Oneisall Dog Clippers DTJ001 User Manual

1. Introduction

Thank you for choosing the Oneisall Dog Clippers DTJ001. This cordless, rechargeable trimmer is designed to provide efficient and comfortable grooming for your pets, especially those with thick or heavy coats. Featuring a low-noise motor, two-speed settings, and durable stainless steel blades, this device aims to simplify your pet grooming routine. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

2. Safety Information

Caution: Please read and follow all safety instructions to prevent injury or damage.

• Keep blades away from eyes and face.
• Do not use on infants.
• Keep away from water.
• Always unplug and allow to cool before cleaning.
• Follow recommended maintenance procedures.
• Store the clippers and accessories in a dry, safe place out of reach of children and pets.
• Do not attempt to disassemble or repair the unit yourself. Contact customer service for assistance.

3. Product Overview & What's Included

The Oneisall Dog Clippers DTJ001 comes with a comprehensive set of tools to assist with your grooming needs.

Image: Oneisall Dog Clippers DTJ001 and included accessories.

Package Contents:

• Oneisall Dog Clipper (Model DTJ001)
• 6 Guide Combs (3 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm)
• Cleaning Brush
• Grooming Oil
• Charging Cable (USB Type-C)
• User Manual

Key Features:

• Stainless Steel Metal Blades: Designed for thick, heavy, knotted, and curly hair. More durable than ceramic or regular blades, resistant to rusting and dulling.
• 2-Speed Super Power Motor: 7000 RPM motor for efficient cutting without snagging or pulling.
• Low Noise Operation: Operates at less than 50 dB to keep pets calm during grooming.
• Detachable & Washable Blade: Easy to clean and maintain for extended blade life.
• Long-Life Battery: 2000 mAh battery provides approximately 3.5 hours of use on a single charge.
• LCD Display: Clearly shows remaining battery level and usage/charging status.

4. Specifications

5. Setup

5.1 Initial Charging

Before first use, fully charge the clippers. Connect the charging cable to the clipper and a suitable USB power adapter. The LCD display will indicate the charging status and battery percentage. A full charge typically takes approximately 3 hours.

Image: Clippers charging, illustrating battery life for multiple grooming sessions.

5.2 Attaching Guide Combs

Select the desired guide comb based on the hair length you wish to achieve. The clippers come with 6 different sizes (3mm, 6mm, 9mm, 12mm, 18mm, 24mm).

1. Ensure the clipper is turned off.
2. Align the chosen guide comb with the clipper blade.
3. Slide the comb firmly onto the blade until it clicks into place.
4. To remove, gently push the comb off the blade.

Image: Six guide combs for various hair lengths.

6. Operating Instructions

6.1 Pre-Grooming Preparation

Before clipping, ensure your pet's coat is clean, dry, and free of tangles or mats. Brush your pet thoroughly to remove loose hair and knots. This will help the clippers glide smoothly and prevent pulling.

6.2 Turning On/Off and Speed Settings

Press the power button to turn the clippers on. The LCD display will show the current speed setting (Low or High) and battery level. Press the power button again to switch between the two speed settings. The low-speed setting (5000 RPM) is ideal for anxious pets or sensitive areas, while the high-speed setting (7000 RPM) is suitable for thicker coats and less sensitive dogs.

Image: Two-speed settings for varied grooming needs.

6.3 General Clipping Technique

1. Hold the clippers firmly and comfortably in your hand. The ergonomic design assists with maneuverability.
2. Always clip in the direction of hair growth for a smoother, more natural finish.
3. Use gentle, even strokes. Do not press too hard against the skin.
4. For areas with thicker hair, you may need to go over them multiple times or use a lower comb setting first.
5. Regularly check the blade for hair buildup and clean as needed to maintain optimal performance.

Image: Clippers effectively cutting through thick dog hair.

6.4 Grooming Sensitive Areas

For sensitive areas like paws, face, and around the ears, use the narrow blade attachment (if included or use the clippers without a comb for precision). Always exercise extreme caution and use the low-speed setting. Gently stretch the skin to create a flat surface for clipping.

Image: Clippers suitable for full body grooming, including sensitive areas.

6.5 Quiet Operation for Pet Comfort

The clippers are designed to operate with low noise (below 50 dB) to minimize stress and fear in pets. Introduce the clippers gradually to your pet, allowing them to get accustomed to the sound and vibration before starting the grooming process.

Image: Low noise operation ensures pet comfort.

6.6 Official Product Video: Grooming for Thick Coats

7. Maintenance

7.1 Cleaning the Blades

After each grooming session, it is crucial to clean the blades to ensure hygiene and prolong their lifespan.

1. Turn off the clippers.
2. Detach the blade by gently pushing it forward until it separates from the clipper body.
3. Use the provided cleaning brush to remove any trapped hair from the blade and the clipper head.
4. The stainless steel blade is washable. Rinse the detached blade under running water. Ensure the clipper body does not get wet.
5. Dry the blade thoroughly before reattaching it to the clipper.

Image: Detachable and washable metal blade for easy cleaning.

7.2 Oiling the Blades

Regularly oiling the blades helps maintain their sharpness and smooth operation.

1. After cleaning and drying the blades, apply a few drops of the provided grooming oil to the teeth of the blade.
2. Turn the clippers on for a few seconds to distribute the oil evenly.
3. Wipe off any excess oil with a soft cloth.

7.3 Battery Care

To maximize battery life, avoid completely draining the battery before recharging. Recharge the clippers when the LCD display indicates a low battery level. Store the clippers in a cool, dry place when not in use.

Image: Clear LCD display for battery and oil reminders.

8. Troubleshooting

9. Warranty and Support

Oneisall offers a 2-Year Warranty on this product. For any questions, concerns, or technical support, please contact our 24-hour Customer Service.

Image: Warranty and customer support information.