Livoo DOM483 Cordless Steam Iron User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your Livoo DOM483 Cordless Steam Iron. Please read all instructions carefully before first use and retain this manual for future reference. This appliance is designed for domestic use only.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury.

• Always ensure the voltage on the rating label corresponds to your mains voltage.
• Do not immerse the iron, charging base, or cord in water or other liquids.
• Unplug the iron from the power outlet when filling with water, emptying, or when not in use.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Keep the iron and its cord out of reach of children.
• The iron must be used and rested on a stable, heat-resistant surface.
• Never leave the iron unattended while it is switched on or connected to the mains.
• Do not touch hot surfaces. Use handles or knobs.
• Use the iron only for its intended purpose.

Product Overview

Familiarize yourself with the components of your Livoo DOM483 Cordless Steam Iron.

• Water Spray Nozzle
• Water Filling Inlet (with cover)
• Steam Control Selector
• Spray Button
• Steam Shot Button
• Handle
• Temperature Control Dial
• Power Indicator Light
• Ceramic Soleplate
• Charging Base
• Power Cord

Setup

Unpacking

Carefully remove the iron and all accessories from the packaging. Dispose of all packaging materials responsibly. Ensure all components are present and undamaged.

First Use

Before using the iron for the first time, remove any protective film or stickers from the soleplate. It is normal for a slight odor or smoke to be emitted during the first few minutes of operation as manufacturing residues burn off. This is harmless and will cease after a short period.

Filling the Water Tank

Always unplug the iron from the power outlet before filling the water tank. Use the provided water cup for accurate filling.

1. Ensure the steam control selector is set to the 'Dry Ironing' position (no steam).
2. Open the water filling inlet cover.
3. Hold the iron horizontally and slowly pour water into the tank using the measuring cup, being careful not to exceed the 'MAX' fill line. The tank capacity is 350 ml.
4. Close the water filling inlet cover securely.

Operating Instructions

Corded or Cordless Operation

The Livoo DOM483 iron offers flexibility with both corded and cordless use.

• Corded Use: Keep the iron attached to its charging base, which remains plugged into the power outlet. This provides continuous power for longer ironing sessions.
• Cordless Use: Place the iron on its charging base to heat up. Once the indicator light shows it's ready, lift the iron from the base for cordless ironing. Return it to the base periodically (e.g., when adjusting garments) to maintain temperature.

Temperature Adjustment

Select the appropriate temperature for your fabric type using the temperature control dial. Refer to the garment's care label for guidance. Always start with lower temperatures for delicate fabrics and increase as needed.

Steam Settings

The iron features variable steam output from 0 to 30 g/min, a spray function, and a powerful 120 g/min steam shot.

• Dry Ironing: Set the steam control selector to the 'Dry Ironing' position. This is suitable for delicate fabrics or when no steam is desired.
• Continuous Steam: For steam ironing, ensure the water tank is filled and the iron is heated to the appropriate temperature (usually indicated by the temperature dial's steam zone). Adjust the steam control selector to the desired steam level (0-30 g/min).
• Steam Shot (Pressing): Press the steam shot button for an extra burst of steam (120 g/min) to remove stubborn wrinkles. Wait a few seconds between shots to allow the iron to reheat.
• Spray Function: Press the spray button to lightly moisten fabrics, which can help in smoothing out wrinkles.

Ironing Tips

• Sort garments by fabric type and iron those requiring lower temperatures first.
• For best results, iron fabrics while they are slightly damp.
• Always check garment care labels for specific ironing instructions.

Maintenance

Self-Cleaning Function

The self-cleaning function helps remove mineral deposits and impurities from the steam chamber, prolonging the life of your iron.

1. Fill the water tank to the 'MAX' line.
2. Set the steam control to 'Dry Ironing' and the temperature dial to 'MAX'.
3. Plug in the iron and allow it to heat up until the indicator light turns off.
4. Unplug the iron. Hold it horizontally over a sink.
5. Press and hold the self-clean button (if available, or refer to specific instructions for your model's self-clean mechanism). Hot water and steam will be expelled from the soleplate, carrying impurities.
6. Release the button when the water tank is empty.
7. Reheat the iron and iron an old cloth to dry the soleplate.

Anti-Drip System

The anti-drip system prevents water from dripping from the soleplate when the iron's temperature is too low for steam production. If you notice dripping, ensure the iron has reached the correct temperature for steam ironing.

Emptying and Storage

After each use, unplug the iron and allow it to cool completely. Empty any remaining water from the tank. Store the iron upright on its charging base in a safe, dry place.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Livoo customer service through their official website or contact channels. Please have your model number (DOM483) and proof of purchase available.