Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your HomeSpot Wireless Neckband Speaker and Bluetooth Transmitter Set. This system is designed to enhance your home entertainment experience by providing personal, immersive audio for television viewing and low-latency gaming.
The neckband speaker and Bluetooth transmitter are pre-paired for immediate use, offering seamless connectivity and high-quality sound without disturbing others.
Package Contents
Please verify that all items listed below are included in your package:
- HomeSpot HS-JY508 Wireless Neckband Speaker (x1)
- HomeSpot HD Audio Bluetooth Transmitter (x1)
- Charging cable (USB-C for neckband, Micro USB for transmitter) (x2)
- 3.5mm to 3.5mm Audio Cable (x1)
- 3.5mm to RCA Audio Cable (x1)
- Digital TOSLINK Optical Cable (x1)
- User Manual (this document)

Figure 1: All components included in the HomeSpot Wireless Neckband Speaker and Bluetooth Transmitter Set.
Product Overview
Neckband Speaker Controls

Figure 2: Neckband Speaker Control Layout.
- Play/Pause Button: Press once to play or pause audio.
- Volume Up / Next Song Button: Press once to increase volume. Press and hold to skip to the next song.
- Volume Down / Previous Song Button: Press once to decrease volume. Press and hold to go to the previous song.
- Power Button: Press and hold to power on or off.
- Type-C Charging Port: For charging the neckband speaker.
Bluetooth Transmitter Overview
The HomeSpot HD Audio Bluetooth Transmitter features multiple audio input ports (Optical, RCA, 3.5mm AUX) and a Micro USB power input. It has a Bluetooth pairing button and indicator lights for connection status.
Setup Guide
1. Charging the Devices
- Neckband Speaker: Connect the USB-C charging cable to the neckband speaker's Type-C port and the other end to a USB power adapter (not included). A full charge takes approximately 2 hours and provides up to 12 hours of playback.
- Bluetooth Transmitter: Connect the Micro USB charging cable to the transmitter's 5V DC IN port and the other end to a USB power adapter or a USB port on your TV. The transmitter requires continuous power to operate.
2. Connecting the Bluetooth Transmitter to Your TV
The transmitter supports multiple audio input options. Choose the one compatible with your television:
- Optical (TOSLINK) Connection:
Use the included Digital TOSLINK Optical Cable. Connect one end to the "OPTICAL OUT" port on your TV and the other end to the "OPTICAL IN" port on the Bluetooth transmitter. This connection typically offers the highest audio quality.
Note: Some TVs require you to change the audio output setting to "PCM" or "Stereo" when using the optical output. Refer to your TV's manual for specific instructions.
- RCA (Red/White) Connection:
Use the included 3.5mm to RCA Audio Cable. Connect the red and white RCA plugs to the corresponding "AUDIO OUT" ports on your TV. Connect the 3.5mm jack to the "AUX IN" port on the Bluetooth transmitter.
- 3.5mm AUX Connection:
Use the included 3.5mm to 3.5mm Audio Cable. Connect one end to the "HEADPHONE OUT" or "AUDIO OUT" 3.5mm jack on your TV and the other end to the "AUX IN" port on the Bluetooth transmitter.
3. Initial Connection (Pre-Paired)
The HomeSpot Neckband Speaker and Bluetooth Transmitter are pre-paired at the factory for your convenience. Follow these steps for the first-time use:
- Ensure the Bluetooth Transmitter is powered on and connected to your TV's audio output.
- Press and hold the Power button on the Neckband Speaker until you hear a power-on tone or see an indicator light.
- The neckband speaker will automatically connect to the transmitter. You should hear an audible confirmation "Connected" from the speaker.

Figure 3: Instant and lag-free audio experience with the pre-paired system.
Operating Instructions
Power On/Off
- To Power On: Press and hold the Power button on the neckband speaker for approximately 3 seconds until the indicator light illuminates and you hear a power-on tone.
- To Power Off: Press and hold the Power button on the neckband speaker for approximately 3 seconds until the indicator light turns off and you hear a power-off tone.
Volume Adjustment
- Increase Volume: Press the "Vol Up / Next Song" button.
- Decrease Volume: Press the "Vol Down / Previous Song" button.
The volume can be adjusted independently on the neckband speaker, allowing you to set your preferred listening level without affecting the TV's main speaker volume (if your TV supports simultaneous output).
Enhanced TV Viewing Experience
The HomeSpot Neckband Speaker provides a personal 360-degree surround sound experience with low latency, ensuring audio and video synchronization. This allows for immersive viewing without disturbing others in the room.

Figure 4: Enjoying immersive TV audio with the neckband speaker.

Figure 5: Illustration of the 3D surround sound capability.
Maintenance
- Cleaning: Wipe the neckband speaker and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the neckband speaker frequently. Charge it regularly, even if not in use for extended periods.
- Water Resistance: The devices are not water-resistant. Avoid exposure to liquids.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from neckband speaker. |
|
|
| Audio delay/lag. |
|
|
| Cannot connect to transmitter. |
|
|
Specifications
| Brand | HomeSpot |
| Model Name | HS-JY508-BUN128DV8 |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 10 Meters (approx. 33 feet) |
| Audio Latency | 60 Milliseconds |
| Speaker Type | Portable Neckband Speaker |
| Audio Output Mode | Stereo |
| Surround Sound Channel Configuration | 2.0 |
| Power Source | Battery Powered (Neckband Speaker), USB Powered (Transmitter) |
| Neckband Speaker Battery | 1 Lithium Polymer (included) |
| Battery Capacity | 500 mAh |
| Charging Time | Approximately 2 Hours |
| Playback Time | Up to 12 Hours |
| Item Weight | 1.06 pounds |
| Product Dimensions | 3"D x 2"W x 2"H (Approximate) |
| Material | Plastic |
| Water Resistance Level | Not Water Resistant |
Warranty Information
The HomeSpot Wireless Neckband Speaker and Bluetooth Transmitter Set comes with a limited warranty. Please refer to the warranty card included in your package or visit the official HomeSpot website for detailed terms and conditions regarding warranty coverage and claims.
Support
For further assistance, technical support, or to provide feedback, please visit the HomeSpot official store or contact their customer service. You can find more information and contact details on the HomeSpot brand page on Amazon or their dedicated support website.
HomeSpot Store Link: Visit HomeSpot Store