure all components are securely fastened.

If the issue persists, please contact customer support.

Specifications

Warranty and Support

Your IMOUMLIVE Weed Wacker is covered by a 12-month free maintenance and replacement services warranty.

For any questions, suggestions, or support needs, please contact our customer service team. We aim to respond within 24 hours.

For further assistance, visit the official IMOUMLIVE Store: IMOUMLIVE Store