Fisher-Price Iris 4-in-1 Convertible Full-Size Baby Crib

Introduction

This manual provides essential instructions for the assembly, operation, maintenance, and care of your Fisher-Price Iris 4-in-1 Convertible Full-Size Baby Crib. Designed to adapt to your child's growth, this crib transitions from a standard crib to a daybed, and then to two stages of toddler beds. It is crafted from sustainably sourced New Zealand pinewood and meets stringent safety standards, including GREENGUARD Gold and JPMA certifications.

Safety Information

Your child's safety is paramount. Please read and follow all instructions carefully before assembly and use. Keep this manual for future reference.

• Compliance: This crib meets or exceeds ASTM and CPSC safety standards. It is GREENGUARD Gold Certified for low chemical emissions and Baby Safety Alliance Verified, ensuring CPSIA compliance with lead and phthalate levels below federal limits.
• Assembly: Ensure all parts are correctly assembled and tightened. Do not use the crib if any parts are missing, damaged, or broken.
• Mattress: Use only a full-size, Greenguard Gold Certified mattress that fits snugly, leaving no gaps larger than 1/2 inch (13 mm) between the mattress and the crib sides.
• Suffocation Hazard: Infants can suffocate on soft bedding. Never place pillows, quilts, or soft objects under an infant in the crib.
• Strangulation Hazard: Strings and cords can cause strangulation. Keep cords, blinds, and drapes away from the crib. Do not suspend toys or items with strings over the crib.
• Fall Hazard: When a child is able to climb out, or reaches 35 inches (89 cm) in height, the crib should no longer be used.

Parts List

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Dream On Me customer service.

• Assembly Instruction Manual
• Hardware Pack
• Guard Rail (2 included for Toddler Bed 1 conversion)
• Crib Side Panels
• Crib End Panels
• Mattress Support Frame

Note: Additional guard rails for Toddler Bed 2 conversion are sold separately.

Assembly Instructions

Assembly requires two adults. Clear a spacious area for assembly and keep all hardware out of reach of children. Refer to the included detailed 'Assembly Instruction' booklet for step-by-step diagrams and specific hardware usage.

1. Unpack all components and verify against the parts list.
2. Attach the crib end panels to the side panels using the provided hardware.
3. Install the mattress support frame at the desired height. Ensure it is securely fastened.
4. Double-check all connections to ensure they are tight and secure.

Operating Instructions

Adjustable Mattress Height

The crib features three adjustable mattress height settings to accommodate your child's developmental stages. The highest setting is for newborns, making it easier to reach your baby. Lower the mattress as your child grows and becomes more active, especially when they can sit up or stand.

Crib Mode

This is the primary configuration for infants. Ensure the mattress support is at an appropriate height for your child's age and mobility. Always use a firm, properly fitting crib mattress.

Daybed Mode

To convert to a daybed, remove one of the long side rails. This configuration is suitable for older infants and toddlers who can safely enter and exit the bed independently. Ensure the mattress is at the lowest setting.

Toddler Bed Mode (with 2 Guard Rails)

For this conversion, remove one long side rail and attach the two included guard rails to provide a safe sleeping environment while allowing the child to get in and out independently. The mattress should be at the lowest setting.

Toddler Bed Mode (with 4 Guard Rails)

This configuration provides additional security for active toddlers. It requires the two guard rails included with the crib, plus an additional two guard rails (sold separately). Attach all four guard rails to the bed frame. Ensure the mattress is at the lowest setting.

Maintenance and Care

To maintain the quality and appearance of your crib, regularly wipe surfaces with a damp cloth, followed by a dry cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish. Periodically check all hardware for tightness and re-tighten as necessary. The crib is constructed from durable pine wood.

Troubleshooting

If you encounter any issues with your Fisher-Price Iris crib, please refer to the following common solutions:

• Wobbly Frame: Check all bolts and screws. Re-tighten any loose connections. Ensure the crib is on a level surface.
• Missing Parts: If any parts were missing upon delivery, contact Dream On Me customer service immediately with your product model number and purchase information.
• Difficulty with Conversion: Review the specific conversion steps in the 'Assembly Instruction' manual. Ensure all necessary hardware is used and correctly installed for each configuration.
• Damaged Components: Do not use the crib if any part is damaged. Contact customer service for replacement parts.

Specifications

Warranty and Support

The Fisher-Price Iris 4-in-1 Convertible Full-Size Baby Crib is backed by a 1-year limited manufacturer's warranty. This warranty covers defects in material and workmanship under normal use. For warranty claims, missing parts, or any product-related inquiries, please contact Dream On Me customer service directly.

Manufacturer: Dream On Me

Please have your model number (782FP-WVOAK) and proof of purchase available when contacting support.