Introduction
Thank you for choosing the amseatec LY-5067-BR Office Chair. This manual provides essential information for the proper assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
WARNING: Do not exceed the maximum weight limit of 250 pounds. Keep the chair away from children when not in use to prevent entrapment hazards. Always assemble and use the chair according to the provided instructions.
Setup and Assembly
Assembly of your amseatec office chair is straightforward and typically takes about 30 minutes. All necessary tools and detailed instructions are included. For a visual guide, please refer to the assembly video below.
Video: amseatec LY-5067-1 User Assembly Instruction. This video demonstrates the step-by-step process of assembling the office chair, including attaching the base, gas lift, seat, backrest, and armrests.
Assembly Steps Overview:
- Base Assembly: Connect the split base tubes to the central base tube using the provided screws and Hexagon Wrench.
- Caster Installation: Insert the five castors into the ends of the base tubes.
- Gas Lift Insertion: Place the air rod (gas lift) through the central base tube.
- Backrest and Seat Connection: Attach the backrest to the steel plate, then fasten the seat cushion to the steel plate using the specified screws and Hexagon Wrench.
- Armrest Attachment: Fix the two armrests between the backrest and the seat cushion, tightening the screws with the Hexagon Wrench. Cover the screws with decoration caps.
Image: The amseatec LY-5067-BR Office Chair in brown, featuring a high back, padded armrests, and a retractable footrest. This image provides an overall view of the assembled product.
Operating Instructions
Your amseatec office chair is designed with multiple adjustable features to enhance your comfort and support throughout the day. Refer to the usage video for a demonstration of these functions.
Video: amseatec LY-5067-1 Using Instruction. This video illustrates how to use the chair's adjustable features, including seat height, backrest recline, and footrest.
Adjustable Features:
- Seat Height Adjustment: Locate the lever on the right side under the seat. Lift the lever to adjust the seat to your desired height. Release the lever to lock the height.
- Backrest Recline: Use the lever on the left side under the seat. Lift the lever to unlock the backrest, lean back to any angle between 90° (work) and 135° (sleep), then lower the lever to lock the backrest in position.
- Retractable Footrest: Pull out the footrest from under the seat to extend it for relaxation. Push it back in when not in use.
- Flip-up Armrests: The armrests can be flipped up to allow the chair to slide further under a desk or for increased mobility.
Image: This image highlights the multi-functionality of the amseatec office chair, illustrating the adjustable height, backrest recline (90° work, 105° rest, 135° sleep), and retractable footrest.
Maintenance
To ensure the longevity and appearance of your amseatec office chair, follow these simple maintenance guidelines:
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the PU leather.
- Regular Checks: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability.
- Caster Care: Keep the casters free of debris (hair, dust, etc.) to ensure smooth 360° rotation and movement.
Troubleshooting
If you encounter any issues with your amseatec office chair, please refer to the following common solutions:
- Chair Sinks or Won't Stay Up: This typically indicates an issue with the gas lift cylinder. Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement.
- Squeaking Noises: Check all bolted connections and tighten any loose screws. Applying a small amount of lubricant to moving parts (e.g., the tilt mechanism) can also help.
- Difficulty Rolling: Inspect the casters for trapped hair or debris. Clean them thoroughly. Ensure the chair is used on an appropriate surface (hard floor recommended).
- Backrest Not Locking: Verify that the recline lock lever is fully engaged. If the mechanism feels loose, check the connection points for the backrest.
If these steps do not resolve the issue, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | amseatec |
| Model Name | LY-5067-BR |
| Color | Brown |
| Material | Carbon Steel, High Rebound Sponge, High-density Foam, Metal, Premium Upholstered Leather |
| Product Dimensions (D x W x H) | 21.2"D x 27.6"W x 47.2"H |
| Item Weight | 40.1 Pounds |
| Maximum Weight Recommendation | 250 Pounds |
| Recommended Uses | Gaming, Office, Working from home |
| Additional Features | Adjustable Foot Rest, Adjustable Height, Ergonomic Adjustable Backrest, Premium Upholstered Leather, Reclining Desk Chair |
| Reclining Position Count | Infinite Position |
| Furniture Base Movement | Swivel |
| Product Care Instructions | Wipe Clean |
Image: Detailed product dimensions of the amseatec office chair, including height, width, and depth measurements.
Warranty
The amseatec LY-5067-BR Office Chair comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and significant malfunctions under normal use. Please retain your proof of purchase for any warranty claims.
Customer Support
For any questions, concerns, or assistance with your amseatec office chair, please do not hesitate to contact our customer support team. We are committed to providing excellent after-sales support.
Contact Information:
- Email: Amseatecservice@outlook.com
- Online: You can also contact us through your Amazon account by navigating to 'Your Orders', finding the relevant order, and clicking 'Contact Seller'.
Image: Visual guide on how to contact amseatec customer support via Amazon, including the direct email address.