TONOR T40LP

TONOR T40LP Low Profile Mic Arm Desk Mount Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TONOR T40LP Low Profile Mic Arm Desk Mount. Please read these instructions carefully before use to ensure proper functionality and longevity of the product.

Package Contents

Verify that all components are present in the package:

  • Microphone Boom Arm
  • Desk Mount Clamp
  • 3/8'' to 5/8'' Screw Adapter
  • Four Cable Ties
Included components: microphone boom arm, desk mount clamp, screw adapter, and four cable ties.
Image: Included components of the TONOR T40LP Mic Arm.

Setup Instructions

  1. Attach the Desk Mount Clamp: Securely fasten the desk mount clamp to the edge of your desk. Ensure the clamp is tightened firmly to prevent movement. The clamp supports desks up to 2.76 inches (7cm) thick.
    2. Desk mount clamp attached to a wooden desk, showing 360-degree rotation and maximum desk thickness of 2.76 inches.
    Image: Desk clamp installation and rotation capability.
  2. Insert the Boom Arm: Insert the base of the microphone boom arm into the hole on the desk mount clamp. Tighten the knob on the clamp to secure the arm in place.
  3. Attach Your Microphone:
    • The boom arm features a standard 3/8'' screw.
    • If your microphone requires a 5/8'' screw, use the included 3/8'' to 5/8'' screw adapter.
    • Screw your microphone or microphone shock mount onto the boom arm's screw or adapter.
    4. Diagram showing a 3/8 inch screw and a 5/8 inch adapter, with various microphones compatible with the boom arm.
    Image: Microphone compatibility with 3/8'' screw and 5/8'' adapter.
  4. Cable Management: Use the provided cable ties to secure your microphone cable along the boom arm. This helps maintain a tidy workspace and prevents cable interference.
A white low-profile microphone boom arm mounted on a desk, positioned below a computer monitor, with a microphone attached.
Image: TONOR T40LP Mic Arm in a low-profile setup, providing an unobstructed view.

Operating Instructions

The TONOR T40LP mic arm offers flexible adjustment for optimal microphone positioning.

  • Horizontal Rotation: The arm can rotate 360 degrees horizontally at its base, allowing you to swing the microphone into position or out of the way.
  • Vertical Adjustment: The arm features 90-degree vertical adjustment, enabling you to raise or lower the microphone to your desired height.
  • Reach Adjustment: The arm extends up to 30.3 inches (77cm) in width and 19.1 inches (48.5cm) in height, accommodating various desk sizes and user preferences.
  • Load Capacity: The sturdy metal construction supports microphones weighing up to 1.5kg (3.3lbs).
Diagram illustrating the flexible adjustment capabilities of the mic arm, including 360-degree rotation, 90-degree vertical adjustment, and arm extension measurements.
Image: Flexible adjustment ranges for the mic arm.
A microphone boom arm with a 3.3 lbs (1.5 kg) weight hanging from its end, demonstrating its excellent load capacity.
Image: Demonstration of the mic arm's load capacity.

Video Guide: TONOR Microphone Boom Arm Overview

Video: This official TONOR video provides a visual overview of the microphone boom arm's features and adjustments.

Maintenance

  • Cleaning: Wipe the mic arm with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • Joint Inspection: Periodically check all joints and knobs to ensure they are securely tightened. This maintains stability and prevents unwanted movement.
  • Spring Mechanism: The T40LP features a hidden spring design. Avoid disassembling the arm to access internal springs, as this may damage the product and void the warranty.

Troubleshooting

  • Arm not holding position: Ensure all adjustment knobs and the desk clamp are tightened securely. Over time, heavy microphones may require re-tightening.
  • Noise during adjustment: The T40LP's hidden spring design minimizes noise. If you experience unusual noise, check for any loose components or obstructions.
  • Microphone not fitting: Verify that your microphone's screw thread size is either 3/8'' or 5/8''. Use the provided adapter if necessary.

Specifications

Model NameT40LP
BrandTONOR
ColorWhite
MaterialAlloy Steel, Acrylonitrile Butadiene Styrene (ABS)
StyleInvisible Spring
Base TypeClamp
Maximum Height19.1 Inches (48.5 cm)
Microphone Thread Size3/8 inch, 5/8 Inch
Maximum Weight Recommendation1.5 Kilograms (3.3 lbs)
Included ComponentsMicrophone Boom Arm, Desk Mount Clamp, Screw Adapter, Four Cable Ties

Warranty Information

This product comes with a 2-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official TONOR website or contact customer support.

Customer Support

For further assistance, technical support, or inquiries regarding your TONOR T40LP Mic Arm, please visit the official TONOR store or contact their customer service department.

Official TONOR Store: TONOR Amazon Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.