1. Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your Funsicle Oasis Designer Lap Rectangular Above Ground Swimming Pool. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Image 1.1: The Funsicle Oasis Designer Lap Rectangular Above Ground Swimming Pool in use.
The Funsicle Oasis Designer Lap pool is designed for recreational swimming. It features a sophisticated triple basketweave exterior print and a honeycomb interior. The pool dimensions are 18 feet long, 9 feet wide, and 52 inches high, with a capacity of approximately 4721 gallons.
2. Safety Information
WARNING: Failure to follow these safety instructions can result in serious injury or death.
- Adult supervision is required at all times when children are in or near the pool.
- No diving or jumping into the pool. The pool is not deep enough for such activities.
- Ensure the pool is installed on a level, stable surface free of sharp objects.
- Keep children away from the pool filter pump and electrical connections.
- Always secure the ladder when the pool is not in use to prevent unsupervised access.
- Review local HOA rules and restrictions regarding private above-ground pools before installation. Not all housing agencies permit them.
- Maintain proper water chemistry to ensure a safe and healthy swimming environment.
3. Setup and Assembly
The Funsicle Oasis Designer Lap pool features ultra-strong oval poles for a stable and reliable assembly. Follow these general steps for setup:
- Site Preparation: Choose a flat, level area free of debris, rocks, and sharp objects. Clear any vegetation.
- Ground Cloth Placement: Lay the included ground cloth on the prepared site to protect the pool liner.
- Unpack Components: Carefully unpack all pool components, including the liner, frame poles, and accessories. Refer to the product box for a visual guide of included items.
Image 3.1: Overview of included components as depicted on the product packaging.
- Frame Assembly: Assemble the metal frame according to the detailed instructions provided in the separate assembly guide. Ensure all poles are securely connected.
- Liner Installation: Carefully spread the pool liner within the assembled frame, ensuring it is centered and smooth.
- Filter Pump Installation: Install the FiltraBoost 1200 GPH Filter Pump (110-120V with GFCI) by attaching it to the designated ports on the pool wall. This pump is designed to be attached to the pool wall to minimize tripping hazards.
Image 3.2: The FiltraBoost 1200 GPH Filter Pump with its Type C filter cartridge.
- Ladder Assembly: Assemble the SureStep ladder. Ensure it is placed on a stable surface and securely attached to the pool. The ladder is removable for safety.
Image 3.3: The removable SureStep ladder for safe pool entry and exit.
- Filling the Pool: Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the liner. Stop filling when the water reaches the recommended level.
4. Operating the Pool and Filter Pump
Once the pool is filled, the filter pump is crucial for maintaining water clarity.
- Starting the Pump: Ensure the pump is properly connected to a GFCI-protected outlet. Turn on the pump to begin water circulation and filtration.
- Filtration Cycle: Operate the filter pump for several hours each day to ensure adequate water turnover. The exact duration depends on pool size, usage, and environmental conditions.
- Water Chemistry: Regularly test pool water for pH, chlorine, and alkalinity levels. Adjust chemicals as needed to maintain a balanced and sanitary swimming environment.
Image 4.1: Water circulation from the filter pump outlet.
5. Maintenance
Regular maintenance is essential for the longevity of your pool and the quality of its water.
- Filter Cartridge Cleaning/Replacement: The FiltraBoost 1200 GPH pump uses a Type C filter cartridge. Clean the cartridge weekly by rinsing it with a garden hose. Replace the cartridge every 2-4 weeks, or more frequently with heavy use.
- Skimming and Vacuuming: Use the included maintenance kit to remove debris from the water surface and vacuum the pool floor.
Image 5.1: The included deluxe maintenance kit for pool cleaning.
- Pool Cover Use: Use the included pool cover when the pool is not in use to prevent leaves and debris from entering the water and to reduce evaporation.
Image 5.2: The pool cover helps protect the water from debris.
- Liner Inspection: Periodically inspect the 3-ply ToughMesh PVC liner for any signs of wear, punctures, or leaks. Use the included repair patch for minor damages.
- Frame Inspection: Check the metal frame for rust or damage. The matte finish on the poles helps protect against corrosion.
- Winterization: For colder climates, properly winterize the pool by draining, cleaning, and disassembling it for storage according to the separate winterization guide.
6. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not running | No power; GFCI tripped; Motor issue | Check power connection; Reset GFCI; Contact customer support if motor fails. |
| Poor water circulation | Clogged filter cartridge; Air in system; Blocked intake/outlet | Clean or replace filter cartridge; Bleed air from pump; Clear any blockages. |
| Cloudy water | Insufficient filtration; Improper water chemistry; High bather load | Run pump longer; Test and adjust chemicals; Shock treat the pool. |
| Water leaking from pool | Puncture in liner; Loose hose connections | Locate and repair puncture with patch kit; Tighten all hose clamps. |
7. Specifications
- Model: P4N1809LB
- Dimensions: 216"L x 108"W x 52"H (18 ft x 9 ft x 52 in)
- Capacity: Approximately 4721 Gallons
- Material: 3-ply ToughMesh Polyvinyl Chloride (PVC)
- Shape: Rectangular
- Filter Pump: FiltraBoost 1200 GPH (110-120V with GFCI)
- Filter Cartridge Type: Type C
- Included Components: Filter Pump, Type C Filter Cartridge, SureStep Ladder, Pool Cover, Ground Cloth, Deluxe Maintenance Kit, Repair Patch
- Indoor/Outdoor Usage: Outdoor
- Assembly Required: Yes
Image 7.1: Cross-section view of the durable 3-ply ToughMesh PVC material.
8. Product Overview Video
Watch this video for a visual overview of the Funsicle Oasis Rectangle Outdoor Above Ground Swimming Pool, including its features and setup process.
Video 8.1: Funsicle Oasis Rectangle Outdoor Above Ground Swimming Pool Overview (Duration: 4:57).
9. Warranty Information
For detailed warranty information regarding your Funsicle Oasis Designer Lap Rectangular Above Ground Swimming Pool, please refer to the warranty card included with your product or visit the official Funsicle website. Warranty terms and conditions may vary.
10. Customer Support
If you require assistance with assembly, operation, maintenance, or troubleshooting that is not covered in this manual, please contact Funsicle customer service. Contact details can typically be found on the product packaging, the official Funsicle website, or the warranty documentation.