1. Introduction
This user manual provides essential information for the safe and efficient use of your Faber NiOS AUTO 3BB BK 3 Burner Auto-Ignition Cooktop. Please read these instructions carefully before installation, operation, or maintenance. Retain this manual for future reference.
2. Safety Instructions
Always prioritize safety when operating gas appliances. Failure to follow these instructions may result in fire, explosion, electric shock, or other injuries.
- Ensure proper ventilation in the kitchen area during use.
- Do not store flammable materials near the cooktop.
- Keep children and pets away from the appliance during operation.
- If you smell gas, immediately turn off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact your gas supplier or a qualified technician.
- Do not use abrasive cleaners or sharp objects on the glass surface.
- Ensure all burners are turned off after cooking.
- Installation and servicing should only be performed by a qualified technician.
3. Product Overview
The Faber NiOS AUTO 3BB BK cooktop features a sleek design with three high-efficiency brass burners and battery-operated auto-ignition.
3.1 Included Components
Upon unpacking, verify that all components are present:
- 1 Gas Stove
- 1 Warranty Card
- 1 User Manual
- Cleaning Pin
- Batti Stand
3.2 Product Features
- Freestanding design with 8mm toughened black glass.
- High-efficient designer brass burners (1 Jumbo, 1 Medium, 1 Small).
- Battery-operated auto ignition for convenience.
- Heat-resistant metal knobs.
- Diamond-coated round pan supports and stainless steel drip tray.
3.3 Product Images
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your cooktop. It is strongly recommended that installation be performed by a qualified and certified technician.
4.1 Placement
- Place the cooktop on a stable, level, and heat-resistant surface.
- Ensure adequate clearance from walls and overhead cabinets as per local regulations.
- The area should be well-ventilated.
4.2 Gas Connection
- Connect the cooktop to a suitable gas supply (LPG or PNG, as applicable) using an approved gas hose and regulator.
- Check all connections for leaks using a soapy water solution. Bubbles indicate a leak.
- Do not use an open flame to check for leaks.
4.3 Battery Installation for Auto-Ignition
- Locate the battery compartment, typically on the underside of the cooktop.
- Insert the required battery (usually a D-cell) ensuring correct polarity (+/-).
- Close the battery compartment securely.
5. Operating Instructions
5.1 Lighting a Burner
- Ensure the gas supply is open.
- Push down and turn the corresponding control knob counter-clockwise to the 'ON' position. You will hear a clicking sound as the auto-ignition sparks.
- Hold the knob down for a few seconds until the flame ignites and stabilizes.
- Release the knob. If the flame extinguishes, repeat the process.
- Adjust the flame intensity by turning the knob between 'ON' (maximum flame) and 'MIN' (minimum flame).
5.2 Turning Off a Burner
- Turn the control knob clockwise until it clicks into the 'OFF' position.
- Ensure the flame is completely extinguished.
5.3 Burner Types
Your cooktop is equipped with three high-efficient brass burners:
- Jumbo Burner: For large utensils and high-heat cooking.
- Medium Burner: For standard cooking needs.
- Small Burner: For simmering and smaller utensils.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your cooktop.
6.1 General Cleaning
- Always ensure the cooktop is cool and the gas supply is turned off before cleaning.
- Wipe the glass surface with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads.
- For stubborn stains, use a glass cleaner specifically designed for cooktops.
6.2 Burner and Pan Support Cleaning
- Remove the pan supports and burner components (burner caps and bases).
- Wash them with warm soapy water. For brass burners, avoid harsh chemicals that may tarnish the finish.
- Use the provided cleaning pin to clear any blockages in the burner holes.
- Ensure all parts are completely dry before reassembling them. Incorrect reassembly can affect burner performance.
6.3 Battery Replacement
- If the auto-ignition becomes weak or stops sparking, the battery may need replacement.
- Follow the instructions in Section 4.3 to replace the battery.
7. Troubleshooting
Before contacting customer service, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite. | No gas supply, clogged burner holes, weak battery, wet burner components. | Check gas supply, clean burner holes with cleaning pin, replace battery, ensure burner components are dry. |
| Flame is uneven or yellow. | Clogged burner holes, incorrect burner assembly. | Clean burner holes, ensure burner cap and base are correctly seated. |
| Gas smell detected. | Gas leak. | Immediately turn off gas supply, ventilate area, do not operate electrical switches, contact a qualified technician. |
| Knob is stiff or hard to turn. | Food debris or grease accumulation. | Clean around the knob area. Do not force the knob. If issue persists, contact service. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Faber |
| Model Name | NiOS AUTO 3BB BK |
| Item Model Number | 106.0708.177 |
| Type | Freestanding Cooktop |
| Number of Burners | 3 |
| Burner Type | High Efficient Designer Brass Burners (1 Jumbo + 1 Medium + 1 Small) |
| Ignition Type | Auto Ignition (Battery Operated) |
| Knobs | Heat Resistant Metal Knobs |
| Pan Support | Diamond Coated Round Pan Support |
| Drip Tray | Stainless Steel |
| Glass Type | 8mm Toughened Black Glass |
| Color | Black |
| Item Dimensions (LxWxH) | 51 x 75 x 11 Centimeters |
| Item Weight | 14 kg 200 g |
| Power Source | Gas Powered |
| Fuel Type | Gas |
| Manufacturer | Franke Faber India Pvt Ltd |
9. Warranty and Support
9.1 Warranty Information
Your Faber NiOS AUTO 3BB BK Cooktop comes with the following warranty:
- 7 Years Warranty on Glass
- 5 Years Warranty on Burner & Valve
- 2 Years Comprehensive Warranty on the entire product
Please refer to the included Warranty Card for detailed terms and conditions.
9.2 Customer Support
For any service requests, technical assistance, or warranty claims, please contact Faber customer support:
- Contact Number: 1800-209-3484
- Manufacturer Address: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA
When contacting support, please have your model number (106.0708.177) and purchase details ready.
