Introduction
Thank you for choosing the LEGAMI Erasable Gel Pen. This pen combines smooth writing with the convenience of erasable thermosensitive ink, allowing for clean corrections without a trace. Its unique Unicorn design adds a touch of fun to your writing experience. Please read this manual carefully to ensure proper use and care of your pen.
Product Overview
The LEGAMI Erasable Gel Pen features a 0.7 mm tip for precise writing and uses special thermosensitive ink that disappears with friction. The pen is designed for comfortable use and includes an integrated eraser.
Image: LEGAMI Erasable Gel Pen in Unicorn design. The pen is yellow and black striped with a unicorn head at the top, and the text "BEE DIFFERENT" along its barrel. It features a 0.7mm tip and pink thermosensitive ink.
Key Components:
- Pen Cap: Protects the pen tip when not in use.
- Gel Ink Cartridge: Contains thermosensitive pink ink.
- 0.7 mm Tip: Provides a smooth and consistent writing line.
- Integrated Eraser: Located at the end of the pen, designed to generate friction heat to erase the thermosensitive ink.
Setup and First Use
- Uncap the Pen: Gently pull off the protective cap from the writing end of the pen.
- Begin Writing: The pen is ready for immediate use. Write as you would with any standard gel pen.
Operating Instructions
Writing:
Hold the pen comfortably and apply light pressure to write on paper. The 0.7 mm tip delivers a smooth flow of pink thermosensitive gel ink.
Erasing:
- Locate the Eraser: The eraser is integrated into the top end of the pen, opposite the writing tip.
- Apply Friction: Use the eraser to rub over the ink you wish to remove. The friction generates heat, which causes the thermosensitive ink to become transparent and disappear.
- Clean Erasure: The eraser is designed not to leave rubber residue or damage the paper surface when used correctly.
Important Note: This eraser is specifically designed for LEGAMI thermosensitive ink. It will not effectively erase standard ballpoint or gel inks.
Maintenance
- Cap When Not in Use: Always replace the cap securely after use to prevent the ink from drying out and to protect the pen tip.
- Storage: Store the pen at room temperature.
- Avoid Extreme Temperatures:
- Heat: Exposure to high temperatures (e.g., direct sunlight, hot car interiors, near heaters) can cause the thermosensitive ink to disappear. If this occurs, placing the paper in a freezer for a short period (around -10°C or 14°F) may cause the ink to reappear.
- Cold: Exposure to very low temperatures can cause the ink to reappear if it was previously erased.
- Cleaning: Wipe the pen body with a soft, dry cloth if needed. Do not use harsh chemicals.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ink not visible after writing. | Paper or pen was exposed to high temperatures. | Place the paper in a freezer for a short period (approx. -10°C / 14°F) to make the ink reappear. |
| Ink not erasing. | Using the eraser on non-thermosensitive ink or insufficient friction. | Ensure you are erasing LEGAMI thermosensitive ink. Apply firm, consistent pressure with the integrated eraser. |
| Pen not writing smoothly. | Tip blockage or ink flow issue. | Try writing on a scrap piece of paper to clear the tip. Ensure the cap was on when not in use. |
Specifications
- Brand: Legami
- Model Number: AM6B47NLL5BX9
- Ink Color: Pink
- Tip Diameter: 0.7 mm
- Length: 15 cm
- Material: Plastic
- Closure: Click-Off Cap
- Grip Type: Ribbed
- Quantity: Pack of 2
Warranty and Support
For any questions, concerns, or support regarding your LEGAMI Erasable Gel Pen, please refer to the retailer's return policy or contact LEGAMI customer service directly. Specific warranty details may vary by region and retailer.