GODOX TT560II

Download PDF
Contents

GODOX TT560II Universal On-Camera Flash Instruction Manual

Introduction

This manual provides detailed instructions for the GODOX TT560II Universal On-Camera Flash with 2.4G Wireless Trigger. Please read this manual carefully before use to ensure proper operation and optimal performance. This flash unit is designed for use with various DSLR cameras including Canon, Sony, Nikon, Panasonic, Olympus, and Pentax, featuring a standard hot shoe mount.

Product Overview

The GODOX TT560II is a versatile on-camera flash speedlite offering a powerful GN38 (ISO 100, 105mm) output and flexible flash modes. It includes a 2.4G wireless trigger for off-camera control.

Key Features:

  • Wireless Transmission: Integrated 2.4G wireless trigger for remote flash control.
  • Powerful Output: Guide Number 38 (ISO 100, 105mm) for ample illumination.
  • Versatile Flash Modes: Supports M (Manual), S1 (Optical Slave), and S2 (Pre-flash Cancel Slave) modes.
  • Adjustable Power: 8 levels of brightness control (1/128 to 1/1).
  • Flexible Head: Vertical rotation from 0-90 degrees and horizontal rotation from 0-270 degrees.
  • Wide Compatibility: Compatible with standard hot shoe DSLR cameras from Canon, Sony, Nikon, Panasonic, Olympus, and Pentax.
  • Power Saving: Designed with features to conserve battery life.
  • Fast Recycling: Approximately 0.1-5 seconds recycling time (with AA alkaline batteries).

Components:

Diagram showing labeled components of the GODOX TT560II flash, including flash head, hot shoe, lock ring, battery compartment, power switch, mode selection button, output level indicator, flash power level button, motion selection, test button, built-in panel, and optic control sensor.
The GODOX TT560II flash unit features a flash head, hot shoe, lock ring, battery compartment, power switch, mode selection button (M, S1, S2), output level indicator, flash power level buttons (+/-), motion selection, test button, built-in panel, and an optic control sensor. The mini stand is also shown.
  • Flash Head: Emits light.
  • Built-in Panel: Diffuses light.
  • Optic Control Sensor: Detects pre-flash for S1/S2 modes.
  • Hot Shoe: Connects to camera.
  • Delicated Hot Shoe Contact: Ensures electrical connection.
  • Lock Ring: Secures flash to camera hot shoe.
  • Mini Stand: For off-camera placement.
  • Battery Compartment: Holds 4x AA batteries.
  • Power Switch: Turns the flash on/off.
  • Charging Indicator: Shows flash readiness.
  • Mode Selection Button (M, S1, S2): Selects flash operating mode.
  • Output Level Indicator: Displays current power setting.
  • Flash Power Level Button (+/-): Adjusts flash output.
  • Motion Selection: (Likely refers to mode selection or specific settings).
  • Test Button: Fires a test flash.

Setup

1. Battery Installation:

The GODOX TT560II flash requires 4x AA batteries (alkaline or Ni-MH, not included). The RT Remote Transmitter requires a 12V 23A battery (not included).

  • For the Flash Unit: Open the battery compartment cover on the side of the flash. Insert 4x AA batteries according to the polarity indicators (+/-). Close the cover securely.
  • For the RT Remote Transmitter: Open the battery compartment on the transmitter. Insert one 12V 23A battery, observing polarity. Close the compartment.

2. Mounting the Flash:

GODOX TT560II flash unit with included accessories: wireless trigger, softbox diffuser, color gels, mini stand, and cleaning cloth.
The GODOX TT560II package includes the camera flash unit, an RT Remote Transmitter, a protection bag, a mini stand, and a manual. Ensure all components are present before setup.
  • On-Camera: Slide the flash's hot shoe onto your camera's hot shoe mount. Rotate the lock ring clockwise until the flash is securely fastened.
  • Off-Camera (with Mini Stand): Attach the flash to the included mini stand. The mini stand can be placed on a flat surface or mounted onto a light stand using its 1/4 inch screw thread.
Front and back view of the GODOX TT560II mini stand, showing the 1/4 inch screw mount.
The included mini stand provides a stable base for the flash when used off-camera. It features a 1/4 inch screw for mounting on light stands or other accessories.

3. Mounting the RT Remote Transmitter:

If using the flash off-camera with wireless control, slide the RT Remote Transmitter onto your camera's hot shoe mount. No locking mechanism is typically required for this lightweight transmitter.

Operating Instructions

1. Powering On/Off:

Slide the POWER switch on the flash unit to the 'ON' position to turn it on. Slide it to 'OFF' to power down. The charging indicator will illuminate when the flash is ready to fire.

2. Adjusting Flash Head Angle:

Diagram illustrating the horizontal 270-degree and vertical 90-degree rotation capabilities of the GODOX TT560II flash head.
The flash head can be rotated horizontally up to 270 degrees and tilted vertically up to 90 degrees, allowing for bounce flash and flexible lighting angles.

The flash head can be adjusted for various lighting directions:

  • Vertical Rotation: The flash head can be tilted upwards from 0 to 90 degrees.
  • Horizontal Rotation: The flash head can be rotated horizontally from 0 to 270 degrees.

