1. Introduction
Thank you for choosing Torkase LED Outdoor String Lights. This manual provides essential information for the safe and efficient use of your new lighting product. Please read it thoroughly before installation and operation, and retain it for future reference.

Image 1.1: Torkase LED Outdoor String Lights in an evening setting.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, please follow these instructions carefully.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Do not connect the string lights to a power source while they are still in the packaging.
- Do not install near gas or electric heaters, fireplaces, candles, or other similar heat sources.
- Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not allow the bulbs to rest on the supply cord or any wire.
- Inspect the product carefully before use. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- This product is designed for indoor and outdoor use (IP54 rated). However, avoid submerging the product in water.
- Use only with compatible dimmers (not included) if dimming functionality is desired.
- Keep out of reach of children.
3. Package Contents
Verify that all components are present and in good condition upon opening the package:
- 1 x Torkase LED Outdoor String Lights (33.5 meters / 110 feet)
- 56 x G40 LED Bulbs (pre-installed)
- 2 x Spare G40 LED Bulbs
- 1 x User Manual
4. Setup and Installation
Follow these steps for proper installation of your string lights:
- Planning the Layout: Before installation, plan the desired layout for your string lights. Consider the length (33.5m) and the placement of the power outlet.
- Mounting: Each G40 bulb is equipped with a convenient hook above the socket. Use these hooks to secure the string lights. You can use metal ties, zip ties, guide wires, or screws (not included) to attach the lights to structures like pergolas, fences, walls, or trees. Ensure the mounting points are sturdy enough to support the weight of the lights.
- Connecting Multiple Strings (if applicable): This model is connectable. If you have multiple sets, ensure the total wattage does not exceed the maximum capacity of your circuit. Connect the male plug of one string to the female connector of another.
- Bulb Installation/Replacement: The bulbs are typically pre-installed. If you need to replace a bulb, ensure the power is off. Gently twist the old bulb counter-clockwise to remove it. Insert the new G40 bulb by twisting it clockwise until snug. Do not overtighten.
- Power Connection: Once the string lights are securely installed and all bulbs are in place, plug the power cord into a standard electrical outlet.

Image 4.1: Example installation of Torkase LED Outdoor String Lights on a patio.
5. Operating Instructions
Operating your Torkase LED Outdoor String Lights is straightforward:
- Power On/Off: Plug the string lights into a power outlet to turn them on. Unplug them to turn them off.
- Dimming Functionality: These string lights are dimmable. To adjust the brightness, you will need a compatible external dimmer (not included). Connect the string lights to the dimmer according to the dimmer's instructions.
- Optimal Use: For best results and longevity, avoid leaving the lights exposed to extreme weather conditions for prolonged periods, despite their weather-resistant design.
6. Maintenance
Regular maintenance helps ensure the longevity and performance of your string lights:
- Cleaning: Disconnect the power before cleaning. Wipe the bulbs and cords with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: If storing the lights for an extended period, clean them thoroughly, coil them neatly to prevent tangling, and store them in a cool, dry place away from direct sunlight.
- Inspection: Periodically inspect the entire string for any signs of damage, such as frayed wires, cracked bulbs, or loose connections. Replace damaged components immediately or discontinue use if repairs cannot be safely made.
7. Troubleshooting
If you encounter issues with your Torkase LED Outdoor String Lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the outlet. Loose plug connection. Blown fuse/tripped breaker. Damaged cord/bulb. | Check the power outlet with another device. Ensure the plug is fully inserted. Check your home's fuse box/breaker panel. Inspect the cord and all bulbs for damage. Replace any damaged bulbs with the provided spares. |
| Some bulbs are not lighting up. | Loose or faulty bulb. Damaged bulb. | Gently twist each non-working bulb to ensure it's seated correctly. Replace the faulty bulb with one of the spare G40 bulbs. |
| Lights flicker or dim unexpectedly. | Unstable power supply. Incompatible dimmer. Loose connection. | Ensure the power supply is stable. Try plugging into a different outlet. If using a dimmer, ensure it is compatible with LED string lights. Check all bulb connections and the main power plug. |
| Water inside bulbs after rain. | Improper installation angle. Extreme weather conditions. | While IP54 rated, ensure bulbs are hanging downwards to allow water to drain. Avoid direct, prolonged exposure to heavy rain or standing water. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GLS-20J2P-G40-56 |
| Length | 33.5 meters (approx. 110 feet) |
| Number of Bulbs | 56 + 2 spare G40 LED bulbs |
| Bulb Type | G40 LED |
| Wattage per Bulb | 0.5 W |
| Total Power | 28 Watts |
| Color Temperature | 2200 Kelvin (Warm White) |
| Luminous Flux | 2400 lm |
| Voltage | 230 Volts |
| Lifespan | Approx. 30,000 hours |
| IP Rating | IP54 (Weather-resistant) |
| Dimmable | Yes (with compatible dimmer, not included) |
| Material | Plastic (unbreakable bulbs) |
| Connectivity | Connectable |
| Energy Efficiency Class | E |

Image 8.1: Detail of a Torkase G40 LED bulb.

Image 8.2: Energy Efficiency Label for Torkase GLS-20J2P-G40. For more details, visit the EPREL database.
9. Warranty and Support
Torkase provides a one-year warranty for this product, ensuring your satisfaction and peace of mind.
If you have any questions, concerns, or require assistance with your Torkase LED Outdoor String Lights, please do not hesitate to contact our customer support team. We are committed to providing a response within 24 hours.
For support, please refer to the contact information provided on your purchase receipt or the official Torkase website.