1. Introduction
Thank you for choosing the PHI VILLA 8-Piece Patio Dining Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before use and retain them for future reference.
This set includes one metal dining table, six outdoor swivel dining chairs, and one 13ft double-sided patio umbrella.
2. Important Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Always assemble according to the instructions provided.
- Do not exceed the chair load weight of 300 lbs (approximately 136 kg).
- Be cautious with the umbrella, especially in windy conditions, to prevent tip-overs. It is recommended to close the umbrella during strong winds or when unattended.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Do not stand on chairs or tables.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Metal Dining Table (59"L x 35.4"W x 28.7"H)
- 6 x Outdoor Swivel Dining Chairs (19.5"W x 20"D x 40"H)
- 1 x 13ft Double-sided Patio Umbrella (Navy Blue)
- Assembly Hardware Kit
- Instruction Manual
4. Assembly Instructions
Assembly is required for the dining table, chairs, and umbrella. Detailed step-by-step instructions and all necessary accessories are included in the packaging. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.
4.1. Chair Assembly
Each chair requires assembly of the seat, backrest, and swivel base. Follow the diagrams and instructions provided in the chair-specific manual. Ensure all bolts are tightened securely for stability and safe rocking/swivel function.
4.2. Dining Table Assembly
Assemble the table legs to the tabletop. The table features an E-coating for weather resistance. Ensure the umbrella hole is clear if you plan to use the umbrella.
4.3. Umbrella Setup
Insert the umbrella pole into the table's umbrella hole. Note that an umbrella base is not included and is required for stability. Use the built-in crank mechanism to open and close the umbrella canopy.
Image: The complete PHI VILLA 8-Piece Patio Dining Set, showcasing the table, six chairs, and the navy blue umbrella in an outdoor setting.
5. Operating Instructions
5.1. Swivel and Rocking Chairs
The outdoor dining chairs are designed with a 360-degree swivel function and a gentle rocking motion. To use, simply sit in the chair and apply slight pressure to initiate the rocking or swivel movement. Ensure the chair is on a flat, stable surface for optimal performance.
Image: A detailed view of the chair's base, illustrating its 15-degree rocking and 360-degree swivel features.
5.2. Patio Dining Table
The metal dining table provides a stable surface for outdoor meals. It includes a 1.57-inch umbrella hole in the center, allowing for the integration of the provided patio umbrella or other compatible umbrellas. Ensure the umbrella is properly secured with a suitable base (not included).
Image: The E-coating metal dining table, showing its surface and the integrated umbrella hole.
5.3. 13ft Patio Umbrella
The 13ft double-sided umbrella offers extensive shade. To open, rotate the crank handle clockwise until the canopy is fully extended. To close, rotate the crank handle counter-clockwise. Always ensure the umbrella is fully closed and secured when not in use or during adverse weather conditions.
Image: The 13ft patio umbrella, demonstrating its large coverage for outdoor use.
6. Maintenance
Proper care will extend the life and appearance of your patio dining set.
- Cleaning: Wipe all surfaces with a dry cloth. For more stubborn dirt, use a mild soap and water solution, then rinse thoroughly and dry immediately to prevent water spots or rust.
- Fabric Care: The Textilene fabric on the chairs is designed to be breathable, easy-to-clean, and quick-drying. For general cleaning, wipe with a damp cloth. Avoid harsh chemicals that may damage the fabric.
- Metal Frame Care: The metal components feature an E-coating for rust resistance. Inspect the frame periodically for any signs of wear or rust. Touch up any scratches with appropriate outdoor furniture paint to prevent further corrosion.
- Storage: During off-season or prolonged periods of non-use, it is recommended to store the furniture in a dry, protected area or cover it with weather-resistant furniture covers.
7. Troubleshooting
This section addresses common issues you might encounter.
- Wobbly Chairs/Table: Ensure all assembly bolts and screws are fully tightened. Check that the furniture is placed on a level surface.
- Umbrella Instability: The umbrella requires a separate base (not included) for stability. Ensure the base is heavy enough for the umbrella size and that the umbrella pole is securely fastened within the table and base. Always close the umbrella in windy conditions.
- Difficulty with Swivel/Rocking: Check for any obstructions around the chair base. Ensure the chair is assembled correctly and all components are aligned.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | PHI VILLA |
| Model | B0CS3GTTHL |
| Material | Metal, Textilene |
| Table Dimensions | 59"L x 35.4"W x 28.7"H |
| Table Umbrella Hole | 1.57" Diameter |
| Chair Dimensions | 19.5"W x 20"D x 40"H |
| Chair Weight Capacity | 300 lbs |
| Umbrella Dimensions | 13(L) x 6.5(W) x 7.8(H) Feet |
| Umbrella Pole Diameter | 1.57" |
| Color | Navy Blue Umbrella, Blue Fabric Chairs |
| Product Care Instructions | Wipe with Dry Cloth |
Image: Dimensional drawing illustrating the measurements of the table, chairs, and umbrella.
9. Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or contact PHI VILLA customer service directly. Keep your purchase receipt for warranty claims.