Gently move the flash head to the desired position. It will click into place at common angles.

Flash Modes

Press the 'MODE' button to cycle through the available flash modes: M, S1, and S2.

1. M (Manual) Mode:

In Manual mode, you manually set the flash output power. This mode offers precise control over the flash intensity.

  • Press the '+' or '-' buttons to adjust the flash output from 1/128 to 1/1 power.
  • The output level indicator will show the current power setting.
Series of portrait photos demonstrating different flash power levels from 1/128 to 1/1, showing the effect on exposure.
The flash offers 8 levels of brightness control, from 1/128 to 1/1, allowing precise adjustment of flash output for various lighting conditions.

2. S1 (Optical Slave) Mode:

S1 mode is an optical slave mode where the flash will fire in response to another flash. It detects the first flash pulse from a master flash (e.g., your camera's built-in flash or another speedlite) and fires simultaneously. This mode is suitable for master flashes that do not emit a pre-flash.

3. S2 (Pre-flash Cancel Slave) Mode:

S2 mode is also an optical slave mode, but it is designed to ignore the pre-flash emitted by some camera's built-in flashes or dedicated speedlites. The TT560II will detect the pre-flash, ignore it, and then fire on the main flash pulse. This prevents premature firing and ensures proper synchronization.

Wireless Trigger Operation

The included RT Remote Transmitter allows for wireless control of the TT560II flash unit, enabling off-camera lighting setups.

GODOX TT560II flash unit positioned next to a camera with the RT Remote Transmitter mounted on its hot shoe, indicating wireless operation.
The RT Remote Transmitter enables wireless control of the flash unit. Mount the transmitter on your camera's hot shoe and set both the flash and transmitter to the same channel for wireless synchronization.

1. Setting Channels:

Both the flash unit and the RT Remote Transmitter have channel selection switches. Ensure both devices are set to the same channel (1-16) to establish a connection. This helps avoid interference from other wireless devices.

2. Wireless Synchronization:

  • Mount the RT Remote Transmitter onto your camera's hot shoe.
  • Place the TT560II flash unit at your desired off-camera location, either on its mini stand or a light stand.
  • Turn on both the camera, transmitter, and flash unit.
  • Ensure the flash unit is in M mode for manual power control.
  • When you press your camera's shutter button, the transmitter will send a signal, triggering the flash wirelessly.

The wireless working distance is approximately 15 meters indoors.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use solvents or abrasive cleaners.
  • Battery Care: Remove batteries from the flash and transmitter if they will not be used for an extended period to prevent leakage. Store batteries in a cool, dry place.
  • Storage: Store the flash unit in its protective bag in a cool, dry environment, away from direct sunlight and extreme temperatures.
  • Hot Shoe Contacts: Keep the hot shoe contacts clean and free of debris to ensure reliable connection with your camera.

Troubleshooting

  • Flash not firing:
    • Check battery levels in both the flash and the RT Remote Transmitter. Replace if necessary.
    • Ensure the flash is securely mounted on the camera hot shoe or properly connected wirelessly.
    • Verify the flash unit is powered on and the charging indicator shows it is ready.
    • If using wireless trigger, confirm both the flash and transmitter are set to the same channel.
    • Check camera settings to ensure external flash is enabled.
  • Weak flash output or inconsistent exposure:
    • Increase the flash power level in M mode.
    • Check battery levels; low batteries can result in reduced power.
    • Ensure the flash head is pointed correctly towards the subject or bounce surface.
  • Slow recycling time:
    • Recycling time is longer at full power (1/1). Reduce flash power if faster recycling is needed.
    • Ensure batteries are fresh or fully charged (for Ni-MH). Alkaline batteries generally have slower recycling times than Ni-MH.
  • Flash fires prematurely in S1/S2 mode:
    • If your master flash emits a pre-flash, ensure the TT560II is set to S2 mode. If it does not emit a pre-flash, use S1 mode.

Specifications

FeatureSpecification
BrandGODOX
ModelTT560II
Guide Number38 (105 mm ISO 100)
Flash ModeM, S1, S2
Flash Control8 levels of brightness control (1/128-1/1)
Vertical Rotation Angle0-90 degrees
Horizontal Rotation Angle0-270 degrees
Power Source (Flash)4x AA batteries (alkaline or Ni-MH)
Lighting Times100-1500 times (with AA alkaline batteries)
Recycling TimeApprox. 0.1-5s (with AA alkaline batteries)
Color Temperature5600±200K
Wireless Frequency433MHz
Wireless Channels16
Wireless Working Distance15m (indoor)
Flash Duration1/300s-1/20000s
Power Source (Trigger)12V 23A battery
Item Weight1.1 pounds
Package Dimensions10 x 7.56 x 3.46 inches

Warranty and Support

For technical assistance, troubleshooting beyond this manual, or inquiries regarding warranty coverage, please contact GODOX customer service directly. Refer to the product packaging or the official GODOX website for the most current contact information and warranty details.

© 2024 GODOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.