Introduction
Thank you for choosing the Teamson Home 29-inch 3-Tier Cascading Bowl Fountain with Planter. This outdoor water feature is designed to enhance your outdoor living space with the soothing sound of flowing water and integrated LED lighting. The top tier also functions as a planter for small plants (plants not included).
Please read this manual thoroughly before assembly and operation to ensure safe and proper use of your fountain. Keep this manual for future reference.
Safety Information
- Always disconnect the power supply before performing any maintenance or cleaning.
- Ensure the fountain is placed on a level, stable surface to prevent tipping.
- Do not operate the pump without water. This will damage the pump.
- Keep children and pets away from the fountain during operation and maintenance.
- Use only clean water in the fountain. Do not use chemicals or abrasive materials for cleaning.
- Protect the power cord from sharp objects, heat, and excessive foot traffic.
- Do not lift the fountain by the power cord.
- During freezing temperatures, drain the fountain completely and store it indoors to prevent damage.
- This product is for outdoor use only.
Package Contents
Please check to ensure all parts are present and undamaged:
- Fountain Unit (main body with integrated bowls and planter)
- Water Pump with 72.04" cord and suction cups
- LED Lights (integrated)
- Instruction Manual

Image: Components of the Teamson Home 3-Tier Cascading Bowl Fountain, highlighting the planter box, cascading water flow, and integrated LED lights.
Setup Instructions
- Unpack: Carefully remove all components from the packaging. Place them on a soft, clean surface to avoid scratches.
- Placement: Choose a level and stable location for your fountain. Ensure it is near a suitable outdoor electrical outlet.
- Pump Installation: Locate the water pump. Submerge the pump completely in the lowest basin of the fountain. The pump includes suction cups for secure placement at the bottom of the basin.
- Connect Tubing: Connect the tubing from the fountain to the outlet on the water pump. Ensure a snug fit to prevent leaks.
- Fill with Water: Fill the fountain with distilled water until the pump is fully submerged and the water level is sufficient for continuous flow. The water capacity is approximately 4.2 gallons.
- Connect Power: Plug the power cord into a grounded outdoor electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI).
- Adjust Flow (if applicable): Some pumps have an adjustable flow rate. If your pump has this feature, adjust it to your desired water flow.
- Planter Use: The top section of the fountain can be used as a planter for small annuals or houseplants. Note that the planter does not have a drain hole, so use potted plants or ensure proper drainage if planting directly.

Image: The Teamson Home 3-Tier Cascading Bowl Fountain with Planter, showcasing its design and water flow.
Operating Instructions
- Once the fountain is assembled and filled with water, plug it into a GFCI-protected outdoor outlet. The pump and LED lights will activate.
- There is no separate on/off switch on the fountain itself; operation is controlled by plugging/unplugging the unit or using a timer connected to the outlet.
- Regularly check the water level and refill as needed to ensure the pump remains submerged. Evaporation will cause the water level to drop over time.
Video: This video demonstrates the Teamson Home 29-inch 3-Tier Cascading Bowl Fountain in operation, highlighting the gentle water flow and the illumination from the integrated LED lights in each bowl.
Maintenance
- Water Level: Check the water level daily and add water as necessary to keep the pump fully submerged.
- Cleaning: Periodically clean the fountain and pump to prevent mineral buildup and algae growth. Disconnect power before cleaning. Use a soft brush and mild soap with water. Rinse thoroughly.
- Pump Cleaning: The pump may need to be cleaned every few weeks, depending on water quality. Disassemble the pump according to its instructions (usually involves removing the cover and impeller) and clean any debris.
- Winterization: Before the first freeze, drain all water from the fountain and pump. Clean the unit and store it indoors in a dry, protected area. Do not allow water to freeze in the fountain, as this can cause damage.

Image: A detailed view of the water flowing between the tiers and the warm glow of the LED lights, emphasizing the need for regular cleaning to maintain clarity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not working / Pump not running |
|
|
| Water flow is weak or inconsistent |
|
|
| LED lights not working |
|
|
| Excessive splashing |
|
|
Specifications
| Model Number | RJ-23064G |
| Dimensions (L x W x H) | 17.32" x 12.4" x 29.13" (44cm x 31.5cm x 74cm) |
| Water Capacity | 4.2 gallons |
| Material | Polyresin, Stone Powder |
| Power Source | Corded Electric |
| Item Weight | 27.45 lbs |
| Cord Length | 72.04 inches (pump cord) |
| Special Feature | Integrated LED Lights, Removable Shelf (for planter) |

Image: Dimensional diagram of the fountain, indicating its length, width, and height.
Warranty and Support
For any questions, missing parts, or warranty claims, please contact Teamson Home customer support. Refer to your purchase documentation or the manufacturer's website for specific warranty details and contact information.
Manufacturer: Teamson Home
UPC: 810136540901