Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your UPGENT LD218 Series Gas Spring Arm Monitor Holder. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
The UPGENT LD218 is a versatile monitor mount designed for various applications, including floor mounting or bedside/sofa-side fixing, suitable for entertainment rooms or foot massage chairs. It features a gas spring arm for easy adjustment of monitor position.
Figure 1: UPGENT LD218 Gas Spring Arm Monitor Mount (LD218B1 Silver Variant).
This image shows the complete LD218 gas spring arm monitor mount in its silver color variant, ready for installation. It highlights the adjustable arm and the base for either floor or side mounting.
Safety Information
WARNING: Failure to read and follow all instructions may result in property damage, serious injury, or death.
- Do not exceed the maximum load capacity of 5 kg (11 lbs).
- Ensure the mounting surface (floor or side) is structurally sound and can support the combined weight of the mount and the monitor.
- Use only the provided hardware. If any parts are missing or damaged, contact customer support immediately.
- This product contains small items that could be a choking hazard if swallowed. Keep away from children.
- Always have two people assist with heavy lifting during installation.
Package Contents
Verify that all components are present and undamaged before beginning assembly.
- Gas Spring Arm Assembly
- Column Pole (800mm height)
- Mounting Base (Floor or Side Mount)
- VESA Plate (75x75mm / 100x100mm compatible)
- Hardware Kit (Screws, Washers, Allen Keys)
- Cable Management Clips
Setup and Installation
The LD218 mount offers two primary installation methods: side mount and floor mount. Choose the method that best suits your application.
1. Choose Installation Method
Figure 2: Available Installation Methods.
This image illustrates the two distinct installation options for the LD218 monitor mount: a side mount, which attaches to a vertical surface, and a floor mount, which secures to a horizontal surface.
- Side Mount: Ideal for attaching to the side of a sofa, bed frame, or other furniture.
- Floor Mount: Suitable for securing the mount directly to the floor next to a chair or bed.
2. Assemble the Column Pole and Base
Attach the chosen mounting base (side or floor) to the bottom of the 800mm column pole using the provided screws. Ensure a secure and stable connection.
3. Secure the Mount to the Desired Surface
Position the assembled column and base at your desired location. Mark the drilling points through the holes in the base. Drill pilot holes if necessary, then secure the base firmly to the floor or side surface using appropriate fasteners (not always included, depending on surface material).
Figure 3: Example Installation with Sofa.
This image demonstrates the LD218 monitor mount installed adjacent to a sofa, showcasing its application in a living or entertainment space. The monitor is attached to the arm, positioned for comfortable viewing from the sofa.
4. Attach the Gas Spring Arm Assembly
Slide the gas spring arm assembly onto the column pole. Ensure it is oriented correctly and can move freely up and down the pole. Tighten any securing screws on the arm to fix its vertical position if desired, or allow it to slide for height adjustment.
5. Mount the Monitor
- Attach the VESA plate to the back of your monitor using the screws appropriate for your monitor's VESA pattern (75x75mm or 100x100mm).
- Carefully slide the monitor (with the attached VESA plate) onto the arm's VESA mounting head. Secure it with the locking mechanism or screws as per the design.
Ensure the monitor is securely attached before releasing it.
Operating Instructions
The LD218 monitor mount is designed for flexible positioning of your display.
Adjusting Monitor Position
- Height Adjustment: The gas spring arm allows for smooth vertical movement. Gently push or pull the monitor to the desired height. If the arm does not hold its position, the gas spring tension may need adjustment (see Maintenance section).
- Tilt Adjustment: The monitor can be tilted 180 degrees (from -90 to +90 degrees relative to horizontal). Loosen the tilt knob/screw, adjust the angle, and then re-tighten.
- Swivel Adjustment: The arm can swivel -90 to +90 degrees horizontally. Gently rotate the monitor to the desired viewing angle.
- Arm Extension/Retraction: The articulated arm allows you to extend or retract the monitor from the pole.
Figure 4: LD218 Dimensions and Range of Motion.
This diagram illustrates the key dimensions of the LD218 monitor mount, including the 80cm column height and the 60cm arm extension. It also visually represents the range of motion for the gas spring arm, showing how the monitor can be positioned.
Cable Management
Utilize the integrated cable management clips or channels along the arm and pole to route your monitor cables neatly. This helps maintain a clean appearance and prevents cable damage.
Figure 5: Cable Management Feature.
This image highlights the cable management system integrated into the LD218 monitor mount, showing how cables can be neatly routed along the arm and pole for a tidy setup. Both silver and black variants are shown with their respective cable routing paths.
Maintenance
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten as necessary.
- Cleaning: Wipe the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Gas Spring Tension Adjustment: If the monitor sags or rises too easily, the gas spring tension may need adjustment. Use the provided Allen key to turn the adjustment screw (usually located on the arm near the VESA plate or the main pivot) clockwise to increase tension for heavier monitors, or counter-clockwise to decrease tension for lighter monitors. Adjust gradually until the monitor holds its position.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor sags or won't stay at desired height. | Gas spring tension is too low for monitor weight. | Increase gas spring tension (clockwise) using the Allen key. |
| Monitor is difficult to move vertically. | Gas spring tension is too high for monitor weight. | Decrease gas spring tension (counter-clockwise) using the Allen key. |
| Monitor wobbles or feels unstable. | Loose connections or improper installation. | Check all screws and bolts, especially at the base and arm joints. Ensure the mount is securely fastened to the floor/side. |
| VESA plate does not fit monitor. | Monitor VESA pattern is not 75x75mm or 100x100mm. | Verify your monitor's VESA compatibility. This mount supports 75x75mm and 100x100mm. |
Specifications
| Feature | Detail |
|---|---|
| Model No. | BL-LD218 (LD218B1 Variant) |
| Material | Aluminum alloy, Carbon steel |
| Compatible Screen Size | 13-24 inches |
| VESA Compatibility | 75x75mm, 100x100mm |
| Maximum Loading Capacity | 5 kgs (11 lbs) |
| Tilt Range | 180 degrees (-90 to +90) |
| Swivel Range | 180 degrees (-90 to +90) |
| Column Height | 800mm (approx. 31.5 inches) |
| Installation Options | Floor mount, Side mount |
| Color (LD218B1) | Silver |
Warranty Information
UPGENT products are manufactured with high-quality materials and craftsmanship. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official UPGENT website.
Customer Support
If you have any questions, require assistance with installation, or need to report missing/damaged parts, please contact UPGENT customer support.
- Website: Visit UPGENT on Amazon (for general product information)
Please have your model number (BL-LD218) and purchase date ready when contacting support.
