Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller. Please read this manual thoroughly before use to ensure proper functionality and safety.
Safety Information
- Ensure the power supply voltage (DC12V-24V) matches the controller's requirements to prevent damage.
- Do not expose the controller to moisture or extreme temperatures.
- Disconnect power before making any connections or performing maintenance.
- This device is designed for indoor use only.
- Keep out of reach of children.
Package Contents
The package should contain the following items:
- 1 x CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller (Model: Tuya-mini-WIFI)
Note: LED light strips and power supply are sold separately.
Product Overview
The CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller allows you to control your RGB LED light strips wirelessly via the Tuya Smart Life APP.
Figure 1: Front view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, showing the main control unit, the DC input cable, and the 4-pin output connector for RGB LED strips. A separate 4-pin male header is also visible, likely for connecting to the LED strip.
Figure 2: Rear view of the CONTIA Tuya Smart Life WiFi RGB LED Light Strip Controller, illustrating the DC power input jack and the DC power output plug, along with the main control unit.
Key Features:
- WiFi 2.4GHz connectivity for smart control.
- Compatible with Tuya Smart Life APP.
- Supports DC12V-24V input voltage.
- Designed for RGB LED light strips.
- Compact mini design.
Specifications
| Product Name | WiFi Mini Strip Controller |
| Model | Tuya-mini-WIFI |
| Voltage | DC12V-24V |
| DC Diameter | 5.5*2.5 mm |
| Output | Max. 0-2A/channel |
| Control Signal | Wi-Fi 2.4GHz |
| Dimensions (L*W*H) | 64*24*12 mm |
| Working Temperature | -20°C to 60°C |
| Supported LED Types | RGB (also supports RGBW, RGBCCT variants) |
Setup
1. Wiring Connections
- Connect LED Strip: Connect your RGB LED light strip to the 4-pin output connector of the controller. Ensure the polarity (R, G, B, V+) matches correctly.
- Connect Power Supply: Connect a compatible DC12V-24V power supply (not included) to the DC input jack of the controller.
- Power On: Plug the power supply into a wall outlet. The LED strip should briefly light up, indicating power.
Important: Always ensure the power supply is disconnected before making or changing any wiring connections.
2. App Installation
- Download App: Search for "Tuya Smart" or "Smart Life" in your mobile device's app store (App Store for iOS, Google Play Store for Android) and download the application.
- Register/Login: Open the app and register for a new account or log in with an existing one.
3. Device Pairing
- Enter Pairing Mode: With the controller powered on, press and hold the button on the controller for approximately 5-10 seconds until the LED strip starts flashing rapidly. This indicates the controller is in pairing mode.
- Add Device in App: Open the Tuya Smart/Smart Life app. Tap the "+" icon in the top right corner to add a device.
- Select Device Type: Choose "Lighting" or "Light Source (Wi-Fi)" from the device list.
- Connect to Wi-Fi: Confirm that the LED strip is flashing rapidly. Enter your 2.4GHz Wi-Fi network name and password. (Note: 5GHz Wi-Fi networks are not supported.)
- Pairing: The app will begin searching for the device. Once found, the LED strip will stop flashing and remain steadily lit.
- Rename Device: After successful pairing, you can rename the controller for easier identification (e.g., "Living Room LED Strip").
Operating Instructions
1. Using the Tuya Smart / Smart Life App
Once the controller is paired with the app, you can access various control functions:
- Color Selection: Choose from a wide spectrum of colors using the color wheel or predefined color palettes.
- Brightness Adjustment: Adjust the intensity of the light from 0% to 100%.
- Scene Modes: Select from various dynamic scene modes (e.g., Party, Reading, Relax) or create custom scenes.
- Timer/Schedule: Set schedules for the LED strip to turn on/off or change modes at specific times.
- Group Control: If you have multiple Tuya-compatible devices, you can group them for simultaneous control.
- Voice Control: Integrate with voice assistants like Amazon Alexa or Google Assistant for hands-free control (requires additional setup within the app).
2. Manual Control (Button on Controller)
The physical button on the controller provides basic control:
- Single Press: Toggles the LED strip On/Off.
- Long Press (5-10 seconds): Enters pairing mode (LED strip flashes rapidly).
Maintenance
- Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the controller to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED strip does not light up. | No power; incorrect wiring; faulty LED strip. | Check power supply connection and outlet. Verify LED strip wiring polarity. Test with a different LED strip if possible. |
| Cannot pair with Tuya Smart / Smart Life app. | Controller not in pairing mode; incorrect Wi-Fi password; 5GHz Wi-Fi network; weak Wi-Fi signal. | Ensure LED strip is flashing rapidly. Double-check Wi-Fi password. Connect to a 2.4GHz Wi-Fi network. Move controller closer to the Wi-Fi router. |
| App control is unresponsive. | Poor Wi-Fi connection; app glitch. | Check Wi-Fi signal strength. Restart the app. Power cycle the controller (unplug and replug). |
| LED strip colors are incorrect. | Incorrect wiring polarity (R, G, B channels swapped). | Disconnect power and re-check the 4-pin connection between the controller and the LED strip, ensuring R, G, B, V+ align correctly. |
Warranty and Support
For warranty information or technical support, please refer to the retailer or manufacturer's official website where the product was purchased. Please have your purchase receipt and product model number (Tuya-mini-WIFI) available when contacting support.
