VINABTY EUR7711060
VINABTY Replacement Remote Control EUR7711060
For Panasonic CD HIFI Audio Systems (Models: SAPM28, SC-PM28, SA-PM28)
Introduction
This manual provides instructions for the VINABTY EUR7711060 replacement remote control. This remote is designed to function as a direct replacement for the original remote control of compatible Panasonic CD HIFI Audio Systems. No programming or setup is required; simply install batteries to begin operation.
1. Setup
1.1 Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 1: Open battery compartment showing battery orientation.
1.2 Compatibility
This remote control is compatible with the following Panasonic CD HIFI Audio System models:
- EUR7711060
- SAPM28
- SC-PM28
- SA-PM28
No additional programming or pairing is required for these models. The remote is ready for use once batteries are installed.
2. Operating Instructions
The VINABTY EUR7711060 remote control provides full functionality for your compatible Panasonic CD HIFI Audio System. Below is an overview of the remote's layout and common button functions.
Figure 2: Front view of the remote control with button layout.
2.1 Button Functions
| Button | Function |
|---|---|
| POWER (Red Button) | Turns the audio system on or off. |
| DISC | Selects the CD function. |
| PROGRAM | Used for programming CD tracks. |
| PLAY MODE | Changes the playback mode (e.g., normal, random, repeat). |
| REPEAT | Repeats the current track or entire disc. |
| DEL | Deletes programmed tracks. |
| Numeric Buttons (0-9, ≥10) | Direct selection of tracks or radio presets. |
| CD / II | Play/Pause for CD playback. |
| CLEAR | Clears entries or selections. |
| TAPE | Selects the Tape function. |
| TUNER / BAND | Selects the Tuner function and changes radio bands (FM/AM). |
| AUX | Selects the Auxiliary input. |
| VOL - / VOL + | Decreases or increases the volume level. |
| << (V/REW) / >> (/∧FF) | Rewind / Fast Forward. |
| |<< (ALBUM) / >>| (TITLE) | Skips to previous/next track or album. |
| INTRO | Plays the introduction of each track. |
| MARKER | Marks specific points during playback. |
| SEARCH | Initiates search function. |
| ENTER | Confirms selections. |
| SOUND | Accesses sound settings. |
| MUTING | Mutes or unmutes the audio output. |
| SHIFT | Activates secondary functions of certain buttons. |
| RE-MASTER | Activates audio re-mastering feature. |
| S.SOUND EQ | Activates sound equalizer settings. |
| AUTO OFF | Sets the automatic power off timer. |
| SLEEP | Sets the sleep timer. |
| CLOCK / TIMER | Accesses clock and timer settings. |
| DISPLAY | Changes display information or brightness. |
| PLAY / REC | Initiates playback or recording (if supported by the audio system). |
| DIMMER | Adjusts the display dimmer. |
3. Maintenance
Proper maintenance ensures the longevity and optimal performance of your remote control.
- Cleaning: Wipe the remote control with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents.
- Battery Replacement: Replace batteries when the remote's range decreases or it becomes unresponsive. Always replace both batteries simultaneously with new ones of the same type (AAA).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place away from direct sunlight.
4. Troubleshooting
If you encounter issues with your remote control, refer to the following common solutions:
- Remote not responding:
- Check if the batteries are installed correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the audio system's infrared receiver.
- Verify that the remote is pointed directly at the audio system.
- Limited operating range:
- Replace the batteries. Low battery power can reduce the effective range.
- Ensure no strong light sources (e.g., direct sunlight, fluorescent lights) are interfering with the infrared signal.
- Specific buttons not working:
- Clean the remote control, especially around the unresponsive buttons, to remove any dirt or debris.
- Ensure the audio system is in the correct mode for the button's function (e.g., CD mode for CD controls).
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | EUR7711060 |
| Brand | VINABTY |
| Compatible Models | Panasonic EUR7711060, SAPM28, SC-PM28, SA-PM28 |
| Connectivity Technology | Infrared (IR) |
| Maximum Range | Approximately 10 meters (33 feet) |
| Material | ABS |
| Color | White/Grey (as pictured) |
| Battery Type | 2 x AAA (not included) |
| Number of Buttons | Multiple (refer to Figure 2 for layout) |
6. Warranty and Support
For any questions or issues regarding your VINABTY remote control, please contact the seller directly. They are committed to providing a satisfactory response within 24 hours.
Please refer to your purchase documentation for specific warranty details, if applicable.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.