1. Introduction
Thank you for purchasing the Klwenas Maec Queen Size Lift-Up Storage Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.
2. Safety Information
- Do not exceed the maximum weight capacity of 1000 lbs (453 kg).
- Exercise caution when operating the hydraulic lift system. Keep hands and fingers clear of moving parts.
- Ensure all parts are present and undamaged before assembly to prevent instability.
- If your package arrives in two boxes and parts are missing from both, please contact customer service immediately.
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your flooring.
3. Package Contents
Your bed frame is shipped in two separate boxes, which may arrive on different days. Please ensure you have received both packages before starting assembly.
The package includes:
- All necessary bed frame components (headboard, side rails, footboard, slats, hydraulic mechanism).
- Detailed assembly instructions.
- Required assembly tools.

Figure 1: Overview of the Klwenas Maec Queen Size Lift-Up Storage Bed.
4. Setup and Assembly
Assembly is required for this bed frame. No box spring is needed. Follow the step-by-step instructions provided in the included manual. It is recommended to lay out each board by its corresponding number before beginning assembly for a smoother process.
4.1. General Assembly Tips
- Identify all parts and hardware before starting.
- Assemble with at least two people for safety and ease.
- Do not fully tighten all screws until the entire frame is assembled.
4.2. Slats Installation
The bed frame features a Velcro slats design. This simplifies the installation of the slats and provides stability between the slats and the foundation, which helps eliminate friction noise.

Figure 2: Queen size bed dimensions and slat system. Note the recommended mattress thickness of 8"-12".
5. Operating Instructions
5.1. Hydraulic Lift Storage System
The bed frame is equipped with a hydraulic lift system, allowing you to effortlessly raise the mattress platform to access the spacious storage area underneath. To operate:
- Remove any pillows or loose items from the bed surface.
- Grasp the designated lifting point (usually at the foot of the bed).
- Gently lift the mattress platform upwards. The hydraulic mechanism will assist in raising and holding the platform in the open position.
- To close, gently push the platform downwards until it fully lowers and locks into place. Ensure no items are obstructing the closing mechanism.

Figure 3: The hydraulic lift mechanism allows easy access to the storage space.

Figure 4: The spacious under-bed storage area is ideal for bedding, clothes, or other essentials.
5.2. Adjustable Headboard Height
The velvet upholstered headboard features an adjustable height. During assembly, you can set the headboard to your preferred height within the range of 40.9" to 42.9" (103.9 cm to 108.9 cm) to accommodate different mattress thicknesses and personal preferences.

Figure 5: Detail of the velvet upholstered headboard with vintage rivet trim.
6. Maintenance
- Cleaning: For the velvet upholstery, gently vacuum with an upholstery attachment to remove dust. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Frame Care: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary to maintain stability and prevent squeaking.
- Hydraulic System: The hydraulic system is designed for long-term use and generally requires no maintenance. Avoid applying excessive force when lifting or lowering the platform.
7. Troubleshooting
- Squeaking Noises: Ensure all assembly hardware is securely tightened. The Velcro slat design is intended to minimize noise; however, loose connections can still cause squeaks.
- Difficulty Lifting/Lowering Hydraulic System: Ensure the mattress is correctly positioned and not excessively heavy. Check for any obstructions in the mechanism. If the issue persists, contact customer support.
- Missing Parts: If parts are missing from your shipment, especially if both boxes have arrived, please contact Klwenas Maec customer service immediately for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Size | Queen |
| Material | Solid wood + metal + velvet |
| Product Dimensions (L x W x H) | 82.6" x 62.2" x 42.9" (210 cm x 158 cm x 109 cm) |
| Style | Modern |
| Special Features | Lift-up Storage Bed, Adjustable Headboard, Vintage Rivets Trim, Velvet Upholstered, Hydraulic System, Noiseless, No Box Spring Needed |
| Included Components | Installation Manual |
| Brand Name | Klwenas Maec |
| Manufacturer | Klwenas Maec |
| UPC | 764725641855 |
| Manufacturer Part Number | bed-898 |
| Model Number | Upholstered platform bed |
| Required Assembly | Yes |
| Color | Grey |
| Finish Type | Velvet |
| Furniture Finish | Gray |
| Shape | Rectangular |
| Compatible Mattress Size | Queen (Recommended thickness: 8"-12") |
| Maximum Weight Recommendation | 1000 Pounds (453 kg) |
| Item Weight | 100 Pounds (45.3 kg) |
9. Warranty Information
For specific warranty details regarding your Klwenas Maec bed frame, please refer to the documentation included with your purchase or contact Klwenas Maec customer service directly. Warranty terms typically cover manufacturing defects under normal use.
10. Customer Support
If you have any questions, concerns, or require assistance with your Klwenas Maec Queen Size Lift-Up Storage Bed, please do not hesitate to contact our customer service team. We are committed to resolving your issues promptly, typically within 24 hours.
Please have your model number (Upholstered platform bed) and UPC (764725641855) available when contacting support to ensure efficient service.