AIRBANK Puffer Pro D13PRO Electric Paddle Board Pump Instruction Manual

1. Introduction

Thank you for choosing the AIRBANK Puffer Pro D13PRO Electric Paddle Board Pump. This portable, dual-stage pump is designed for efficient inflation and deflation of various inflatables, including Stand Up Paddle Boards (SUPs), kayaks, inflatable boats, tents, mattresses, and kite wings. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Important Safety Instructions

• Do not operate the pump in wet conditions or immerse it in water.
• Keep the pump away from children.
• Ensure the air intake and outlet are clear of obstructions during operation.
• Do not exceed the recommended pressure for your inflatable item. Refer to the inflatable's manufacturer specifications.
• Avoid continuous operation for extended periods. Allow the pump to cool down after 15-20 minutes of use to prevent overheating.
• Use only the provided charging cable and power adapter.
• Do not attempt to disassemble or repair the pump yourself. Contact customer support for assistance.

3. Package Contents

Verify that all items are present in your package:

• AIRBANK Puffer Pro Electric SUP Pump
• Air Hose
• 7 x Air Nozzles (various types for different valves)
• Charging Cable (DC)
• Storage Bag
• User Manual

Image: All components included in the AIRBANK Puffer Pro package.

4. Product Overview and Components

Familiarize yourself with the main parts of your AIRBANK Puffer Pro pump:

Image: Front view of the AIRBANK Puffer Pro pump and included nozzles.

• Digital LED Screen: Displays target pressure and real-time pressure.
• Power Button: Turns the pump on/off.
• Pressure Adjustment Buttons (+/-): Increases or decreases the target pressure.
• Unit Button: Switches between PSI and BAR.
• Light Button: Activates the built-in light for dark conditions.
• Inflate Port: For connecting the hose to inflate items.
• Deflate Port: For connecting the hose to deflate items.
• Charging Port: For connecting the DC charging cable.

5. Setup and Charging

5.1 Charging the Pump

Before first use, fully charge the pump. A full charge typically takes approximately 2 hours.

1. Connect the provided DC charging cable to the pump's charging port.
2. Plug the other end of the charging cable into a suitable power adapter (not included) or USB port.
3. The digital display will indicate charging status.

Image: Charging the AIRBANK Puffer Pro pump.

5.2 Attaching the Hose and Nozzle

1. Select the appropriate nozzle for your inflatable's valve.
2. Attach the selected nozzle to one end of the air hose.
3. For inflation, securely screw the other end of the air hose into the 'INFLATE' port on the pump.
4. For deflation, securely screw the other end of the air hose into the 'DEFLATE' port on the pump.

6. Operating Instructions

6.1 Inflation

1. Ensure the hose is connected to the 'INFLATE' port and the correct nozzle is attached to your inflatable.
2. Press the Power button to turn on the pump. The digital display will illuminate.
3. Use the '+' and '-' buttons to set your desired target pressure. The pump supports up to 20 PSI.
4. Press the Power button again to start inflation.
5. The pump will operate in two stages: the first stage provides maximum speed (400 L/min) for rapid initial inflation, and the second stage provides maximum pressure (75 L/min) to reach the target PSI.
6. The pump will automatically stop once the set pressure is reached.
7. Disconnect the hose from the inflatable and the pump.

Image: AIRBANK Puffer Pro in use, inflating a paddle board.

Image: Dual-stage inflation mechanism of the pump.

6.2 Deflation

1. Ensure the hose is connected to the 'DEFLATE' port on the pump and the correct nozzle is attached to your inflatable.
2. Press the Power button to turn on the pump.
3. Press the Power button again to start deflation.
4. The pump will actively remove air from the inflatable, making packing easier.
5. Once deflation is complete, press the Power button to stop the pump.
6. Disconnect the hose from the inflatable and the pump.

6.3 Wide Application

The AIRBANK Puffer Pro is compatible with a variety of inflatables due to its comprehensive set of nozzles:

• Stand Up Paddle Boards (SUPs)
• Kayaks
• Inflatable Boats
• Air Mattresses
• Inflatable Tents
• Kite Wings
• Swimming Rings and other recreational inflatables

Image: Examples of various inflatables compatible with the pump.

7. Maintenance

7.1 Cleaning

• Wipe the exterior of the pump with a soft, dry cloth.
• Do not use harsh chemicals or abrasive cleaners.
• Ensure the air intake and outlet ports are free from dust and debris.

7.2 Storage

• Store the pump and accessories in the provided storage bag.
• Keep the pump in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery to approximately 50% every 3-6 months to maintain battery health.

8. Troubleshooting

9. Specifications

• Model: D13PRO
• Product Dimensions: 16.4 x 8.6 x 19.0 cm (6.46 x 3.39 x 7.48 inches)
• Item Weight: 1.26 kg (2.78 lbs)
• Max Pressure: 20 PSI
• Pressure Accuracy: ±0.2 PSI
• First Stage Speed: 400 L/min
• Second Stage Speed: 75 L/min
• Battery: 6 Lithium Ion batteries (included), 5200mAh
• Power Source: Battery Powered
• Material: Plastic (Nylon+Fiberglass), PTFE+PI (Piston Bowl), 304 Stainless Steel (Air Intake Valve)
• Included Components: SUP pump, bag, cable, hose, nozzles, manual

Image: Size comparison of the AIRBANK Puffer Pro pump.

10. Warranty and Customer Support

AIRBANK stands behind the quality of its products. Your AIRBANK Puffer Pro D13PRO pump comes with a 2-year manufacturer warranty.

For any questions, concerns, or technical support, please contact our professional technical support team:

• Email: service@airbankpump.com
• Availability: 7 days a week, 24 hours a day.