Dripex Electric Standing Desk User Manual

1. Introduction

Thank you for choosing the Dripex Electric Standing Desk. This desk is designed to enhance your workspace with its versatile height adjustment capabilities, allowing you to seamlessly switch between sitting and standing positions. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desk.

The desk features a quiet electric motor for smooth height transitions, a memory function to save your preferred heights, and a sturdy construction with an 80kg load capacity. Its ergonomic design aims to reduce physical strain and improve productivity during long working hours.

2. Safety Information

• Always ensure the desk is placed on a flat, stable surface.
• Keep children and pets away from the desk during operation to prevent accidents.
• Do not overload the desk. The maximum load capacity is approximately 80kg.
• Ensure all cables are properly managed and secured to avoid entanglement or damage during height adjustments.
• Do not attempt to disassemble or repair the motor or control unit yourself. Contact customer support for assistance.
• Unplug the desk from the power outlet before cleaning or performing any maintenance.

3. Parts List

Before assembly, please verify that all parts are present and undamaged. Refer to the assembly video for visual guidance.

• Tabletop (2 pieces)
• Desk Legs (2)
• Frame Components (Crossbar, Side Brackets)
• Electric Motor and Control Unit
• Power Adapter and Cable
• Controller Panel
• Headphone Hook
• Cup Holder
• Assembly Hardware (Bolts, Hex Wrenches, Screws)
• Cable Management Clips
• Cable Hole Caps

4. Assembly Instructions

Assembly typically takes about 30 minutes with two adults. A Phillips screwdriver is required (not included). Ensure you have ample space for assembly.

Step-by-Step Assembly:

1. Assemble the Frame: Connect the desk legs to the main frame using the provided bolts and hex wrenches. Ensure all connections are secure.

Image: Illustration of the desk frame components and their assembly points.
2. Install Controller and Rods: Insert the controller set into the lifting legs and secure the connectors on both sides with bolts.
3. Attach Tabletop Fixing Arms: Secure the tabletop fixing arms to both ends of the frame.
4. Flip and Attach Legs: Carefully flip the assembled frame. Attach the leg bases to the legs.
5. Mount Tabletop: Place the assembled desk frame onto the tabletop and secure it with screws. Ensure all bolts and adjusters are tightened firmly.


Image: Overhead view showing the two-piece tabletop and frame dimensions (approx. 140cm width, 60cm depth, height adjustable from 71cm to 117cm).

6. Cable Management and Accessories: Use the cable management clips to neatly secure the power cord to the underside of the tabletop. Do not attach cables to movable parts of the legs. Finally, attach the storage hooks (headphone hook, cup holder) and cable hole caps to the tabletop as desired.


Image: Close-up of the included headphone hook and cup holder, which can be attached to the desk for convenient storage.

5. Operating Instructions

Height Adjustment:

The desk features an electric motor for smooth and quiet height adjustments, ranging from approximately 72cm to 117cm.

Image: Visual representation of the desk being used in both standing and sitting positions, highlighting ergonomic benefits.

• Up/Down Buttons: Use the up (▲) and down (▼) arrow buttons on the control panel to manually adjust the desk height to your desired level.
• Memory Function: The control panel includes memory buttons to save your preferred sitting and standing heights. To set a memory position:
1. Adjust the desk to the desired height.
2. Press and hold one of the memory buttons (e.g., '1' for sitting, '2' for standing) until you hear a beep or the display confirms the setting.
• Recall Memory Position: Press the corresponding memory button to automatically move the desk to the saved height.
• Reset Button: If the desk encounters an error or needs to be recalibrated, press and hold the 'RESET' button until the desk moves to its lowest position and resets.

Image: Close-up of the desk's control panel, showing the up/down arrows, memory buttons, and reset button for height adjustment.

6. Maintenance

• Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
• Cable Care: Ensure cables are not pinched or tangled, especially during height adjustments.

7. Troubleshooting

If you encounter any issues, please refer to the following common troubleshooting steps:

• Desk not moving: Check if the power cable is securely plugged into both the desk and the wall outlet. Try pressing the 'RESET' button.
• Uneven height adjustment: Perform a reset by pressing and holding the 'RESET' button until the desk reaches its lowest point and recalibrates.
• Unusual noises: Ensure no objects are obstructing the lifting mechanism. If the noise persists, contact customer support.
• Control panel unresponsive: Unplug the desk for 30 seconds, then plug it back in. If the issue continues, contact support.

For issues not covered here, please contact Dripex customer support.

8. Specifications

Image: The desk demonstrating its robust 80kg load capacity, capable of supporting multiple monitors and office equipment.

9. Warranty and Support

Dripex offers a warranty period of 1 to 3 years from the date of purchase, with the exact duration varying by component. For any product inquiries, technical support, or warranty claims, please contact the seller, BayTech JP Supplies, through your purchase platform.

For further assistance, you may also refer to the official Dripex website or contact their customer service directly if available.