Bearhug SQB-Q
Contents
Bearhug Electric Heated Blanket (Queen Size 84"x 90", Taupe) - User Manual
Model: SQB-Q
1. Introduction
Thank you for choosing the Bearhug Electric Heated Blanket. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new heated blanket. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: Bearhug Electric Heated Blanket, Queen Size, Taupe
2. Important Safety Information
WARNING: To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions.
- Always ensure the blanket is connected to the correct voltage: 120V/60Hz.
- Avoid prolonged use on one body area to prevent localized overheating.
- Do not use with other heating products (e.g., another electric blanket, heating pad).
- Do not use if the blanket is wet.
- Do not use for infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use if the blanket is folded, bunched, or creased.
- Do not insert pins or other metallic objects into the blanket.
- Always unplug the blanket when not in use.
- Keep the control unit away from open windows or direct sunlight.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Figure 2: Visual guide for safety essentials, including voltage, avoiding prolonged use, and preventing overlapping with other heating products.
3. Package Contents
Your Bearhug Electric Heated Blanket package should include:
- 1 x Bearhug Electric Heated Blanket (Queen Size 84"x 90")
- 2 x Dual Controllers with attached power cords
4. Setup Instructions
- Unpack the Blanket: Carefully remove the blanket and controllers from the packaging.
- Lay Flat: Spread the heated blanket evenly on your bed. Ensure there are no folds, creases, or bunched areas. The blanket is reversible, featuring faux fur on one side and sherpa on the other.
- Connect Controllers: Locate the connection ports on the blanket. Plug each dual controller's connector firmly into its respective port on the blanket. Ensure a secure connection.
- Plug into Power Outlet: Plug the power cords from the controllers into a 120V/60Hz wall outlet. Avoid using extension cords if possible. Ensure the cords are not pinched or trapped.

Figure 3: The blanket features a soft faux fur (velvet) side and a cozy sherpa side, offering reversible comfort.
5. Operating Instructions
Your Bearhug Electric Heated Blanket features dual controllers, allowing independent temperature and timer settings for each side of the blanket.
- Power On/Off: Press the power button (U) on each controller to turn the blanket on or off for that side. The display will illuminate.
- Adjust Heat Level: Use the 'TEMP +' or 'TEMP -' buttons to select your desired heat level. There are 10 heating levels, ranging from approximately 90°F to 108°F. Start with a lower setting and adjust as needed for comfort.
- Set Auto-Off Timer: Use the 'TIMER +' or 'TIMER -' buttons to set the automatic shut-off timer. You can choose a duration from 0.5 hours to 12 hours. The blanket will automatically turn off after the set time has elapsed.
- Pre-heating: For optimal warmth, turn on the blanket to your desired heat setting 15-30 minutes before use.

Figure 4: The dual controllers allow independent adjustment of 10 heat levels and a 0.5-12 hour auto-off timer for each side of the blanket.
6. Care and Maintenance
Proper care ensures the longevity and performance of your heated blanket.
- Disconnect Before Cleaning: Always disconnect the power cords from the blanket and unplug from the wall outlet before cleaning.
- Machine Washable: The blanket is machine washable. Use a gentle cycle with cold water (max 104°F / 40°C).
- Do Not Dry Clean: Do not dry clean, as cleaning solvents may damage the insulation of the heating elements.
- Do Not Bleach: Do not use bleach or other harsh chemicals.
- Tumble Dry: Tumble dry on low heat or line dry. Ensure the blanket is completely dry before reconnecting to power.
- Do Not Iron: Do not iron the blanket.
- Storage: When not in use, store the blanket loosely folded in a cool, dry place. Avoid tightly folding or creasing the blanket, which can damage the internal wiring.

Figure 5: The electric blanket is machine washable. Remember to disconnect the cord, wash with a gentle cycle in cold water, and do not dry clean or bleach.
7. Troubleshooting
If you experience issues with your Bearhug Electric Heated Blanket, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Power cord not securely plugged in; Controller not turned on; Timer expired; Overheat protection activated. | Ensure all connections are secure. Press the power button on the controller. Reset the timer if needed. Unplug the blanket for 30 minutes, then plug back in to reset overheat protection. |
| Controller display not working | Power cord not plugged in; Controller malfunction. | Check power connections. If the issue persists, contact customer support. |
| Uneven heating | Blanket is folded, bunched, or creased. | Lay the blanket flat and smooth out any folds or creases. Ensure no heavy objects are on the blanket. |
If the problem persists after trying these solutions, please contact Bearhug customer service for assistance.
8. Product Specifications
- Model Name: SQB
- Item Model Number: SQB-Q
- Size: Queen 84"x 90" (Product Dimensions: 83.86"L x 89.76"W)
- Color: Taupe
- Material: Faux Fur, Sherpa (Fabric Type: Velvet & Sherpa)
- Fill Material: Synthetic Fiber Blend
- Heat Settings: 10 Levels (approx. 90°F to 108°F)
- Auto-Off Timer: 0.5 - 12 Hours
- Safety Features: Overheat Protection, ETL Certified
- Special Features: Corded Electric, Reversible, Skin Friendly
- Power: 120V/60Hz
- Item Weight: 8.42 pounds
- Care Instructions: Machine Washable

Figure 6: The blanket is ETL certified, ensuring safety with fast heating and overheat protection features.
9. Warranty and Customer Support
Bearhug offers a 5-year limited warranty against quality problems. If you encounter any quality issues within this period, please contact our customer service team. We provide 24/7 online customer service to assist you with any questions or concerns.
For support, please visit the official Bearhug store on Amazon: Bearhug Store

Figure 7: Bearhug offers comprehensive customer service, including a 5-year warranty and 24-hour online support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.