MoKo 700W Smoothie Blender User Manual

1. Important Safety Instructions

Please read all instructions carefully before using your MoKo 700W Smoothie Blender. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not immerse the motor base in water or other liquids. Clean only with a damp cloth.
• Close supervision is necessary when any appliance is used by or near children.
• Avoid contact with moving parts. Keep hands and utensils out of the blending cup while blending to prevent personal injury and damage to the blender.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Ensure the blade assembly is securely fastened to the cup and the cup is properly locked onto the motor base before operating.
• Do not blend hot liquids, as pressure buildup may cause the cup to burst, resulting in injury.
• Do not overfill the blending or grinding cups beyond the maximum fill line.

2. Package Contents

Verify that all items listed below are present in your package:

• 1 x Main Engine (Motor Base)
• 1 x Blend Base (Blade Assembly for blending)
• 1 x Grind Base (Blade Assembly for grinding)
• 1 x 600ml Blend Cup
• 1 x 50ml Grind Cup
• 2 x Lids (for storage)
• 1 x User Manual (this document)

3. Setup

3.1 Unpacking and Initial Cleaning

1. Carefully remove all components from the packaging.
2. Wash the blend cup, grind cup, blend base, and grind base with warm, soapy water. Rinse thoroughly and dry.
3. Wipe the main engine (motor base) with a damp cloth. Do not immerse the motor base in water.

3.2 Assembly

1. Place the main engine on a clean, dry, and stable surface.
2. Select either the blend cup or grind cup, depending on your task.
3. Attach the corresponding blade assembly (blend base for blend cup, grind base for grind cup) to the open end of the cup. Twist clockwise until it is securely tightened.
4. The blender is now ready for operation.

Figure 1: Components of the MoKo 700W Smoothie Blender. This image displays the main engine (motor base), the larger blending cup with its blade assembly, and the smaller grinding cup with its blade assembly, illustrating the modular design for different functions.

4. Operating Instructions

4.1 Blending Function (for Shakes and Smoothies)

1. Add your desired ingredients to the 600ml blend cup. Ensure that the total volume does not exceed the MAX fill line indicated on the cup.
2. Securely screw the blend base (blade assembly) onto the open end of the blend cup by twisting it clockwise until tight.
3. Invert the blend cup so the blade assembly faces downwards. Place it onto the main engine, aligning the tabs on the cup with the slots on the motor base.
4. Twist the blend cup clockwise to lock it into place on the motor base. You should feel it click securely.
5. Plug the blender into a standard AC120V electrical outlet.
6. To operate, press down firmly on the top of the blend cup. The blender will activate in a pulse motion. Release pressure to stop.
7. Blend until your desired consistency is achieved. For best results, use short pulses rather than continuous operation.
8. Once blending is complete, twist the blend cup counter-clockwise to unlock it from the motor base. Carefully lift the cup.
9. Unscrew the blend base and replace it with one of the provided lids for storage or immediate consumption.

4.2 Grinding Function (for Coffee Beans, Spices, etc.)

1. Add dry ingredients, such as coffee beans or spices, to the 50ml grind cup. Do not overfill.
2. Securely screw the grind base (blade assembly) onto the open end of the grind cup by twisting it clockwise until tight.
3. Invert the grind cup so the blade assembly faces downwards. Place it onto the main engine, aligning the tabs on the cup with the slots on the motor base.
4. Twist the grind cup clockwise to lock it into place on the motor base.
5. Plug the blender into a standard AC120V electrical outlet.
6. To operate, press down firmly on the top of the grind cup. The blender will activate in a pulse motion. Release pressure to stop.
7. Grind until your desired consistency is achieved. Monitor closely to avoid over-grinding.
8. Once grinding is complete, twist the grind cup counter-clockwise to unlock it from the motor base. Carefully lift the cup.
9. Unscrew the grind base and replace it with one of the provided lids for storage.

5. Maintenance and Cleaning

Proper cleaning and maintenance will ensure the longevity and optimal performance of your blender.

5.1 General Cleaning

1. Always unplug the blender before cleaning.
2. Motor Base: Wipe the exterior of the main engine with a damp cloth. Do not immerse the motor base in water or any other liquid.
3. Cups and Lids: Wash the blend cup, grind cup, and lids with warm, soapy water. Rinse thoroughly. These parts may also be top-rack dishwasher safe (refer to product markings for confirmation).
4. Blade Assemblies (Blend Base & Grind Base): Carefully wash the blade assemblies with warm, soapy water. Use a brush to clean around the blades. Caution: Blades are sharp. Handle with extreme care to avoid injury. Rinse thoroughly.
5. Ensure all parts are completely dry before reassembling or storing the blender.

5.2 Storage

Store the blender and its accessories in a clean, dry place, out of reach of children.

6. Troubleshooting

If you encounter any issues with your blender, please refer to the following common problems and solutions:

7. Specifications

• Model: P840034631661
• Rated Input Power: 700W
• Rated Voltage: AC120V
• Blade Material: 6 blades 304 stainless steel
• Maximum Capacity: 600ml (blend cup), 50ml (grind cup)
• Special Feature: Pulse Function
• Power Source: Corded Electric
• Manufacturer: MoKo

8. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your original product packaging. This card outlines the terms and conditions of your product's warranty.

Should you require technical support, have questions about product operation, or need assistance with service inquiries, please contact MoKo customer service. Contact information can typically be found on the product packaging or the official MoKo website.