1. Introduction and Safety Guidelines
This manual provides essential information for the safe operation, assembly, and maintenance of your GYROCOPTERS Flash 6.0 Electric Scooter. Please read it thoroughly before first use and retain it for future reference.
Important Safety Information:
- The Gyrocopters Flash 6.0 Electric Scooter is UL2272 approved, meeting high safety standards.
- Always wear a helmet and appropriate safety gear when riding.
- Ensure all components are securely fastened before each ride.
- The scooter features a push-to-start design for smooth acceleration.
- Recommended for adult and teen riders. Maximum load capacity is 120 kg (265 lbs).
- Do not ride in heavy rain or through standing water.
2. Package Contents
Verify that all items are present in the box:
- 1 x Gyrocopters Flash 6.0 Electric Scooter
- 1 x E-scooter Charger
- 1 x Safety Manual (this document)
3. Setup and Assembly
Follow these steps to assemble your Gyrocopters Flash 6.0 Electric Scooter:
- Carefully remove all components from the packaging.
- Attach the handlebar to the main stem. Ensure it is aligned correctly and secured with the provided screws and tools.
- Install the kickstand on the underside of the scooter deck using the provided screws.
- Ensure all connections are tight and secure before proceeding.

For a visual guide on assembly and initial setup, please refer to the video below:
4. Operating Instructions
4.1 Power On/Off and LED Display
To power on the scooter, press and hold the power button on the LED display for 3 seconds. The LED display will show speed, battery level, and current mode. To power off, press and hold the power button again for 3 seconds.

4.2 Speed Modes
The Flash 6.0 offers four speed modes:
- Walk Mode (6 km/h): For beginners or walking alongside the scooter.
- Eco Mode (10 km/h): For extended battery life and efficient travel.
- Normal Mode (20 km/h): Standard mode for daily commutes.
- Sports Mode (30 km/h): For maximum speed and power.
Switch between modes by pressing the power button once while the scooter is on.

4.3 Riding and Braking
- Push to Start: The scooter requires a gentle push with your foot before engaging the throttle for safety.
- Throttle: Use the thumb throttle on the right handlebar to accelerate.
- Brakes: The scooter is equipped with dual braking (EABS + Disc Brakes). Use the brake lever on the left handlebar to slow down or stop. Bright red brake lights activate upon braking.
- Cruise Control: To activate cruise control, hold the throttle in a steady position for 5 seconds. The scooter will maintain its speed. To deactivate, press the brake or throttle.
- LED Headlights: Press the power button once to turn the headlight on or off.

4.4 App Integration (Tuya App)
Connect your Flash 6.0 to the Tuya app via Bluetooth for enhanced control and features:
- Remote locking/unlocking.
- Headlight control.
- Cruise control settings.
- Ride history tracking.
Download the "Tuya" app from the Google Play Store (Android) or Apple App Store (iOS).

5. Maintenance
5.1 Battery Management System (BMS)
The scooter features an advanced BMS to ensure battery safety and longevity. This system prevents overcharging, overheating, undervoltage, overcurrent, and short circuits.
5.2 Charging
To charge the scooter, connect the charger to a power outlet and then to the scooter's charging port. The charger indicator light will typically show red during charging and turn green when fully charged. Always use the provided charger.
5.3 Cleaning and Storage
- Clean the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
- Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
- The scooter is foldable for convenient storage and transport.

6. Troubleshooting
If you encounter issues with your scooter, consider the following common solutions:
- Scooter not turning on: Ensure the battery is charged. Check the power button for proper function.
- Loss of power/range: Fully charge the battery. Riding in Sports mode or on inclines will reduce range.
- Brakes not responsive: Check brake cable tension and disc brake alignment.
- App connectivity issues: Ensure Bluetooth is enabled on your device and the scooter is powered on. Try restarting both the app and the scooter.
For persistent issues, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | Flash 6.0 |
| Brand | GYROCOPTERS |
| Motor Power | 350W brushless (500W peak) |
| Max Speed | 30 km/h (18.6 mph) |
| Max Range | Up to 30 km |
| Weight Limit | 120 kg (265 lbs) |
| Item Weight | 13 kg (28.6 lbs) |
| Wheel Size | 8.5 Inches (Solid Rubber Tires) |
| Brake Style | Dual Braking (EABS + Disc Brake) |
| Special Features | APP Control, Foldable, Portable, Lightweight, Cruise Control, LED Headlights, BMS, 4-Speed modes, 20% Hill Grade |
| Safety Certification | UL2272 Approved |

8. Warranty and Support
8.1 Warranty Information
The Gyrocopters Flash 6.0 Electric Scooter comes with a 90-day limited warranty.
8.2 Customer Support
For any questions, concerns, or warranty claims, please contact IMGadgets customer service:
- Phone: +1 647-797-3804
- Email: customercare@imgadgets.com
- Chat: www.imgadgets.com
- Available Monday to Friday, from 10:00 AM to 6:00 PM.







