Avallon ARHW36PAA 36 Inch Wall Mounted Range Hood User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Avallon ARHW36PAA 36 Inch Wall Mounted Range Hood. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Image 1.1: Front view of the Avallon ARHW36PAA 36 Inch Wall Mounted Range Hood in stainless steel.

The Avallon ARHW36PAA is designed to efficiently remove smoke, grease, odors, and moisture from your cooking area, providing a cleaner and more comfortable kitchen environment. It features a powerful blower, durable baffle filters, and convenient LED lighting.

2. Important Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:

• Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
• Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
• When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
• Ducted fans must always be vented to the outdoors.
• Do not use this unit with any solid-state speed control device.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

CAUTION:

• For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
• To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.
• Your range hood motor has a thermal overload which will automatically shut off the motor if it becomes overheated. The motor will restart when it cools down. If the motor continues to shut off and restart, have the hood serviced.

3. Package Contents

Carefully unpack your range hood and verify that all components are present and undamaged. If any items are missing or damaged, please contact customer support immediately.

• Avallon ARHW36PAA Range Hood Unit
• LED Lights (pre-installed)
• Baffle Filters (pre-installed)
• Knob Controls (pre-installed)
• Mounting Hardware (screws, anchors, etc.)
• Ducting Adapter (if applicable)
• User Manual

4. Specifications

5. Setup and Installation

Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified professional.

5.1 Before You Begin

• Read the entire manual before starting installation.
• Ensure you have all necessary tools and materials.
• Turn off power at the circuit breaker before beginning any electrical work.
• Determine the desired mounting height above your cooking surface. Consult local building codes for minimum clearance requirements.

5.2 Wall Mounting

1. Mark the mounting points on the wall according to the hood's dimensions and desired height. Use a level to ensure accuracy.
2. Drill pilot holes for the mounting screws. If mounting into drywall, use appropriate wall anchors.
3. Secure the mounting bracket to the wall.
4. Carefully lift the range hood and hang it onto the mounting bracket. Ensure it is securely seated.
5. Install any additional securing screws as indicated in the installation guide provided with the product.

Image 5.1: The Avallon ARHW36PAA range hood seamlessly integrated into a modern kitchen setting.

5.3 Ducting Options

The ARHW36PAA is designed for ducted ventilation, expelling air to the outdoors. It can also be converted for ductless (recirculating) operation with the purchase of an optional recirculation kit (charcoal filters). For ducted installation:

1. Connect the appropriate ductwork (not included) to the exhaust outlet of the range hood. Ensure all connections are sealed with duct tape or clamps to prevent air leaks.
2. Route the ductwork to the exterior of your home, ensuring the shortest and straightest path possible for optimal airflow.
3. Install a wall cap or roof cap with a damper at the exterior termination point.

5.4 Electrical Connection

Connect the range hood to a dedicated 120V, 60Hz, AC-only electrical supply circuit. Ensure wiring is done by a qualified electrician and complies with all local codes and ordinances.

6. Operating Instructions

The Avallon ARHW36PAA range hood features intuitive knob controls for fan speed and lighting.

Image 6.1: Underside view highlighting the knob controls and baffle filters.

6.1 Fan Speed Control

The range hood offers 4 fan speeds, allowing you to adjust the ventilation power based on your cooking needs. The blower outputs up to 600 CFM to effectively remove cooking fumes and odors.

• Locate the fan speed control knob.
• Turn the knob clockwise to increase the fan speed from 1 (low) to 4 (high).
• Turn the knob counter-clockwise to decrease the fan speed or turn the fan off.

6.2 LED Lighting

The integrated LED lighting illuminates your cooking area, providing clear visibility.

• Locate the light control knob.
• Turn the knob to switch the lights ON or OFF.

Image 6.2: Close-up view of the energy-efficient LED lights.

7. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your range hood.

7.1 Cleaning Baffle Filters

The stainless steel baffle filters effectively trap grease and are dishwasher safe for stress-free maintenance. Clean them regularly, depending on your cooking habits (e.g., monthly).

1. Turn off the range hood and ensure the lights are cool.
2. Locate the release latches or handles on the baffle filters.
3. Pull the latch/handle and carefully remove the filters.
4. Wash the filters in a dishwasher or by hand using hot water and a non-abrasive detergent.
5. Allow filters to dry completely before reinstalling.
6. Reinsert the filters, ensuring they click securely into place.

Image 7.1: Detail of the removable stainless steel baffle filters.

7.2 Exterior Cleaning

Clean the exterior surfaces of the range hood regularly with a soft cloth and a mild, non-abrasive cleaner specifically designed for stainless steel. Do not use abrasive pads or cleaners that could scratch the surface.

7.3 LED Light Replacement

LED lights are designed for long life and typically do not require frequent replacement. If a light needs replacement, consult a qualified technician or contact Avallon customer support for assistance.

8. Troubleshooting

Before contacting customer service, please refer to the following table for common issues and their solutions.

9. Warranty and Customer Support

Avallon products are manufactured to the highest quality standards and are backed by a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.

For technical assistance, parts, or warranty claims, please contact Avallon customer support. When contacting support, please have your model number (ARHW36PAA) and purchase date readily available.

Avallon Customer Support:
Please visit the official Avallon website or refer to your purchase documentation for contact information.