Introduction
The Firstech FT-CMX-HC is a next-generation hardware module designed for flexible integration into vehicle security and remote start systems. It supports configurations for security, remote start, or a combined system. Featuring an upgraded 32-bit ARM processor and 256kb flash storage, the CMX offers enhanced programmability, event tracking, and operational speed. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your FT-CMX-HC system.
Setup and Installation
The FT-CMX-HC module is designed for professional installation due to its integration with vehicle electrical systems. It is compatible with various Firstech accessories for universal applications.
Key Components for Installation:
- Blade Ready: The system is "Blade Ready," indicating compatibility with Blade bypass modules for vehicle integration.
- FTI T-Harnesses: For remote start applications, FTI T-Harnesses are supported to simplify installation.
- ALARMIT: For enhanced security features, the ALARMIT accessory can be integrated.
- Compatible Devices: The system is compatible with Firstech remote kits, Firstech accessories, and DroneMobile.
Image: The FT-CMX-HC module shown with its retail packaging, highlighting its "Blade Ready" and "Universal Remote" capabilities.
Wiring and Connections:
The FT-CMX-HC utilizes wired connectivity. Ensure all connections are secure and follow the specific wiring diagrams provided with your installation kit. The system requires a corded electric power source.
Image: A multi-colored wiring harness, typically used for connecting the FT-CMX-HC module to the vehicle's electrical system.
Image: A vehicle hood pin switch, a common component for alarm systems to detect unauthorized hood opening.
Operating Instructions
The FT-CMX-HC system is controlled primarily via a remote. Specific operational procedures will depend on the Firstech remote kit paired with your module and any integrated DroneMobile services.
Remote Start Functionality:
- Refer to your specific Firstech remote's user guide for detailed instructions on initiating remote start sequences.
- Ensure the vehicle is in a safe, parked position before attempting remote start.
Alarm System Functionality:
- The system features a "Motion Only" alert type, detecting movement or impact.
- Arming and disarming procedures are typically performed using the paired Firstech remote.
- For advanced security features and notifications, integrate with DroneMobile services.
Image: A close-up view of the Firstech FT-CMX-HC module, showing its compact design and connection ports.
Maintenance and Care
The FT-CMX-HC module is designed for durability and requires minimal maintenance.
- Cleaning: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners directly on the unit.
- Power Source: The unit operates on corded electric power and does not require internal batteries.
- Environmental Conditions: Ensure the module is installed in a location protected from extreme temperatures and moisture, as per professional installation guidelines.
Troubleshooting
If you encounter issues with your FT-CMX-HC system, consider the following common troubleshooting steps:
- System Not Responding:
- Verify all power connections are secure.
- Check the vehicle's battery voltage.
- Ensure the paired remote control has functional batteries.
- Remote Start Failure:
- Confirm the vehicle is in a proper state for remote start (e.g., doors closed, hood closed, transmission in park).
- Check for any active diagnostic trouble codes in the vehicle.
- Alarm Malfunctions:
- Ensure all sensors (e.g., hood pin switch) are correctly installed and functioning.
- Check for any loose wiring or damaged components.
- Reprogramming Requirement:
In some cases, the module may require reprogramming, especially after vehicle battery disconnections or system updates. This typically requires specialized tools and knowledge, and it is recommended to contact a certified Firstech installer for assistance.
For persistent issues, consult a professional installer or Firstech technical support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Firstech |
| Model Number | FT-CMX-HC |
| Color | Black |
| Power Source | Corded Electric |
| Compatible Devices | Firstech remote kits, Firstech accessories, DroneMobile |
| Item Dimensions (L x W x H) | 6.5 x 5.5 x 2 inches |
| Connectivity Technology | Wired |
| Alert Type | Motion Only |
| Item Weight | 1 pound (16 Ounces) |
| Control Method | Remote |
| Recommended Uses | Home Security (Note: Product is primarily for vehicle security/remote start) |
| UPC | 840127700601 |
| Manufacturer | Firstech |
| Batteries Required? | No |
Note: The "Recommended Uses For Product: Home Security" specification appears to be a general categorization and may not fully reflect the primary automotive application of this device.
Warranty and Support
For warranty information and technical support, please contact Firstech directly or refer to their official website. Professional installation is highly recommended for this product, and installers can often provide direct support for installation-related queries.
Manufacturer: Firstech
